Jump to content

Touchless dry


Boj27

Recommended Posts

Has anyone purchased an electric drier for a touchless dry? I always find my drying microfibres get full too quickly, even with the big ones. Been thinking of getting an electric drier instead - they're around £100 for an entry level one, anyone had any experience? Also spending £400 on a cquartz detail has got me thinking maybe drying the car with towels could be a bit risky given that the slightest grain of dirt of grit missed would be pulled along the car panels if missed when drying. Thoughts?

Link to comment
Share on other sites

I have a Metrovac Vac n Blo.  http://www.cleanyourcar.co.uk/index.php?_a=viewProd&productId=1090. My initial review here.  http://www.vwroc.com/forums/topic/11967-metrovac-vac-n-blo-review/?hl=%2Bmetrovac+%2Breview. Its a great piece of kit both the dryer and the vacuum function.  The blower is powerful and enough to shift the majority of standing water from the car and then just dab the last bits with a drying towel.  Like dean5i, I have a Raceglaze Filter but my preference is to still dry off the car rather than leave it wet.  Have to be a bit careful with water filters when the resin is nearing its end and needs replacement as the main sign of this is water spotting so not always foolproof. 

 

I traded up from a Metrovac Sidekick http://www.cleanyourcar.co.uk/washing-and-drying/metro-vac-sidekick-blaster/prod_1152.html. which is another great bit of kit but more suited to smaller panels and water trap areas rather than the whole car. 

Link to comment
Share on other sites

I have a Metrovac Vac n Blo.  http://www.cleanyourcar.co.uk/index.php?_a=viewProd&productId=1090. My initial review here.  http://www.vwroc.com/forums/topic/11967-metrovac-vac-n-blo-review/?hl=%2Bmetrovac+%2Breview. Its a great piece of kit both the dryer and the vacuum function.  The blower is powerful and enough to shift the majority of standing water from the car and then just dab the last bits with a drying towel.  Like dean5i, I have a Raceglaze Filter but my preference is to still dry off the car rather than leave it wet.  Have to be a bit careful with water filters when the resin is nearing its end and needs replacement as the main sign of this is water spotting so not always foolproof. 

 

As this topic os on drying it's the perfect place to ask. Do you using a clean drying towel on a clean car in a hard water area scratch the car?

 

My resin is firmly over in my water filter so I used the Metrovac Vac n Blo to get the majority off then went round wiping up the leftovers, the car was in the sun and I noticed that on one area I wiped it dry and inflicted swirls. Was very disappointed as my wash & dry routine was getting better and better and I'm at the stage now where each wash is relatively painless in terms of swirling.

Link to comment
Share on other sites

As this topic os on drying it's the perfect place to ask. Do you using a clean drying towel on a clean car in a hard water area scratch the car?

 

My resin is firmly over in my water filter so I used the Metrovac Vac n Blo to get the majority off then went round wiping up the leftovers, the car was in the sun and I noticed that on one area I wiped it dry and inflicted swirls. Was very disappointed as my wash & dry routine was getting better and better and I'm at the stage now where each wash is relatively painless in terms of swirling.

 

I think it rather depends on the drying technique used and condition of towel.  Hard to answer really as can only speak for myself, but unless something has got into the towel (which can happen), grit etc, then no, then IME towel does not generally scratch the car.  I keep my towels in dust free lidded plastic containers so the chances of them picking up dust is kept to a minimum and they stay in the box until time to dry the car, and are brought out one at a time.  I also use multiple towels (3-4 small WoWo ones on bodywork, 2 WoWo wheel towels on wheels), rather than one big towel for the whole car.  Also, I only blot the remaining water on the car, rather than wiping off.  After the final open ended hose rinse there is not a great deal of water left standing and if using the vac n blo (don't always use it), then even less remaining water, so on horizontal panels (roof, bonnet) I gently lay the towel on the flat panel and allow it to absorb what water is left then lift and flick it upwards and away and clear of the panel. On vertical panels I hold it against panel to absorb water and lift away.  

 

To clarify - for instance, a video was posted up a few days ago in this thread http://www.vwroc.com/forums/topic/18872-cleaning-a-clubsport-s-video/. Now not knocking the vid or anything for the most part looks good wash, but I don't do what this guy does with his drying towels - he lays it on the roof to absorb the water then drags it off the panel.  IMO there's great scope to inflict swirls/marks using that blot and drag technique. After laying the towel on the roof and letting it suck up the water, I take the two nearest edges and quickly lift and floor cl the whole towel upwards so it's clear of the roof then pull it away whilst in mid air, so no dragging along the paintwork.  Sounds a bit weird but a quick flick of the wrists can save your paintwork.  And the aforementioned smaller towels facilitate this flicking up action. 

 

That said, any touch stage of detailing has the potential to inflict swirls, be it the wash mitt or drying towel or applying and buffing off sealant or wax, so over the course of a number of months/year of regular cleaning, swirls may result and are much more visible on dark, especially black cars. It's all about minimising the risk at the touch stages. 

Link to comment
Share on other sites

I think it rather depends on the drying technique used and condition of towel.  Hard to answer really as can only speak for myself, but unless something has got into the towel (which can happen), grit etc, then no, then IME towel does not generally scratch the car.  I keep my towels in dust free lidded plastic containers so the chances of them picking up dust is kept to a minimum and they stay in the box until time to dry the car, and are brought out one at a time.  I also use multiple towels (3-4 small WoWo ones on bodywork, 2 WoWo wheel towels on wheels), rather than one big towel for the whole car.  Also, I only blot the remaining water on the car, rather than wiping off.  After the final open ended hose rinse there is not a great deal of water left standing and if using the vac n blo (don't always use it), then even less remaining water, so on horizontal panels (roof, bonnet) I gently lay the towel on the flat panel and allow it to absorb what water is left then lift and flick it upwards and away and clear of the panel. On vertical panels I hold it against panel to absorb water and lift away.  

