Nathan3cx Posted January 3, 2021 Report Share Posted January 3, 2021 Hi, My rear reverse camera and boot opening latch have stopped working? I get parking sensors coming on and colour emblems on right of screen in dash. Ive checked fuse, reset head unit, scanned it with vcds no faults, checked wiring and plugs going into camera all look good?? Any ideas ? Would it be best just to replace camera and boot latch ? Thanks in advance? Quote Link to comment Share on other sites More sharing options...
slider09 Posted January 3, 2021 Report Share Posted January 3, 2021 Factory or retro fit?Any coding been done prior to it not working?Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
theskivingscholar Posted January 3, 2021 Report Share Posted January 3, 2021 Checked it's definitely knackered? Ask someone to see if the badge is flipping up to expose her camera.Try manually opening and closing the boot a few times, sometimes the badge latch that hides the camera gets stuck. Happened to me once, some road gunge had sort of caked it shut.When this happens it doesn't pop out and the screen looks black with a slight film grain. Nathan3cx 1 Quote Link to comment Share on other sites More sharing options...
Nathan3cx Posted January 3, 2021 Author Report Share Posted January 3, 2021 1 hour ago, theskivingscholar said: Checked it's definitely knackered? Ask someone to see if the badge is flipping up to expose her camera. Try manually opening and closing the boot a few times, sometimes the badge latch that hides the camera gets stuck. Happened to me once, some road gunge had sort of caked it shut. When this happens it doesn't pop out and the screen looks black with a slight Badge is not flipping up to expose camera, boot doesn't open when you try it manually, only opens when u use key fob?? Quote Link to comment Share on other sites More sharing options...
Ignition1 Posted January 5, 2021 Report Share Posted January 5, 2021 Sounds like the latch needs replacing. My reversing camera has been temperamental at times - e.g. only sensors turn on, not the camera. Usually taking it out and back into reverse sorts it, or turning the car on and off. Nathan3cx 1 Quote Link to comment Share on other sites More sharing options...
Nathan3cx Posted January 5, 2021 Author Report Share Posted January 5, 2021 On 03/01/2021 at 20:51, slider09 said: Factory or retro fit? Any coding been done prior to it not working? Sent from my iPhone using Tapatalk Its seems to be factory been fitted to car for year's. Quote Link to comment Share on other sites More sharing options...
alexretro Posted January 10, 2021 Report Share Posted January 10, 2021 Looks like your camera mechanism is faulty. Unfortunately it will be replacement the whole thing. You can buy it second hand in ebay Quote Link to comment Share on other sites More sharing options...
aRsene Posted January 10, 2021 Report Share Posted January 10, 2021 Spray all mechanisms with WD40 first. It’s the time of year when things tend to stick. Quote Link to comment Share on other sites More sharing options...
stonefish Posted January 10, 2021 Report Share Posted January 10, 2021 If the handle and the camera don't work then that would suggest a power issue and hopefully the camera is OK. Personally, I would check the power at the camera in the tailgate (red/yellow wire on the camera). I have heard of some rare cases of the wiring breaking at the point where the loom leaves the tailgate and enters the car. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.