2016 Wolfsburg wagon
New Members-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by 2016 Wolfsburg wagon
-
Golf 7R, from stock to stage 2 or stage 3?
2016 Wolfsburg wagon replied to Rob s.'s topic in Modifying your Golf R MK7
I went from stage 2 HO APR to stage 3 Racingline and would have to say in retrospect that a good stage 2 tune is the sweet spot for the MK7R IMO. -
Disappointed APR stage 2?
2016 Wolfsburg wagon replied to Scott_Wills7R's topic in Modifying your Golf R MK7
Is your car an estate? -
2016 R APR stage 2 tune
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
My understanding is the rear exhaust section on the hatches is pretty good, with many on the forum who have gone stage two leaving the rear muffler in place. The estates exhaust is completely different, with no valves and two separate chambered mufflers either side of the spare wheel well. My tuner said he thought the Y piece was the same size as in the standard 1.4 TSI estate. Anyone tuning stage 1 or 2 in an estate would be well down on power to the equivalent tune in a hatch unless they upgraded the whole exhaust system. -
2016 R APR stage 2 tune
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
Hi WarpSpeed R I found (after making this post) that the exhaust "y piece" on the R estate was a major restriction. Fixed this and gained 25hp and 20nm. Have since gone stage 3 with now 485hp 580nm and found the rear mufflers were another 25hp restriction at stage 3 levels. Still not enough. Have posted Dyno charts before and after rear muffler change a while ago. made a big change to spool-up too. All depends on you're expectations I guess. -
APR stage 2+ to OEM stage 3+ review
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
I'm getting the rear mufflers changed to custom straight through 2.5" on both sides (estate) tomorrow which should pretty much remove all restriction and give close to the second graphs performance. Will report on the improved response and drivability in the next couple of days. I'd love to know if there are any tried and proven modifications that would help the turbo spool up a bit quicker? I've been thinking of a 3.5" down pipe and maybe doing the rest of the intercooler piping, WMI ... maybe a stacked JB4 ...? Have any of the other Stage 3 guys tried or tested anything? -
APR stage 2+ to OEM stage 3+ review
2016 Wolfsburg wagon posted a topic in Modifying your Golf R MK7
Hi all, thought you might be interested in a short review of my experience upgrading from APR Stage 2+ to the new VWR OEM Stage 3+ on my MK7R Estate. Firstly, my modifications were as follows: - APR High Torque stage 2 tune - APR FMIC - APR Carbon fibre Intake and connecting pipe - CTS Hi-flow turbo inlet elbow - Neuspeed Hi-flow discharge pipe - Scorpion downpipe (catted) and 3" system all the way back to stock rear mufflers - APR DSG tune Then went Stage 3, which involved the following changes: - Changed APR intake to VWR600 (VWR recommendation and unfortunately ran out of time to dyno test both options) - VWR OEM+ turbo - HPFP upgrade - VWR turbo inlet elbow - VWR large bore silicone piping from turbo inlet to VWR600 Intake - OEM+ DSG tune with raised rev limiter to 7100 rpm The below dyno sheets show runs with stock rear mufflers in place and then with rear exhaust section disconnected to remove this potential restriction. As you will see it made a noticeable difference in power and spooling point. As you will see by the chart which has both graphs on it there is a huge difference in where the two different setups spool. this translates to a vastly different car to drive. for 90% of day to day driving I really miss the immediate responsiveness of the Stage 2 tune, that wave of torque has moved to a new postcode... but... once on boost it is a different animal. Much, much faster car that pulls harder and harder the more you rev it. Other differences noted are that the VWR600 makes a lot more noise than the APR Carbon Fibre unit, the OEM+ DSG tune is quite different to the APR DSG tune, although neither are perfect, and finally the OEM+ tune IMO is not quite as refined and near perfect as the APR one. It has a couple of dead spots in it that gives the impression there is a bit more calibration work to be done. Full throttle it is fine but in some situations on light throttle inputs there can be a noticeable hesitation. -
BCS Powervalve launches new Downpipe variant
2016 Wolfsburg wagon replied to nige bcs's topic in Modifying your Golf R MK7
Great looking downpipe Nige. Could I ask, have you done any testing with a 3.5" downpipe? -
Burger Tuning JB4 information thread
2016 Wolfsburg wagon replied to george@BMS's topic in Modifying your Golf R MK7
Hi Micloi, Which stage 3 kit was that? Did you pick up much improvement from the JB4 and WMI? Would you have any Dyno charts you could share before and after? sorry for all the questions... -
Burger Tuning JB4 information thread
2016 Wolfsburg wagon replied to george@BMS's topic in Modifying your Golf R MK7
Hi, I have a VWR stage 3+ on my MK7R and would like to try to stack a JB4 to get a bit more out of it. it is quite laggy compared to the APR stage 2 I had before and i'm hoping it is in the tune rather than the turbo size. Has anyone had experience with this kit and especially if anyone has tried stacking a JB4 to it?? -
Custom 3.5" Decat Downpipe
2016 Wolfsburg wagon replied to HamidS92's topic in Modifying your Golf R MK7
I think there's plenty of scope to "tune" the sound of your motor between the back of the 3.5" section and the exhaust tips! -
Custom 3.5" Decat Downpipe
2016 Wolfsburg wagon replied to HamidS92's topic in Modifying your Golf R MK7
CTS in the US also do a 3.5" to 3" downpipe. I would love to see some before and after dyno results for this mod. I think both the Bull X and CTS ones are for LHD only though. -
A bit more turbo whooosh!
