Jump to content

FrankTheBunny

New Members
  • Posts

    12
  • Joined

  • Last visited

Recent Profile Visitors

634 profile views

FrankTheBunny's Achievements

Member

Member (2/9)

5

Reputation

  1. I was around 6,000 miles when my clutch started to slip w/ a JB1. I know there are folks who have gone over 10,000 miles with Stage 1 without any issues, and I've seen 1 or 2 users who are running Stage 2 w/ the stock clutch. How,ever they seem to be in the minority (possibly earlier builds too). For me, it hasn't been a "horror story" - I knew there was a chance of it when I put the JB1 on, and now that I'm Stage 2 I'm glad I have a stronger clutch on there. Would I rather have a stronger OEM clutch that didn't need replacing? Of course - but I'm still 100% happy I went w/ the MT over the DGS b/c I know I'd miss rowing through the gears. If you think of it as a $2,000 mod (not sure what the UK cost would be) that you know will be needed w/ your tuning, just weigh that against how important the MT driving experience is to you personally. As everyone is quick to point out, the DSG is faster - so throw that into the mix. For ME, it's still a no-brainer.
  2. I believe your "98" is the same as our "93" which is what I'm running. RON vs AKI or something like that
  3. I have the RSR Clutch from HS Tuning, and after about 100 miles, that thing feels almost identical to the stock clutch. Zero judder/chatter/noise. I understand (as someone stated earlier) that it can be costly to import for you guys (I'm in the US) but just wanted to let you know there are oem-like options out there.
  4. Ahh - good to know. So clearly some dealers treat that as an actual requirement.
  5. Well, that says "required to meet the high output power figures" - they're talking about their advertised numbers, it doesn't say it's required to get the tune. The US site also says the same thing (I missed that when I was looking at the site before). It also says "An upgraded intake is required to meet the advertised low and medium output power figures" and that is clearly not a requirement to get any of their tunes. Perhaps that's where the impression came from that it's required for the tune.
  6. All I know for sure is that my dealer (in the US) didn't even mention it. I asked him about it, and he said as long as I had the downpipe, I was fine. Looking at APR's site, under the pricing section they have "minimum requirement" for Stage 2 as a "high flow downpipe". They do not mention any tune-specific requirements for the high torque map. The only place you see an intercooler mentioned is in the specs for the dyno they provide. I'm FAR from an expert here - but this seems like one of those cases where something has been repeated often enough that people accept it as fact. I've seen plenty of posts saying that it is in fact an actual "requirement" but I haven't seen any posts where a user said they were refused the high torque b/c they didn't have an upgraded intercooler. You would think that APR would list that as a requirement on their site, especially since they have a profit motive for driving people towards purchasing their intercooler along w/ the tune.
  7. I'm not sure if APR's official stance is an IC is "required" for Stage 2 High Torque. I know on their website they show their dyno numbers with it - but I couldn't find anywhere it says it is required. I just had my car tuned w/ the High Torque file w/out an upgraded intercooler. It's on my list of future upgrades, for sure. I know the community seems split as to whether you SHOULD upgrade that (with any tune) - but it definitely does not seem to be an actual "requirement" for Stage 2.
  8. My JB1 was too much for my R. I was getting clutch slippage at 6k miles. I had an RSR clutch put in, and have since upgraded to the JB4. I've read many comments from folks who had a JB1 without any clutch issues, not sure about JB4, but I know it puts out a lot more torque on the normal settings. You might be able to use a custom Map 6 to limit the torque appropriately to preserve the stock clutch. If you're in the "I can afford a new clutch, but I'd rather not..." camp then I'd say roll the dice & plan on goign with a clutch friendly Map 6 setting. If putting a new clutch in would break the bank, I'd suggest you stay w/ the stock power/torque.
  9. Mine started slipping w/ the JB1, at about 6,000 miles. I went w/ the RSR Clutch Kit, loving it so far. To add to what Ddm_Historics said above, in one forum poll about tuning & clutch slip (not specific to JB1) it sounded like it was mostly folks with 2015 MK7s that had tunes w/out slipping. For what it's worth, mine is a 2016. There are a ton of factors involved, but I think any MTs need to at least be prepared for the possibility of a new clutch when adding torque.
  10. I use ProClip's plate, and the Scosche magnetic mount together. Works great. The ProClip is very sturdy, and easily removable, with zero adhesive in contact with the car (only between the plate & the mount). I used a couple different magnetic vent-clip models before, but they all failed eventually with the constant on & off. https://www.amazon.com/dp/B00I608BJ8/ref=cm_sw_r_cp_apa_ebytyb0WFVPAM
  11. I have a set of VMR V810 wheels in gun metal that were just delivered this morning... unfortunately they won't be going on my Limestone Grey R until the spring (keeping the Cadiz on for winter tire setup). If you still haven't made a decision by the time March/April roll around... I can post a pic.
  12. Can you simply disconnect the sub (and the strap) if you want use of the full space for hauling gear?
×
×
  • Create New...