Jump to content

Wheel Thread!


ASH-VDS

Recommended Posts

don't

 

don't forge centre bore of 57.1mm (unless you use spigot rings)

 

He didn't mention centre bore, he quoted the offset of +45.  Centre bore can be sorted with spigot rings, so not an issue tbh.

 

+45 offset is optimal on the Mk7.  It means the wheels are pushed further out that the stock wheels, which achieves a more 'flush' look.  

Link to comment
Share on other sites

He didn't mention centre bore, he quoted the offset of +45.  Centre bore can be sorted with spigot rings, so not an issue tbh.

 

+45 offset is optimal on the Mk7.  It means the wheels are pushed further out that the stock wheels, which achieves a more 'flush' look.  

yes I know but some people prefer to have perfect fit so you don't have to mess about with spigot rings . At the end of the day if you can get the wheel you want in 57.1mm centre bore you would not get a 65m centre bore and use a spigot ring

Link to comment
Share on other sites

I'm assuming the ideal ET for 19's is ET45.  Not being too clued up on offsets does that mean any alloy 19x8.5 5x112 and runnint an ET45 offset is spot on?

8.5" wide and 45 seems to be the optimum width front and back.

8" and I'd say about 41 or 42mm, or better still 42 front and 38 rear give or take a mm or two.

Link to comment
Share on other sites

Cheers mate, is there any issues with spigot rings or spacers if your planning on track days?

Spigot rings aren't load bearing as such, they just centre the wheel on the hub. So long as the bolts are correctly torqued and the correct fitment is used they'll be fine on track. Although they look like cheap bits of plastic they must be made of something that doesn't melt. BBS use metal spigot rings which are bound to be better.

 

Spacers throw up a few question marks. So long as they're high quality, the bolts are correctly torqued and you don't bounce off the kerbs they should in theory be ok. If you're ultra competitive and have a fondness for the kerbs I think they'd best be removed and kept for road use only!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...