Max Schnell
Members-
Posts
49 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by Max Schnell
-
My car is 7 Years old this August, long term maintenance.
Max Schnell replied to Gavras's topic in VW Golf R MK7 Chat
Adding another date point here: Had my R for 9 years now, most of that with a stage 1 tune and still running beautifully, albeit with the obligatory water pump and haldex change. I also plan on keeping it as long as possible. My advice would be to continue keeping on top of the maintenance as scheduled, for general usage here in Canada it's (mostly) based on km, except things like brake fluid. However, I mostly do my own maintenance (saving a boatload of labour charges) and I tend to do a few things a little sooner for peace of mind e.g oil & filter @10K vs 15k, plugs @60K vs 90K, Haldex @ 45K vs 90K Air filter @ 60K vs 90K Diffs (not Haldex) are supposed to be 'lifetime' fluids, but my trusted VAG specialist shop says '80K, especially if the car is tuned/driven hard. I would change the PCV valve if not done already, but hoses I wouldn't worry about unless there are visible indications that say otherwise, or real world data showing a significant failure rate. Exhaust is still going strong, even with the harsh winters and copious amounts of salt here[emoji106] That's about all I can think of right now, obviously as time and mileage ticks up regular checks for condition of belts, tensioners etc becomes more critical. Enjoy the car [emoji846] -
A little out of left field here, but could this not just be the DSG box doing DSG 'things', it can definitely get a little confused at times, and bog down (because it thought you wanted to be in the next higher gear but has to change to a lower gear based on pedal demand) and then take off like a scalded cat! Particularly in D you sometimes have to anticipate this TCU 'logic'. This could also explain a 'clunk' (from the drivetrain).... If not, carry on.... 🙂
-
Here in Canada we now have an official VW recall for this trim piece due to the sharp edge slicing more folks than Freddie Krueger....
-
1. Yes 2. No /endthread. Longer version: 1. Depends on your version of 'worth it'. It probably won't give you the same performance bump as a tune but it's in the ballpark and really great bang for the buck. You can use the off-the-shelf maps or create a custom map. Burger Motorsports (George specifically) support is the best i've encountered, period. Plus you can always resell the unit and make some money back. 2. If you remove the unit prior to a dealer visit (i.e.so the dealer doesn't physically see it), there won't be any trace when the car is hooked up to their computer, it's designed to work within the regular ECU parameters so the computer sees no irregularities. Personally, I have a JB4 (with no other mods), the extra oomph is grin-inducing, the car is ridiculously quick now for public roads, I have to give my wife a warning if i'm going to floor it LOL. I have also had to return to the dealer for warranty work (coolant sensor replacement and camshaft actuator replacement), and while I fully accept the 'pay-to-play' aspect of tuning, it's easier to get work like this done than having a flash tune, being automatically flagged TD1 and then having to battle to get any powertrain work done that is unrelated to the 'tune'. There's a bunch of threads on this forums, or Golfmk7 or VWVortex, with lots of info.
-
Had a camshaft actuator replaced under warranty, had been throwing a CEL every now and again for the last few months.
-
Mk2 VW Golf Peugeot 405 GRi 89 Peugeot 405 Mi16 90 Peugeot 405 Mi16 Mk2 Renault 19 16v 01 Subaru Impreza RS 09 Subaru Impreza Sport (hatch) Mk7 VW Golf R
-
In Canada the passenger seat is not fully electric, so the tray can be added on that side, there's a thread somewhere, probably on Vortex.
-
Mk7R - How to Swap MIBII Infotainment 6.5" Screen to 8"
Max Schnell replied to Max Schnell's topic in Guides and How To's
First post updated with my infotainment info that works with part number 5G0919606, and some more precision about the touchscreen test - although that's another 'How to' topic in itself. -
Mk7R - How to Swap MIBII Infotainment 6.5" Screen to 8"
Max Schnell replied to Max Schnell's topic in Guides and How To's
No idea, I know zero about MIB 1. -
Mk7R - How to Swap MIBII Infotainment 6.5" Screen to 8"
Max Schnell replied to Max Schnell's topic in Guides and How To's
Yep, it would be a full retrofit, this thread should give you an idea of the scale of it: https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fforums%2Evwvortex%2Ecom%2Fshowthread%2Ephp%3Ft%3D7466330&share_tid=7466330&share_fid=7951&share_type=t -
You mean the radiators?
