Jump to content

Captain Caveman

Members
  • Posts

    80
  • Joined

  • Last visited

Everything posted by Captain Caveman

  1. That's just the way they map it to overfuel slightly on overrun.
  2. I have both an R and a 2013 e92 M3 Comp Pack. The M3 is special, full stop. I had a new GTR before it, and despite its super performance, I found it lacking in character. The M3 is a gem. Very few high revving V8 have ever been produced, so owning a racer derived V8 that revs to 8.5k is just sublime. The looks, the handling balance, the steering precision, the responsiveness of the engine, and the the noise, make it simply one of the best road cars you can buy. Owning the GTR, made me realise that speed alone isn’t what makes a car enjoyable to drive. The M3 is more fun, more of the time, and you can actually get close to its limits on the road, and the handling demands more skill from the driver to get the most from it. It’s funny, as the M3 is a great car, despite it not being very fast. I am convinced that my stock R is probably quicker point to point than the M3 due to the power delivery, and 4WD traction. yet the M3 is much more fun, rewarding and engaging to drive. You also don’t need to wring its neck to enjoy it. The character, sound and response of the engine make it a delight even at low speeds, and make it truly feel special. I don’t believe an engine such as this will ever be put into a mere mortal car ever again, it feels like it should really sit in something more supercar like, which is half the draw. If you gauge a car by it’s 0-60 time, and straight line performance mostly, then the M3 won’t be for you. But, if you look for all the delicate nuances that separate a good from a truly great car (balance, noise, feel, handling, visceraility) then you will fall in love with the M3. I will never sell mine…
  3. Ive done the APR shifter 42D shifter bushings and the shifter bracket and bracket bushings. Don bother with the bracket and bushings, as I didn't notice any difference with those. The shifter and shifter bushings make a great difference. Fitting is simple enough, but fiddly, so you need to take your time. It also takes time to just the shifter cable afterwards to get the gear lever in the right position, so allow for that too. If you need any advice PM me - happy to help.
  4. You don't need to buy VWR spacers specifically. Any spacer in 5x112 and 57.1mm centre bore will fit. There are loads of suppliers on ebay, at a fraction of the cost. All a spacer is a flat disc that has been machined to a certain spec - you're not getting any functional advantage by paying more in this case, unlike other components.
  5. Here you go, took some pics yesterday: https://1drv.ms/f/s!AtttNJLuVL2egXI8MnJCdR7fDM0M
  6. H&R ones don't need lubing, so all good. Have them on my RS6 and have never had issues. I fitted the rear ones first and tbh didn't notice that much difference. Then I fitted the front ones, and boy what a difference! Moral of the story, if you're gonna do them, you need to do both for it to be worthwhile. The rears are easy to do, but the front needs the subframe to be dropped a little so you can remove the ARB and slot in the new one. You really need a ramp for this, so not worth attempting DIY.
  7. The coilovers came with different length front drop links to allow for the difference in drop with coilovers, but have left the rear standard. The H&Rs come with uprated polyurethane bushes, which help to crispen up the response too.
  8. The H&Rs are the thickest ones available for the Golf R, 27mm front and 25mm rear. If you buy them in the UK you can pay up to £380 for a set, however I bought mine from Germany, and paid about £250 inc shipping. I bought mine here - they arrived in 3 days: https://www.derautoladen.eu/Federn-und-Fahrwerke-Fahrwerks-Zubehoer-Stabilisatoren-H---R-VA---HA-H-R-Stabilisator-VA---HA-Set-33851-8-fuer-AUDI-SKODA-VW-Fahrdynamik-Fahrwerk-Stabi.html
  9. Continuing on my quest for optimised handling and steering responsiveness, I fitted H&R front and rear ARBs yesterday, to complement the coilovers and camber plates that I fitted a while back. The difference in steering and chassis control and response after the coilovers was marked, and instantly firmed up the rather lazy and soft feel of the car. However fitting the ARBs has made yet another leap in improved turn in, resistance to roll and taken the remaining slack out of the steering and direction changes. Having owned Evos and a GTR, the bar has been set quite high handling-wise, and I've been trying to recreate the instant response that those cars provided. The H&R ARBs have really done that, and the car simply LOVES to change direction and tackle a series of rapid direction changes. Overall, I am impressed how much a handling improvement Ive managed to achieve from a few basic mods. It drives literally like a different car. Granted the mods aren't for everyone, and the ride is decidedly firm now (but not crashy as I have digressive damping), but the body now feels impressively tied down and the improvements in steering and response are more than worth the comfort trade off. Well recommended!
  10. The fitment doesn't actually look that aggressive tbh. It's just the overall footprint that looks chunkier when you look at the car head or rear-on, at a distance. With that offset there is basically a couple of mm clearance left either side of the wheel at the front (adjusted with camber plates), with 2mm between the wheel and the strut on the rear, and perhaps 3/4mm left on the outside of the tyre and the arch. It's worth noting that tyre widths do differ between brands, so you need to trial fit when you go this extreme. If you went MPSS for example, you'd have to go with a 245, as they run quite wide. Overall the extra grip is noticeable and worthwhile. 255/30/19 is also an almost perfect match to the stock diameter, so the speedo will read accurately. I'll try and get some pics later.
  11. 19x9 on a +45 offset will fit perfectly, but obviously depends on tyre size. I run that offset with a 255/30/19 tyre, but with front camber plates and it fits perfect. With stock camber, stick to a max 235 width.
