It’s hard to say as I had the deadset kit done at the same time as the engine mounts, but there is more noise - no vibration that I have noticed but the car is much better at changing direction now and also feels more stable at speed Sent from my iPhone using Tapatalk Pro
Yeah that’s the rear one I have (might be more looks than stiffness but hard to tell) the front can be added post alignment as it just takes any possible play out between the top struts Sent from my iPhone using Tapatalk Pro
Personally the stiffer the car the better the suspension can work likes it’s supposed to without body flex - I also have a front strut brace and racing line rear brace fitted - definitely not skittish Sent from my iPhone using Tapatalk Pro
The engine mounts can be - that’s the way I did them - the subframe deadset kit once in doesn’t allow for any movement of the subframe so might need to check alignment for that just to confirm it’s still ok Sent from my iPhone using Tapatalk Pro
I have very nearly that exact handling set up with a few other bits Ohlins R&T SuperPro rolls bars and end links front and back SuperPro lower control arms SuperPro engine mount kit (very effective) SuperPro top mounts (very effective) SuperPro rear bush kit Tyrol subframe deadest kit Very good fast road set up with occasional track outing Sent from my iPhone using Tapatalk Pro
I have had the superpro top mounts fitted for about a year now, they are fixed mounts but offer additional negative camber over standard and made a huge difference - the only nvh I would say if going over pothole type surface when it’s more noticeable Sent from my iPhone using Tapatalk Pro
That’s not the case, I have the TVS tune and as long as the gear lever is pushed over to the left then you have full manual whether you use the paddles or gear lever Sent from my iPhone using Tapatalk Pro
TVS tune all the way - Awesome, CLP, Ecotune are (if not already) gonna be suppliers of their DSG software. Peron are the main UK dealer / distributer for TVS now
I have just added the front ARB along with Superpro engine mounts (already had the rear ARB and Superpro lower control arms and Ohlins shocks) and the handling has really tightened up now while still allowing the shocks to do their thing - it really has made a significant difference to how flat the car corners. I was on the fence about the front ARB for along time but am really glad I did it now 👍
Brilliant info, thanks - will see what they recommend about modifying the shields but will probably leave them off - thanks [emoji1303] Sent from my iPhone using Tapatalk Pro
Thanks [emoji1303] kept up really well especially considering the company we were keeping - surprised quite a few of them [emoji2] Sent from my iPhone using Tapatalk Pro
Hi Graeme,
Getting my AP brakes fitted next week, do you know if you kept the dust/heat shield guard behind the discs or did it have to come off?
Cheers, Steve