Acew Posted February 4, 2015 Report Share Posted February 4, 2015 I'll be getting my R in a few weeks (hopefully) and wanting to clean it by hand and take pretty good care of it. My wife is keeping our 2 year old BMW that hasn't always been cleaned with loving care so hopefully I can get this up to scratch too. When I first got the BMW I had good intentions so bought the buckets, and meguiars stuff but standards have slipped as of late. Currently I have got 2x buckets Meguiars gold class wash Meguiars lambswool mit Gtechniq c2v3 (after starting to read up about what products to buy but not used yet) Large microfibre drying cloth. I've got a young family so don't want to commit too much time which is why c2v3 looked good to me. Should I be looking for some sort of polish for applying before c2v3? Also any other products that are must haves? Quote Link to comment Share on other sites More sharing options...
mickR Posted February 4, 2015 Report Share Posted February 4, 2015 Pressure wash first to remove dirt/grime, use traffic film remover or snow foam as you see fit, Apply very light pressure when washing with mitt, don't waste money on expensive products, as most (if any) are not independently scientifically tested. I have used Autoglym for many years, easy to apply and polish off and leaves what I consider to be a good finish. You could look at detailing world.co.uk for more info Quote Link to comment Share on other sites More sharing options...
invisiblekid Posted February 4, 2015 Report Share Posted February 4, 2015 I would recommend a couple of Meguiar's water magnet drying towels. By far the best I've used. http://www.amazon.co.uk/dp/B0009IQZFM Quote Link to comment Share on other sites More sharing options...
R400 Posted February 4, 2015 Report Share Posted February 4, 2015 De-iron and de-tar. Prewash. Wash. Clay. Wash. Polish. Wash. Glaze. Seal. Wax. Rewax. QD. Storry 1 Quote Link to comment Share on other sites More sharing options...
MIGLIOR Posted February 4, 2015 Report Share Posted February 4, 2015 De-iron and de-tar. Prewash. Wash. Clay. Wash. Polish. Wash. Glaze. Seal. Wax. Rewax. QD. Where are you getting this miss information?! Mainframe and leonmac 2 Quote Link to comment Share on other sites More sharing options...
Acew Posted February 5, 2015 Author Report Share Posted February 5, 2015 De-iron and de-tar. Prewash. Wash. Clay. Wash. Polish. Wash. Glaze. Seal. Wax. Rewax. QD. That sounds like too much work to be honest. I'm thinking something like 30 mins weekly washes and spending an hour or so now and then. I've got a pressure washer.so would it be worth buying a snow foam lance? Also seen various talk of c2v3. Should I apply the first coat neat then dilute as a drying aid going forward or is the first coat ok diluted as a drying aid? I did have a look on detailing world but I think it's a bit hardcore for me on there Quote Link to comment Share on other sites More sharing options...
savage16v Posted February 5, 2015 Report Share Posted February 5, 2015 You sound fairly similar to me, although I plan on a week of evenings on the car for its first detail. My plan is: Wash with Dodo juice Born to be mild or Auto Glym Shampoo Iron-XRinseMeguiars Clay bar (including windows)Wash with Dodo Juice Born to be mild or Auto Glym ShampooPolish with Blackfire gloss enhancing polishThen apply Gtechniq C2v3 crystal sealantThen apply R222 Concours look wax Not sure about a wax after the C2v3, getting conflicting advice on this. Quote Link to comment Share on other sites More sharing options...
Limey Posted February 5, 2015 Report Share Posted February 5, 2015 http://www.vwroc.com/forums/topic/6610-diy-new-car-detail/ Dave Quote Link to comment Share on other sites More sharing options...
