Jump to content

Wheel Thread!


ASH-VDS

Recommended Posts

Spigot rings aren't load bearing as such, they just centre the wheel on the hub. So long as the bolts are correctly torqued and the correct fitment is used they'll be fine on track. Although they look like cheap bits of plastic they must be made of something that doesn't melt. BBS use metal spigot rings which are bound to be better.

Spacers throw up a few question marks. So long as they're high quality, the bolts are correctly torqued and you don't bounce off the kerbs they should in theory be ok. If you're ultra competitive and have a fondness for the kerbs I think they'd best be removed and kept for road use only!

Thanks mate really appreciate the info. Think I will try getting a perfect fit without spacers. Really narrows it down!

Link to comment
Share on other sites

Thanks mate really appreciate the info. Think I will try getting a perfect fit without spacers. Really narrows it down!

Start a thread and throw some suggestions in as to what styles you like. There's lots of experience on here.

There's a very long aftermarket wheel thread on golfmk7.com which will throw up more examples of what looks a bit rubbish on a mk7 than what looks good but there are a few nice ones on there.

 

Felgenoutlet.de is a great place to see a full range on your car

Link to comment
Share on other sites

Other thing to bear in mind is weight. Stock 18" Cadiz are heavy lumps and this does make a big difference to the car. I've been messing around with wheels on mine for a year since i bought the R and below's a few bits of info I've picked up along the way that might be useful.

 

Stock 18" Cadiz with Potenza 225/40R18 - 21.04KG

BBS SR with Michelin Crossclimate 225/50R17 - 20.30KG. (my current winter wheels formerly on my Seat Xperience. SR's also pretty heavy)

Oz Ultras with Goodyear F1 Assymetric 3 225/45R18 - 18.00kg.

 

I've also put 2 piece lightweight discs on the front which saves another 2.33kg over stock so with the Oz's save 5.37kg rotating mass on each front wheel against stock.

 

Turn in much quicker, suspension just seems to work better and as a bonus the initial acceleration and in gear pickup is much sharper.    

Link to comment
Share on other sites

Other thing to bear in mind is weight. Stock 18" Cadiz are heavy lumps and this does make a big difference to the car. I've been messing around with wheels on mine for a year since i bought the R and below's a few bits of info I've picked up along the way that might be useful.

 

Stock 18" Cadiz with Potenza 225/40R18 - 21.04KG

BBS SR with Michelin Crossclimate 225/50R17 - 20.30KG. (my current winter wheels formerly on my Seat Xperience. SR's also pretty heavy)

Oz Ultras with Goodyear F1 Assymetric 3 225/45R18 - 18.00kg.

 

I've also put 2 piece lightweight discs on the front which saves another 2.33kg over stock so with the Oz's save 5.37kg rotating mass on each front wheel against stock.

 

Turn in much quicker, suspension just seems to work better and as a bonus the initial acceleration and in gear pickup is much sharper.

I'm sure I read somewhere the revo wheels were only 10kg, how much would that be with tyres?

 

Sent from my SM-G935F using Tapatalk

Link to comment
Share on other sites

I'm sure I read somewhere the revo wheels were only 10kg, how much would that be with tyres?

 

Sent from my SM-G935F using Tapatalk

Sounds about right for Revos. As an example, 18" cadiz 10.34kg, 18" Ultras 8.20kg, 18" Advan RS2 8.00kg, 19" Prets 10.00kg.

 

 For 225/40R18 tyres, weights between 10.40kg for Potenzas and lightest I saw were P Zeros at 9.10kg.

 

Weights I posted in previous post were weighed by me and were for well worn Cadiz/Potenzas and part worn BBS SR/Mich Cross Climate. Ultras/Goodyears were new. 

Link to comment
Share on other sites

What is the lightest 19" wheel out there then?

 

Sent from my SM-G935F using Tapatalk

I don't run 19's but based on info for 18's, all the Leggera range are in low to mid 8kgs. Advan RS2 8.00kg. I've excluded forged wheels which can be lighter/stronger but way too expensive for me. Most BBS non forged pretty heavy but strong. VWR Racing (aka Team dynamics) pretty light at 8.90kg.

Oz Allegerita are only 7.72kg but they don't do them in 19.

There's loads more light wheels out there. Best resource I found for wheel and tyre data is Tire Rack in the U.S.

Link to comment
Share on other sites

Think some of the Japanese wheels may be worth a look

 

Sent from my SM-G935F using Tapatalk

Yeah you're right. I saw quite a few I fancied but getting hold of them in the UK sometimes difficult and expensive for what they are. Ray's in particular have a brilliant range but cheap they are not.

Another reason I've stuck with European manufacturers was that you generally get TUV certification so insurance companies don't have another hole to wriggle through. Oz say that the Allegerita HLT is lightest wheel around with TUV cert. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...