Jump to content

Moe

Members
  • Posts

    168
  • Joined

  • Last visited

Everything posted by Moe

  1. Hey man - missed this somehow, sorry for massive delay. How are you getting on? Mine does something very similar - though it is hard to judge based on RPM cos it is actually spraying on fueling, so a combination of RPM, engine load, speed, etc etc. But mine does something similar - gives a quick spray up front at lower RPM / throttle, and then starts again and gradually builds up. I think this is because one of the injector banks fires early and gives a squirt of fuel, and then the other takes over and builds gradually. I'm now having another weird issue though that I need to speak to Richard about - my failsafes have started kicking in during high gear acceleration, but ONLY when the AC is on?! took me a while to pin it down, but it is definitely linked to the AC, which makes me think that maybe the pump isn't getting enough power and the resultant change in flow is triggering the flow sensor failsafe. Very weird - hopefully something we can solve soon! Otherwise I 'm gonna just ramp up the failsafe delay, as it's really annoying having to restart the car every time this happens to get full power back.
  2. They sell the screens separately and they're pretty cheap if I recall correctly - it's just a basic LCD display Drop them a note, might not cost that much to just change the whole screen.
  3. Hey Justin - I've just been tweaking and tweaking through trial and error, and I'm pretty happy with how it's dialed in now. What are the issues you're having? The P/I-R trim is for bias between direct and indirect injector banks on our cars - assuming you bought the right version for our cars. Basically, every other car uses the same universal / generic kit, but ours is unique. So as long as you bought the version specifically for our cars then P/I-R is for the 2 sets of injectors, not for boost/fuel. The systems for our card actually don't reference boost at all for spraying. You'll notice that the factory jumper positions are different from the manual, and not aligned with the gold dots on the circuit board - this ios because aquamist set it up from the factory for our cars. The normal default is IDC, whereas ours is P+I. From speaking to Richard@Aquamist, he advised leaving the P-I/R trim set at 1 o'clock. It's worked well for me so far, and I've mostly been tweaking the gain and threshold settings. This is how mine is currently set.
  4. Cheers buddy, will do - for now I've gone with Richard@Aquamist's starting advice and set the trimmer to 1 o'clock, which is a slight bias to the direct injector duty cycle rather than indirect. Have been playing around with the rest and set the threshold and gain based on trial and error. Am definitely feeling the effects but managed to batter through 250ml of 50:50 in a 20 minute play around some empty streets - so am thinking about turning it down to slightly less gain and a higher threshold. Either way, the car is definitely driving nicely and pulling hard, inlet air temperature is dropping way below ambient on a hard pull (which has never happened before given I live in the middle east where it's hot as hell!) so i'm definitely in a good place until I can get some proper logging and finetuning done. Anyway, thanks a lot for your input and will definitely report back here as and when I find more info or get some logging done to see what's what!
  5. I do indeed have vagcom and that's definitely what i'm gonna do. either open road or dyno - but definitely some logging and finetuning to be done. we always log pre/post map updates, but have never actually looked at IDC before - not even sure if vcds will pick up the 2 sets of injectors separately though, or if it will just show one value for IDC! will have a play around and see what's what. Just waiting for my tuner to come back from holidays - not easy (or safe!) logging while driving yourself!!
  6. Am using two nozzles: a 0.9mm/M5.3 and a 1mm/M6. I'm terrible at the calculations, but it should be around 1000cc/min at max flow. The aquamist system doesn't have a start and stop point as such - there's a threshold for triggering the system (currently set at around 35-40% IDC) and then a 'gain' trimmer which determines whether the flow increases in a linear / 1:1 pattern up until 95% IDC, or at a steeper ratio - which would reach max flow earlier. The thing I'm trying to get my head around is because our cars have 2 sets of fuel injectors - direct and indirect - you can trim the system to read IDC from either one set, the other set, both equally, or any balance in between. I'm trying to figure out when our cars use one set vs the other, so I can trim accordingly - ie are they using both during ramp up and then direct injection only on WOT, etc. This would help me balance the threshold and trimming to spray when the car needs it most, as I'm using the system to supplement fueling due to poor quality fuel out here.