-
??? The air intake is at the top of the grill, the only way to make it higher would be to fit a snorkel......maybe there's your solution [emoji106] It's the automobile version of Russian Roulette [emoji1]
-
Due to popular demand.......well, a few people.......well, one person........maybe...... Swapping an MIBII Infotainment 6.5" screen to 8" Intro: This swap was done on a 2016 Canadian Golf R with the MIBII Discover Media Infotainment system. It's basically a plug & play swap with a minor modification to one connector. Part number info is discussed towards the bottom of this post. Removal of Existing Trim & screen: For removing the trim I used this description and video link that I found on another forum: "Get your fingers in and under the aircon surround. This needs to come off first as the radio/vent trim has tabs that locate underneath the aircon trim. Once the aircon trim is off, carefully prise the upper radio trim out. The vents should come along too, but sometimes the trim detaches from the vents. That doesn't matter, you can join them up easily for reassembly. The touchscreen itself (that's all it is by the way, a completely flat unit) comes out with four little metal tabs. Use a small flatblade screwdriver and move the four tabs toward the centre of the screen and it will come out. There are markings on the black plastic to identify the location of the tabs, but they are visible anyway..." Notes: If you don't have the VW screen removal tools and are using the screwdriver mentioned above, just pull gently on back of the screen at the corner you are pushing the tab with the screwdriver, the tension will help stop the tabs clipping back into place. The two connectors on the back of the screen are easy to unplug. You will also have to unplug 2 connectors from the hazard switch/airbag warning light unit before the trim with the air vents comes away. The lower one is easy but the upper one is a bit of a pain, I found it easier to attack from underneath with some long nose pliers to pull out the red locking tab before pulling on the connector. The One Modification You have to make a minor modification to one connector i.e. you have to shave one of the tabs to make it fit the 8" screen socket, it's easy to identify which one if you try to mate it up with the socket on the 8" screen, the photo below shows the tab I removed using a sharp knife: Installation of the 8" Screen and Surround Trim Make sure that all the metal receiver clips remain in the dashboard, a few were attached to the trim that I removed. Basically put it all back in reverse order, the screen just pushes in and clips in at the 4 corners. Part Number info: I sourced parts based on a VIN for a Canadian 2016 R with Tech package (which has the 8" screen). - Piano black surround trim (comes with air vents), part # 5G1819728-AFQYI - I picked this up new from my VW dealer (with a 25% discount). - 8" screen - Either 5G0919606 (Euro version) or 5G0919606B (US version), functionally identical just different button labels: Originally I picked up 8" screen part number 5G0919606B based on the VIN mentioned above, this is what other forum users had also used successfully so why not?. While everything worked, the screen calibration was off. Having heard talk of the 'green service menu' I found and enabled 'Developer Mode' using VCDS. In the settings there is a 'Touchscreen Test', on the pic below see where I'm touching versus where the screen is registering the touch (pink square): I had seen one other instance of this on another forum but the poster never found a solution, I was also drawing a blank on various VW forums and also the Ross-Tech forum. However, figuring it was a software/hardware incompatibility issue I took a chance and picked up an older (used) version of the screen: - part # 5G0919606 off Ebay.de (299 Euros from happyparts_de) and it works perfectly. The only slight difference is that the 'INFO' button says 'TRAFFIC' and the 'BAND' button says 'RADIO', but I can live with that to have 8 inches EDIT: After 7 months of waiting VW finally confirmed that the original screen was faulty and so should have worked, i've updated the part number info accordingly. Q&A Here are a few questions i've received or I think may be asked: Q. Any issues with component protection? A. The screen is only used for display and making selections, any copyright protection is done in the main guts of the system which is untouched. Q. Does it suffer from a poor resolution when fitted? Does it just scale everything up making it pixelated or does it make everything fit nicely? A. Resolution is identical between the 6.5" & 8" screens, hence the reason it's plug & play. It's not so large that it's pixelated though, see photo above. Q. Is the aspect ratio correct? A. Yes, because it's the same resolution. Q. Can I swap my 5.8" or MIBI screen to 8"? A. I don't believe so without doing a complete infotainment retrofit. From what i've read there is incompatibility somewhere, either resolution, software etc. Q. Where can I buy the parts from? A. The trim I bought new from my VW dealer. I got my screen (used) from Ebay.de (happyparts_de), but you could also try e-Acca, amb-trade.de or others. Do not get the screen new from VW, you will want to cry when you hear the price I hope this helps.
