ASH-VDS Posted February 15, 2017 Author Report Share Posted February 15, 2017 Must be more people with aftermarket wheels on here!? Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
dazie00 Posted February 20, 2017 Report Share Posted February 20, 2017 Must be more people with aftermarket wheels on here!? Sent from my iPhone using Tapatalk Hmmm , you would have thought so , i keep looking but can't quite make my mind up !! Quote Link to comment Share on other sites More sharing options...
Exonian Posted February 21, 2017 Report Share Posted February 21, 2017 These have been posted on the forum numerous times but here goes again: VW Motorsport 19" in varying seasons and states of cleanliness And my GTI wearing Rondell 19" wheels just because I really like the look of them/it TomGolfRmk7 and Stobsie 2 Quote Link to comment Share on other sites More sharing options...
Marty77 Posted February 24, 2017 Report Share Posted February 24, 2017 I'm assuming the ideal ET for 19's is ET45. Not being too clued up on offsets does that mean any alloy 19x8.5 5x112 and runnint an ET45 offset is spot on? Exonian 1 Quote Link to comment Share on other sites More sharing options...
minesaturbo Posted February 24, 2017 Report Share Posted February 24, 2017 don't I'm assuming the ideal ET for 19's is ET45. Not being too clued up on offsets does that mean any alloy 19x8.5 5x112 and runnint an ET45 offset is spot on? don't forge centre bore of 57.1mm (unless you use spigot rings) Quote Link to comment Share on other sites More sharing options...
Captain Caveman Posted February 24, 2017 Report Share Posted February 24, 2017 don't don't forge centre bore of 57.1mm (unless you use spigot rings) He didn't mention centre bore, he quoted the offset of +45. Centre bore can be sorted with spigot rings, so not an issue tbh. +45 offset is optimal on the Mk7. It means the wheels are pushed further out that the stock wheels, which achieves a more 'flush' look. Marty77 1 Quote Link to comment Share on other sites More sharing options...
Marty77 Posted February 24, 2017 Report Share Posted February 24, 2017 Cheers guys will keep an eye out for both. Quote Link to comment Share on other sites More sharing options...
minesaturbo Posted February 24, 2017 Report Share Posted February 24, 2017 He didn't mention centre bore, he quoted the offset of +45. Centre bore can be sorted with spigot rings, so not an issue tbh. +45 offset is optimal on the Mk7. It means the wheels are pushed further out that the stock wheels, which achieves a more 'flush' look. yes I know but some people prefer to have perfect fit so you don't have to mess about with spigot rings . At the end of the day if you can get the wheel you want in 57.1mm centre bore you would not get a 65m centre bore and use a spigot ring Quote Link to comment Share on other sites More sharing options...
simonj67 Posted February 24, 2017 Report Share Posted February 24, 2017 Mine with 19" Neuspeed RSE 10's.. Same wheels on my old GTD... Trickz and TomGolfRmk7 2 Quote Link to comment Share on other sites More sharing options...
simmy Posted February 25, 2017 Report Share Posted February 25, 2017 Mine with 19" Neuspeed RSE 10's.. Same wheels on my old GTD... Hi Is the estate on standard suspension Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
simonj67 Posted February 25, 2017 Report Share Posted February 25, 2017 Yes simmy, standard suspension. simmy 1 Quote Link to comment Share on other sites More sharing options...
simmy Posted February 26, 2017 Report Share Posted February 26, 2017 Yes simmy, standard suspension. Thanks, looking at 19s and was thinking vwr springs as well,but maybe I'll leave the springs. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Exonian Posted February 26, 2017 Report Share Posted February 26, 2017 I'm assuming the ideal ET for 19's is ET45. Not being too clued up on offsets does that mean any alloy 19x8.5 5x112 and runnint an ET45 offset is spot on? 8.5" wide and 45 seems to be the optimum width front and back. 8" and I'd say about 41 or 42mm, or better still 42 front and 38 rear give or take a mm or two. Marty77 1 Quote Link to comment Share on other sites More sharing options...
Marty77 Posted February 26, 2017 Report Share Posted February 26, 2017 Cheers mate, is there any issues with spigot rings or spacers if your planning on track days? Quote Link to comment Share on other sites More sharing options...
Exonian Posted February 26, 2017 Report Share Posted February 26, 2017 Cheers mate, is there any issues with spigot rings or spacers if your planning on track days? Spigot rings aren't load bearing as such, they just centre the wheel on the hub. So long as the bolts are correctly torqued and the correct fitment is used they'll be fine on track. Although they look like cheap bits of plastic they must be made of something that doesn't melt. BBS use metal spigot rings which are bound to be better. Spacers throw up a few question marks. So long as they're high quality, the bolts are correctly torqued and you don't bounce off the kerbs they should in theory be ok. If you're ultra competitive and have a fondness for the kerbs I think they'd best be removed and kept for road use only! Marty77 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.