  7. Thanks for the reply - however the Aquamist system is quite different from other systems so I was hoping somebody here had some knowledge on this kit specifically. It sprays based on injector duty cycle (fueling) and not boost, and you can choose the bias between spraying on the IDC of the direct injectors and the indirect injectors on our multiport injection cars. Have been playing around with it a lot and it's mostly just trial and error, so would be keen to hear from others what they've done as a starting point.
  8. Thanks a lot! Couple of follow-up questions, seeing as how I'm guessing you've done this: - Do any of the drain plugs for the transfer box / diff / haldex need replacing when changing fluid (like the engine oil and DSG fluid plugs) or are they fine to reuse? - How long does it take to remove the Haldex pump and clean the filter?
  9. Hey all, So I'm planning a bunch of maintenance, including oil change, DSG fluid / filter change, Haldex fluid change and differential filter change. I have been scouring the net and have a couple of questions / confirmations that I was hoping the good folk here could help with: - Am I right in thinking there is no front differential that needs separate fluid? Ie this is handled by the DSG, and changing the DSG fluid and filter is all the maintenance needed? Or is there a bevel box / transfer case / something additional at the front that needs fluid change? - I understand there is no filter on the Gen V Haldex - is this correct? So just a fluid change is needed? - I plan to use Motul Gear LS 300 for the rear diff (and the front diff / angle box / bevel box / transfer case if such a thing exists), however am I right in thinking this is not suitable for the Haldex coupling? I can only find OEM fluid for the Haldex coupling - are there any aftermarket / higher quality options for Haldex fluid? Thanks in advance!
  10. If you're at all worried about drone from res delete, check out the BCS res delete pipe. It has a helmholtz resonator on it to kill drone. Pricey, but BCS quality is excellent. Incidentally, of all the exhaust systems I've heard for the 7R, the ones which drone have straight through midpipes - so it does seem that centre box is killing drone. I may be sensitive to it, but have sat in a few cars running nothing but a downpipe and res delete, and they definitely do drone.
  11. Haha I hear this all the time - it's the oil they export, not the fuel! Fuel quality here is poor and inconsistent - bad batches happen quite often, and it's a monopoly so you only have one choice of station / brand.
  12. So my car is a MY15 delivered in August '14 - is there any way of knowing which revision coilpacks I have? Am having a bunch of stuff installed soon, if there's a more recent/improved OEM part I will throw them on at the same time..
  13. Hey all, So I have an Aquamist HFS-4 system in the build queue right now, and will be installing in the next month or so. I live in the UAE where there is limited availability of knowledgeable shops to help with this kinda stuff, so wanted some guidance on config/setup. Installation will be fine - the shop doing the install is excellent and I trust them to do a good job on installation/wiring - but they specialise in JDM cars, so I don't think they'd know how to set it up right for a VAG car. Looking for some info on nozzle sizes, when to spray, failsafe calibration, and anything else that might be relevant. Some info on the car / setup / usage: - Car is a daily driver, so definitely not needing to push it to the max - Car hasn't been dyno'd in current form, but is probably ~450BHP - I run a Turbo Technics hybrid and MRC software, but low boost (1.95bar) - I'd rather not run a high meth ratio - I don't want to run the WMI system all the time, and I won't be tuning for meth / increasing boost - just want to compensate for ridiculous ambient temperature and shitty fuel quality I've heard the default setup means the car cuts boost to 1bar when the system is switched off as a failsafe, which obviously won't work for me - but want to know how to change that, or if there's an alternative failsafe setting / setup that is advisable. Appreciate any help from those who know the system well and have played around with different settings. Thanks! (PFA)