Mainframe Posted February 5, 2015 Report Share Posted February 5, 2015 I spent some time lurking on DW, but also asked, watched and followed pros. couple of observations, - grit guards are not really necessary if you rinse mit in clean water in between soap. - use different mit for body than for wheels and lower panels sills. - clay bars dangerous in wrong hands. Hard to use in cold. Try the new composite rubber flex pads Speedy Surface Flex which rinse easily and do not carry particles. Lubricate well. Did my wife's car all over in 15 mins. I wouldn't clay my G7 unless it was going to by machine polished afterwards. People tend to over clay. - getting wax to go off in cold damp can lead to smears or necessitate harder rubbing, which is not good for paint. - ditto washing and drying too often. - C2v3 is a last coat. No need for anything afterwards. It can go over wax, or (better imho) othe nano sealant, or (quickest) straight onto clean decontaminated paintwork (where it will still last longer than any wax I ever used) ie no wax or sealant. - detailing over several nights risks car gathering dust n grit in between sessions. i Quote Link to comment Share on other sites More sharing options...
NoveltyBobble Posted February 5, 2015 Report Share Posted February 5, 2015 Once the car has had a new car prep, either by a pro or yourself if you've the time and patience, then a weekly/bi-weekly wash should be a relatively quick maintenance task of: - Snow foam and soak - Clean water wash off to give a hands free initial clean to remove grit. - Two bucket wash with a shampoo of your choice. Personally I tend to go a decent brand in the vague hope it's not ripping off any existing product. The Meguiars mitt is my preferernce http://www.amazon.co.uk/gp/product/B001MPW5IC?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 - Another clean water pressure wash off - My tip of the day, is using a water blade to quickly remove the water: http://www.amazon.co.uk/gp/product/B0011DYB9G?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00 Highly recommend. - Then use the drying towel: http://www.amazon.co.uk/gp/product/B0009IQZFM?psc=1&redirect=true&ref_=oh_aui_detailpage_o06_s00 - A quick detail spray of your choice, whether that's GTechniq or DoDo juice. Whatever takes your fancy. Ultimately how you end up doing it probably doesn't matter so much as you do it on a regular basis. I find doing the above only takes about 1/2 hour, and that's with the bind of having to walk back and forth to the house to fill up my cordless pressure washer. Quote Link to comment Share on other sites More sharing options...
Acew Posted February 5, 2015 Author Report Share Posted February 5, 2015 That's some great advice so far. I think I'm getting a decent understanding now. Is it advised to apply some sort of cleaner or polish before the c2v3? If so are there any recommendations? After a quick look about I was thinking may Dodo lime prime but this may be completely the wrong thing. Quote Link to comment Share on other sites More sharing options...
R400 Posted February 5, 2015 Report Share Posted February 5, 2015 That sounds like too much work to be honest. I'm thinking something like 30 mins weekly washes and spending an hour or so now and then. I've got a pressure washer.so would it be worth buying a snow foam lance? Also seen various talk of c2v3. Should I apply the first coat neat then dilute as a drying aid going forward or is the first coat ok diluted as a drying aid? I did have a look on detailing world but I think it's a bit hardcore for me on there The trick is to spend a whole day doing it properly the 1st time (as above). Set the "base". And then the 2nd to 50th times for the rest of the year become much easier. A properly detailed car can be maintained in less than 1hr of washing and waxing every month or fortnight. Quote Link to comment Share on other sites More sharing options...
SithOllie Posted February 5, 2015 Report Share Posted February 5, 2015 The trick is to spend a whole day doing it properly the 1st time (as above). Set the "base". And then the 2nd to 50th times for the rest of the year become much easier. A properly detailed car can be maintained in less than 1hr of washing and waxing every month or fortnight. Could you post some pics of you cleaning yours? Lawrie 1 Quote Link to comment Share on other sites More sharing options...
Limey Posted February 5, 2015 Report Share Posted February 5, 2015 Never heard anyone recommend the blade before! Thought they were a sure fire way to grove armarda? Dave Quote Link to comment Share on other sites More sharing options...
NoveltyBobble Posted February 5, 2015 Report Share Posted February 5, 2015 Never heard anyone recommend the blade before! Thought they were a sure fire way to grove armarda? Dave Any old blade yes. But the Autoglym is as soft as a babys bum. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.