-
Yes, I've done it. It does NOT work on the 5.8" screens probably for that reason. Just search eBay for the part number, no spaces, no dashes, I was getting lots of hits. I'm going to start a specific thread tomorrow. EDIT: Dedicated thread started (with more info) in the "How to" section: http://www.vwroc.com/forums/index.php?/topic/16978-Mk7R---How-to-Swap-MIBII-Infotainment-6.5"-Screen-to-8"
-
I'm not the first, I got the idea from a few others on another forum, but I'm (one of?) the first to sort out the touchscreen calibration issue, most people don't encounter it. The screen is just for display and making selections only, any copyright protection is done in the main guts of the system which is untouched.
-
Ok, 6.5" screen swap to 8"... Background: This swap was done on a 2016 Canadian Golf R (i'm originally from the UK but defected to Canuckistan 15 years ago) but should apply to any MIBII unit as the 6.5" & 8" screens have the same resolution. It's always bugged me how neutered the Golf R is here in North America compared to the ROW, in Canada as standard we got 19" alloys, leather, and MIBII with Discover Media, but missing things like sunroof, LED rear lights, folding mirrors, spare tyre(!) etc. I've slowly been retrofitting all this stuff with the exception of the sunroof. Also, they only started arriving as a 2016 model in June 2015. The only option available when I bought mine was the 'Tech Package' which is basically all the DAP stuff plus the Discover Pro infotainment system with the 8" screen. I absolutely did not want the DAP and so was not willing to spring over $2000 for just the 8" screen. Moving on... For removing the trim I used this description and video link that I lifted from another forum: "Get your fingers in and under the aircon surround. This needs to come off first as the radio/vent trim has tabs that locate underneath the aircon trim. Once the aircon trim is off, carefully prise the upper radio trim out. The vents should come along too, but sometimes the trim detaches from the vents. That doesn't matter, you can join them up easily for reassembly. The touchscreen itself (that's all it is by the way, a completely flat unit) comes out with four little metal tabs. Use a small flatblade screwdriver and move the four tabs toward the centre of the screen and it will come out. There are markings on the black plastic to identify the location of the tabs, but they are visible anyway..." https://www.youtube.com/watch?v=2r_sZGe8Ato You will also have to unclip 2 plugs from the hazard switch/airbag warning light unit before it all comes away. Then you have to make a minor modification to one plug i.e. you have to shave one of the harness plug tabs to make it fit the 8" screen socket: For the parts: Piano black surround trim (comes with air vents), part # 5G1-819-728-AFQY - new from dealer with discount. That was the easy bit. For the screen, originally I picked up part number 5G0-919-606-B, as this was based on the VIN for a Canadian 2016 R with Tech package (so 8" screen). While everything worked, the screen calibration was off and I couldn't find a solution. Going into the service menu I selected the touch screen calibration test (can't remember the exact title), on the pic below see where I'm touching versus where the screen is registering the touch (pink square): Figuring it was a software/hardware incompatibility issue I took a chance and picked up an older version of the screen, 5G0-919-606 off eBay.de (299 Euros from happyparts_de) and it works perfectly. The only slight difference is that the 'INFO' button says 'TRAFFIC' and the 'BAND' button says 'RADIO', but I can live with that to have 8 inches
-
On my Canadian R (don't see why the UK bumper would be any different) there are about 8 screws/bolts to remove underneath, and 4 smaller ones inside each wheel arch. Then you have to remove the rear lights, from inside the boot you unplug the light harness and unscrew the plastic wing nut to allow you to pull the light out. This uncovers the final clips to be prised off and you can pull the bumper away. Hope this helps.
-
From comparison testing by users over on VW Vortex, the P3 is about half a second optimistic compared to more sophisticated timing equipment e.g. Vbox.
-
I always have problems trying to photograph them against the dark wheels & tyres, but here's a few threads/links with some photos. The Rokblokz are good in the fact that you don't have to put the logo on if you don't want to, and the lateral positioning is adjustable so you can having them sticking out less or more to suit your preference. http://forums.vwvortex.com/showthread.php?7483497-Longer-VW-screws-for-mud-flaps&highlight=rokblokz http://forums.vwvortex.com/showthread.php?8128954-Mudflaps&highlight=rokblokz http://rokblokz.com/vw-golf-mk7-15.html
-
I don't know if you can get 'em in the UK, but here in NA both Rally Armor & Rokblokz offer R-specific mudflaps. The RA are fairly rectangular and probably better suited to a Scooby or Evo, but the Rokblokz (which I have) are more profiled to follow the lines of the car. I put them on when I swap to my winter wheel/tyre setup as lots of gravel gets thrown down on the roads as well as the salt. I only have one pic on my phone but here you go: