Jump to content

ASRman

Members
  • Posts

    203
  • Joined

  • Last visited

Everything posted by ASRman

  1. That's the PCV breather hose mate you'll have to order a new one isn't much £50 odd.
  2. Nice car but I can guarantee you that piggy box is not getting you anywhere near close to 400hp.
  3. Pretty strong statement to say "avoid racingline at all costs". I'm also pretty sure these things are completely pointless on a stock R. They only really become a necessity on Stage 3 cars which are driven very hard on track. On a stock car that isn't tracked to be honest I wouldn't be expecting to see anything in the can anyway so I'm not surprised by that. The oil blowby in the intake is something I have noticed everytime I take a look down there and provided it's not excessive it's totally normal. Mines had some oil blowby in the PCV/intake since start of ownership and has not caused any problems. If you want to get the most out of the catch can kit you need to take the car to stage 2/3 and start tracking it. You'll quickly see that can fill up nicely. I have a bunch of friends who run the can on their stage 3 Rs and it works perfectly. Very strange mod to be installing on a stock car I must say.
  4. Hi thanks for your reply buddy. No matrix headlights just standard xenon LED. I think you may be correct it may be a connector pin not making good contact. I think the water ingress which developed on the previous headlight may have potentially damaged the connector on the main loom. I will take it into specialist to have a look at closely
  5. Hi guys thanks for replies it's 7.5 @gregozedobe no the high beam does not illuminate at all on the left side. Main beam and LEDs work perfectly fine however. Strange as it's the same bulb so can't be that. Is there a seperate control module for the high beam only?
  6. Yeh I am starting to think it needs coding. Apparently it doesn't but it's strange that all the lights work now except for just the high beam on that side. There is no seperate bulb either for the high beam but the main beam works just fine. Anyone know if anything can be done coding wise via obdeleven ?
  7. Fair enough but in my case the high beam actually is not working !
  8. Hi all, Recently replaced my passenger side headlight after developing substantial water ingress after discovering a small crack in the lens. This previously led to the main beam, high beam and cornering lights all going out . Installed the replacement headlight unit today (identical part number) which included the headlight unit, bulbs and all control modules. This was a used headlight bought off eBay and from a 2017 car (exactly same as mine) . Good news is that the main beam works now, as well as the cornering lights and LEDs. However the high beam is still out on that left side. Quick scan on obdeleven shows an intermittent fault code stating 'supply for high beam'. The seller on eBay has assured me this headlight worked perfectly on his car but is happy to refund me if need be but I really don't want the hassle of returning it if it is a simple fix as otherwise the headlight was purchased for a great price and otherwise appears to be in perfect condition. What are the possible causes for this? I am thinking potentially faulty control module? TIA.
  9. Really crappy booster might contain lead which will not be good obviously but the better quality ones use MMT (manganese) to boost octane number. Apart from the fact it makes the plugs look funny I haven't heard of it causing any lasting damage.
  10. Agreed. Although I still think the failures are more down to crappy software rather than the box design itself, or perhaps the mechatronics unit. I recall my original box always playing up, skipping gears, not responding to paddle inputs, regularly getting confused on kick down, not changing up gear when clicking the paddle in S mode to activate manual. The new box has been pretty rock solid for the most part. Done 30k hard miles on it now and hasnt missed a beat. Even better now with TVS software.
  11. I have tried NF Race Formula in the past but when I checked the plugs they were baked in an orange rust type substance which I now know is caused by the booster. Apparently doesn't do any harm but wasn't keen on how they looked so stopped using it
  12. What is it with gearbox replacements on the 7.5 and FL S3 at this low mileage! Mine went at identical mileage and have now heard of quite a few other DQ381s going bad on S3s at around that mileage! That said since replacement it's been fine. Now on 40k mileage. Strange though
  13. APR Stage 2 V2.6 High Output I did ask Niek and he said it should be fine with no issues running APR tune but he did say it would be even better with TVS ECU software aswell
  14. No boost on launch is only available on Stage 3 and above I probably could have gotten away with Stage 2+ but I wanted the full TVS works and opted for Stage 3 😎
  15. TVS Stage 3 DSG Software is officially installed onto my car. 700nm torque limit together with the following options (not exhaustive): 1. Optimised shift points in D S and M 2. Improved clutch cooling and thermomanagement 3. Increased clamping pressure for the clutches 18-19 bar 4. Improved shift speeds in D S and M 5. Torque limiters raised (700nm) 6. Full manual mode, no autoupshift, no kickdown etc. 7. Race Mode without torque reduction 8. Boost on Launch Mode (yes it sounds like a rally car!) And quite a few other perks...Needless to say, I am so impressed with how the car drives now. Prior to the TVS I genuinely never touched S mode and rarely bothered with D mode due to the poor shifting strategy. Now I just drove 50 miles to work in S mode the entire time! It works fantastically and based on precise throttle inputs meaning it will chill out and upshift if you're taking it easy but the moment you're on it will hold onto gears longer as required. It appears my DSG was definitely limiting torque previously in higher gears as the way the car pulls now up until redline is relentless. Its not placebo either as I have recorded the times on dragy and yes they seem to be on average almost half a second quicker than previously! I will test it more to confirm this but so far I would say the TVS is worth every penny and more. STA Aylesbury are brilliant, very professional and keep you informed throughout the entire process. Would definitely recommend them for anyone considering a DSG TVS map or anything mechanically DSG related STA will be able to sort it, it's quite clear why TVS have appointed them as UK Dealers they are top draw. The process took around 4 hours from start to finish as it involved downloading the file off my car sending that over to Holland and then re-flashing and adjusting which is back and forth process to an extent and then final download of the finished product onto my car followed by test drives and logs. Really impressed with both STA and TVS Holland as to how efficient the remote mapping solution has become. Any questions feel free to shout but yes, to say I am massively impressed is an understatement, the car really needs to be driven and compared back to back with the stock software to realise just how good it is. I now know why they call TVS the DSG Wizards of the MQB world!
  16. Yep exactly same mods! Don't understand why APR and Revo say the stock TCU on DQ381 is fine for stage 2 because it really isn't. Have a few friends with Facelift S3s/7.5Rs and a couple have experienced slip especially during launch with Stage 2 high torque software. Will post up my review of Stage 3 TVS after Tuesday once it's done I'm told by many it will transform the car so here's to hoping!
  17. I'm running APR Stage 2 high torque v2.6 on my facelift car with Wagner and catless scorpion full catback system so running over 450 ft lbs, they initially thought stage 2+ would be enough up to 600nm but I spoke to TVS directly who said I'll need stage 3 TVS to cater for my torque level. Stage 2+ was £550 plus VAT and stage 3 is 975 plus VAT. Stage 3 TVS DSG software is good for up to 700 nm on stock clutch on the dq381 so I'm expecting really good results from the software!
  18. I believe you're referring to STA Gearbox Aylesbury. I'm having my DSG 7 speed tuned by them with TVS software next Tuesday Have also been in contact with TVS directly who have assured me they will be available on the day remotely of course to assist with file modification and tweaks. Couldn't be arsed waiting around for APR and Revo, by the time they release their DSG software I will have long since sold the car!
  19. I had a custom resonator delete installed onto my car which, as you describe, sounded like a bag of nails. I did however enjoy the increased sound and extra pops and bangs so rather than re-install the stock resonator I decided to rip the custom 2.5" pipe out and replace it with the BCS 3" Anti Drone version. It was a bit of a gamble as I did not know what to expect but was glad I went for it as it sounded fantastic and much better than the previous pipe. Think the pipe diameter potentially had more to do with the sound than the anti drone section but it definitely sounded much deeper with a higher quality tone than the previous custom job I had done. All sold now as gone for a full cat back system. BCS version is quite pricey and a lot of people are quick to opt for cheaper offerings on the market but I would much rather spend an extra couple of hundred quid and get it right the first time, it's a nice car it deserves nice parts
  20. Anyone know the difference (if any) between the latest revision turbo on the last of the 7R vs the latest revision being used in the 7.5R and Facelift S3? Also interesting to know if any reported failures on 7.5 R turbo yet either standard or tuned
  21. Normally I would blast a post like this but you've given your advice in a constructive helpful way and you do actually sound like my dad who I try my best not to argue with 😅 You're right traction fully off in the conditions last night together with the state of my tires (they are still totally legally just towards end of their useful life) was probably not the best idea should be taking it easy. Thanks dude 👍
  22. Yep traction switched off fully as it always is. I'm not 100% sure the rears were spinning but I would imagine they were, running APR Stage 2 High Torque map (430 ft lbs) with crappy tires on greasy roads so I don't think it's that unusual to have some slip in these circumstances?
  23. Greasy roads today, and I'm in dire need of a tire change (new set coming next week). Gave it the beans on a small quiet stretch today in gear 2 and the car spun and revs rose too quick for me to catch it (was in DSG manual mode), almost felt like it over rev'd and then seemed to jump straight into 4th and bog right down. I'm guessing it auto shifted into 3rd before I had time to click the paddle, and once the paddle was clicked (now in 3rd) that's when it went into 4th. All happened so quickly mind was hard to decipher exactly what had just happened. Had the Haldex serviced recently it's not that, combination of high torque stage 2 and knackered tires mean I get some wheel spin in non ideal conditions. Anyone else experienced anything like this?
×
×
  • Create New...