  12. From my perspective, the main issues with the car, which I am slowly putting right, are a distinct mushiness and lack of feel to all the human-car interactions. The manual gear change feels mushy and long, the steering lacks immediacy and feel, and the chassis feels very soft, which is great for really bumpy roads, but does make the chassis feel very inert and slow to react (I’ve come from Evos and a GTR). The brake pedal equally is quite soft and mushy, and does not have the satisfying bite or directness of a decent Brembo or Alcon setup. With the general move to fitting Brembos to performance models, from VXR Astras, to Fords, I don’t know how VW can still give us these nasty bargain bin brakes on their flagship Golf. My car is is already a lot better with an APR quick shift and 42 Designs shift bushes. The shit is now much shorter and more direct, and has more feel. All in all much more satisfying to row through the gears. I’ve improved steering feel, steering directness and turn-in, and given the chassis much needed sharpness with coilovers and metal adjustable top mounts (increased camber). There’s now loads of feel through the steering, and the car feels much more alert and alive when changing direction, and with far less understeer. I’m also fitting H&R anti roll bars tomorrow, which should improve the turn-in, and eliminate any remaining body roll and understeer too, which I’m excited about. If I keep the car longer term, I hope to update the brakes at least on there front to larger discs and 6-pots, perhaps from the TT-RS or the RS3, which seem to be plug and play. The only other issue is the lack of sporty sound from the exhaust, and the hugely annoying Soundaktor, which I hope to rectify very soon, either through a new exhaust, or by removing the centre box and perhaps a sports cat.
  13. After my post about ‘mature’ exhausts, I’d love to hear a full Miltek or BCS resonated system on a Golf R, to see if they’ll fit the bill. Are the any owners in my area who wouldn’t mind giving me a spin in their car in exchange for a beer? I’m based near Aylesbury, but happy to drive to you. Lemme know. Thanks! Mart.
  14. This is the invidia system - about £600 plus shipping from the USA. As I said, a well respected brand among the Evo & Scoob lot. Even these guys have a large centre resonator: https://www.redline360.com/invidia-q300-golf-r-HS14GFRG3S
  15. Thanks. I did consider that, but assumed that it would introduce drone into the cabin, as surely that's why it's there? Even most decent aftermarket exhausts have centre resonators, which suggests it's necessary?
  16. I've had my R since November, and and slowly going through and making ‘improvements’ to the car, to get it just the way I like it. One of the biggest disappointments to me is the sound. It doesn't really sound very sporty, and although the engine loves to rev, the sound that comes from the car when you do so is very uninspiring. I've been wanting to get a new exhaust from day one, but reason that I’ve been reluctant is that being a basic 4 cylinder, I don’t just want to increase the volume of the current rubbish sound. I’d like to find an exhaust that emits a pleasing sound, without being overly loud, droney or 'laddish'. I realise that it’s never gonna sound like a V8, but I’m sure that if I buy wisely, I should be able to find a decent system that gives the car a better voice. I’ve been considering the system made by Invidia, as they are well regarding in the Scoob and Evo community, and are realistically priced. I’ve never seen the point of paying 1000s for what is simply a bit of piping and a few fibre glass stuffed baffles. Does anyone have experience of the Invidia system of the R, or can anyone recommend a system that will suit my needs? Also, what affect on the sound does a catted downpipes give? Does it simply add the turbo swoosh, or does in increase drone and boominess? All advice appreiocated. Mart.
  17. Quoted from the brochure (Google translation): "The optional R- "performance" titanium exhaust system does not only look good, it also sounds like that. The system, developed together with AkrapoviÄ, is highly temperature-resistant thanks to its titanium alloy and impresses with its unique sporty sound. The weight reduction by 7 kg compared to the standard equipment makes every motorsport heart beat higher."
  18. 0W30 is actually a better oil. A 0W oil will be thinner when cold, when most wear occurs, so will provide better protection for the engine. However the viscosity when the oil is up to temperature will remain the same at a 30 weight. Its always best to use a 0W oil for cold start protection.
  19. I agree - otherwise why would they design it like that in the first place?? There must be a design reason why the'd choose to taper-out the pipe, rather having it of equal dimension all the way through? It's not like there's an cost saving to designing it that way, it has to be like that for a reason?? All speculation - what do I know!
  20. He didn't mention centre bore, he quoted the offset of +45. Centre bore can be sorted with spigot rings, so not an issue tbh. +45 offset is optimal on the Mk7. It means the wheels are pushed further out that the stock wheels, which achieves a more 'flush' look.
  21. Do we know if the TT arms will fit? Aren't they longer than the MK7 ones? Won't they push the wheel further out? Am interested in replacing the nasty stamped steel ones with decent ally ones, so be interested to know!
  22. Sounds like either way you're paying well over the odds for the car in the current market conditions. I ordered mine in June and was able to achieve a 26% discount, as well as the same discount on optional extras. The depreciation on these due to high volume of cars available on the used market (too many lease deals) means that paying anywhere near full whack for one of these is utter madness. 2 year old cars are changing hands at around £20k, which is ridiculous. You're better off buying a nearly new car with say 2k miles on and pocket the £7k change. You can buy used cars on PCP these days too, so no real incentive to buy new unless there's a big discount! Hope that helps.
  23. The ideal offset for the Mk7 Golf is +45, on a 8.5" width wheel. You can easily get a 235/30/19 tyre on there, and can go up to a 255/30/19, depending on the tyre brand (some come wider than others). There are literally hundreds of design available in this size, so you just need to decide on the style you prefer.
×
×
  • Create New...