  14. I know of 3 people's cars who were a litre short of DSG fluid, all here in the UAE. Referring to these 3 specific cases (which they were able to look up and verify), they eventually agreed to check my DSG oil level and if it was low then they would cover the cost, but if it was ok then I'd have to pay the labour for checking. Mine wasn't low, but thankfully labour is cheap here (equivalent of 50 quid for checking DSG oil level). Ended up doing a full service and replacing with Motul DCTF a few months later anyway.
  15. Haha they should detune the muscle cars then, not the hot hatches! Though to be fair, the most popular street drifting vehicle here is probably a Toyota Camry! Only ever filled with 98 octane, but fuel quality here is appalling (ironically). 50+ degree IAT doesn't help either!
  16. My detuned (Middle East spec) car dyno'd at 280BHP when stock.
  17. Kept the Armytrix catless DP with stock catback for a while, but then when I upgraded my turbo the exhaust kept coming apart at the reducer from the back pressure whenever I'd do a hard pull. In case you're wondering, these cars sound f*cking horrible with just a downpipe and no catback 🙈 Got a BCS catless TBE now, and it sounds and flows beautifully. And zero drone when cruising, so win-win!
  18. I actually don't think the drone you experienced at 3000 RPM was only because of the valves opening or closing, although that certainly may have exacerbated it. 3000RPM is just the RPM at which the resonant frequencies in our cars / engines cause drone, especially when you have no centre resonator. I used to have an Armytrix full TBE (straight through midpipe, no centre box) which is a VERY loud exhaust. Even with the valves permanently closed, as soon as you'd cross 3000 RPM it was like hitting a switch - the car would have the most horrible, buzzing drone you could imagine. Passengers hated it, and those in the back couldn't even hear those in the front. It was horrendous. And that is with the valves closed - cruising at 3k RPM with the valves open was just not even possible, unless perhaps you were deaf. It literally started just after 3000RPM, and as soon as you crossed ~3800-3900 RPM, all was quiet again. Highway cruising speed limit where I live is 140kmh, which is right in the middle of the drone zone. You can cruise up to about 132kmh with no drone, or beyond 150kmh with no drone, but if I was doing 140 I used to cruise in 5th gear - it was wayyy quieter than 6th!
  19. cheers they're limestone grey - the bronzey/goldy tinge in them doesn't pop like the panels cos they never catch the sun, but they actually match pretty well in real life. Front and rear VW logos are also LSG. exhaust tips are black. roof is black. pretty much everything is black. so i may be a bit biased but i still reckon the gloss black rims will look the best with LSG.
  20. Dealing with BCS was honestly one of the best customer experiences I've had. even before pulling the trigger, had several long chats with Nige and another gentleman (whose name I can't remember now), exchanged a bunch of emails, ordered and received in the UAE in a much shorter timeframe than initially indicated. So excellent customer service, and an excellent product. No brainer!
  21. Personally I find LSG to be such a weird and nuanced colour that it is really hard to pick another metallic shade that doesn't clash. I hated that when I bought the car, there was LSG metallic paint, chrome logos and R badges, matte silver mirrors and splitter, and gunmetal pretorias. Was like a patchwork of different metallic shades and looked all sorts of wrong. I've blacked out or removed everything now, and I honestly much prefer the look. LSG and gloss black just look awesome together.
  22. That does sound like exactly the same problem I was facing when I posted this thread. If I remember correctly, this was solved through subsequent map updates - although to be honest I am constantly adding bits and bobs, and we're constantly updating my map, so I can't 100% say what exactly fixed it - only that it is gone now! Would be very concerned if this happened on a stock car - if it's something you can replicate easily, I'd be taking it back to the dealer for sure - though i imagine this will be a nightmare to identify and resolve. All I know is that the problem went away after some map updates, and the only hardware I can remember changing around the same time was sparkplugs. Sorry to not be of more help!
  23. Had an Armytrix TBE before, have a BCS TBE now. Honestly it is the best sounding and best built system I have seen for this platform (have seen/heard Armytrix, iPE, Milltek, and Invidia).
  24. 1600 AED - which is about 350 GBP nowadays (because the pound is worth less than monopoly money!) No idea how much you'd have to pay in the UK to be honest..
×
×
  • Create New...