 

To clarify - for instance, a video was posted up a few days ago in this thread http://www.vwroc.com/forums/topic/18872-cleaning-a-clubsport-s-video/. Now not knocking the vid or anything for the most part looks good wash, but I don't do what this guy does with his drying towels - he lays it on the roof to absorb the water then drags it off the panel.  IMO there's great scope to inflict swirls/marks using that blot and drag technique. After laying the towel on the roof and letting it suck up the water, I take the two nearest edges and quickly lift and flick the whole towel upwards so it's clear of the roof then pull it away whilst in mid air, so no dragging along the paintwork.  Sounds a bit weird but a quick flick of the wrists can save your paintwork.  And the aforementioned smaller towels facilitate this flicking up action. 

 

I think I'm going to have to re-do the wash and video what happened and get some opinions. My towels are kept stored the same as yours, the car was clean, towel came out the box onto the car - scratched. 

 

I've seen the video and tried both methods but it's just this time it was like the drying towel damaged the paint.

Link to comment
Share on other sites

I think I'm going to have to re-do the wash and video what happened and get some opinions. My towels are kept stored the same as yours, the car was clean, towel came out the box onto the car - scratched. 

 

I've seen the video and tried both methods but it's just this time it was like the drying towel damaged the paint.

 

How bad are the scratches, and which method did you use on that occasion?  What condition is the towel in - have the fibres hardened which can happen over time.

Link to comment
Share on other sites

How bad are the scratches, and which method did you use on that occasion?  What condition is the towel in - have the fibres hardened which can happen over time.

 

You can see how well I'm doing swirl wise in this photo but if you look just below the door handle and left a bit you will see them. Could almost be mistaken for clouds or smudges. Wen you move your head and the light is in a different place they disappear just the same as most swirls/holograms do. 

 

On this occasion I had the towel folded up and was gently wiping across the surface of the panel. 

 

ALP_9404.jpg

 

And zoomed

 

ALP_9404_2.jpg

 

The towel is a Gtechniq drying towel, it's about 5 months old, washed properly and nice and soft. 

Link to comment
Share on other sites

You can see how well I'm doing swirl wise in this photo but if you look just below the door handle and left a bit you will see them. Could almost be mistaken for clouds or smudges. Wen you move your head and the light is in a different place they disappear just the same as most swirls/holograms do.

 

On this occasion I had the towel folded up and was gently wiping across the surface of the panel.

 

And zoomed

 

ALP_9404_2.jpg

 

The towel is a Gtechniq drying towel, it's about 5 months old, washed properly and nice and soft.

Yeah I see them. Unfortunately it does happen, must have been something either on surface of the paintwork, on towel or possibly in the residual water which has marked the surface as the towel has been wiped across. Dabbing rather than wiping can minimise the risk. And there's a possibility it could have been done at wash mitt stage and not seen until the sun hit the panel. It's a pain and I know you want to do all you can to eliminate all swirls but sometimes you can't, and they occur despite all your careful efforts, but they will easily polish out.

 

We would all love guaranteed swirl free detailing but being realistic, it's a fact of detailing life that somewhere along the line swirls will be present, no matter how many precautions you take. Otherwise non of us in here would own DA's or get pro details every now and then. Do what you can do reduce the risk as you are trying to, but don't get too disheartened if you do get a few swirls.

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

so now i have to spend another 200-330 quid on a blower and a filter??! aaaaargh!

 

im not sure about the filter, i live in yorkshire where the water is pretty damn soft, what you guys think?

It depends. Do you get water spots if the rinse water dries on the car? If so, I would buy a DI water filter over a car dryer any day of the week. If not, go for the dryer.

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Yeah I see them. Unfortunately it does happen, must have been something either on surface of the paintwork, on towel or possibly in the residual water which has marked the surface as the towel has been wiped across. Dabbing rather than wiping can minimise the risk. And there's a possibility it could have been done at wash mitt stage and not seen until the sun hit the panel. It's a pain and I know you want to do all you can to eliminate all swirls but sometimes you can't, and they occur despite all your careful efforts, but they will easily polish out.

 

We would all love guaranteed swirl free detailing but being realistic, it's a fact of detailing life that somewhere along the line swirls will be present, no matter how many precautions you take. Otherwise non of us in here would own DA's or get pro details every now and then. Do what you can do reduce the risk as you are trying to, but don't get too disheartened if you do get a few swirls.

 

 

Sent from my iPad using Tapatalk

 

As I was wiping the panel I could literally see the swirls appearing before my eyes as the water was removed thats why I thought could it be hard water causing the marks?

 

It was probably dirt left behind, dirt in the towel or pressing too hard. Will have to replace the resin in my DI vessel before my big spring detail.  :afro:

Link to comment
Share on other sites

It depends. Do you get water spots if the rinse water dries on the car? If so, I would buy a DI water filter over a car dryer any day of the week. If not, go for the dryer.

Sent from my iPad using Tapatalk

I'd have to check really. I try not to let the water dry at all before to try minimise. I'll report back!

Link to comment
Share on other sites

As I was wiping the panel I could literally see the swirls appearing before my eyes as the water was removed thats why I thought could it be hard water causing the marks?

 

It was probably dirt left behind, dirt in the towel or pressing too hard. Will have to replace the resin in my DI vessel before my big spring detail. :afro:

Get your resin changed, at least that will remove one possible culprit from the equation.

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Get a "pet" dryer, half the price of anything sold as for drying cars if you're after something like that - google or ebay.

If it's towels, go to Costco. Pack of 50-ish microfiber towels for under £10, use them once from the top down, door checks then wheels - then chuck it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...