2016 Wolfsburg wagon replied to Simon-R's topic in Modifying your Golf R MK7
I have an APR carbon fibre airbox and Carbon fibre turbo inlet pipe (as well as APR FMIC, Scorpion TBE and APR Stage 2 tune and DSG tune) and with this combination I could hardly notice any more noise from the turbo over stock (I have the wretched soundaktor disconnected). Then fitted a CTS high flow turbo inlet pipe as the final link and wow! so much more noticeable turbo noise. I can now hear the DV discharges very clearly and the turbo flutters and whooshes all the way to redline...love it! The car also pulls noticeably stronger right through the rev range. https://www.goapr.com/products/intake_ea888_gen3_mqb.html http://www.goapr.com/news/2015/12/17/apr-presents-the-carbon-fiber-turbo-inlet-pipe-for-the-mqb-platform/ http://www.ctsturbo.com/cart/products/CTS_Turbo_MQB_High_Flow_Turbo_Inlet_Pipe-4881-0.html -
Stage 1 tune too slow?
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
In defence of my tuner, he has registered it with APR as a possible software fault. If it is a software fault then it would mean both stage 1 and stage 2 tunes (on my car) were dud because the outputs were almost identical. Hopefully APR can come up with a solution quickly. Having spent almost $10k so far, to get a result which is less than a normal stage 1 tune is very frustrating. -
Stage 1 tune too slow?
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
I may be on to something here... Just had APR stage 2 done, APR FMIC, APR intake and turbo inlet pipe, Scorpion downpipe. Car should fly right? Sadly not. Dyno graph showed max hp of 350hp and 442nm (326 ftlb) @ 3350 rpm. graph (sorry I haven't worked out how to load it yet) was almost identical to the stage 1 result although the stage 2 was about 5 hp and 10 nm down all the way through the rev range to 5200 rpm when it continued 15hp above stage 1 in the top end maxing out at 356.4 hp @ 6465rpm. The tuner said the power may be a software issue or may be related to the fact that the estate/wagon appears to have a much more restrictive rear exhaust section. (completely different to the hatch and with no valves) has anyone else tuned an estate / wagon with similar results? -
3" or 3.5" downpipe?
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
ok, that's interesting. did the downpipe increase the exhaust noise much more than standard? -
About to go stage 2, and potentially stage three once APR releases this stage, but right now I have to decide on the best downpipe to support the stage 2 tune (but with st3 in mind). Has anyone done any dyno testing of the benefits of going with a 3.5" downpipe over against the more common 3"? There's not many of them around for the MK7 other than the Bull X which is for LHD vehicles only, and the CTS one which looks pretty rough IMO. It seems many of the stage 3 MK6 builds went with the 3.5" or the divorced style which now doesn't suit the IHI turbos. I'd be grateful of any opinions and advice on this as well as anyone with a catted downpipe and how much extra noise they produce (I'm looking for best performance least noise).
-
Stage 1 tune too slow?
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
Thanks for the responses Because my car is an estate it is already 70kg up on the hatch which costs it 0.2 secs 0-100 in most of the magazines (5.1 or thereabouts). Assuming that's with an 80kg driver then we had roughly 160kg of additional ballast, or 2.3 x 70kg. 2.3 x 0.2 equals 0.46 seconds loss due to the extra weight, meaning with just the driver it should be getting 4.5 seconds 0-100kmh Anyway, enough talk, off to the dyno, on with stage 2 and I'll update with the results! -
Having recently had an APR stage 1 tune done to my MK7 R (as well as DSG tune) and felt pretty underwhelmed at the result (it's noticeable but only just) I thought i'd invest in a performance box to do some accurate times. went out this morning with a couple of friends and the best I could get 0-100kmh was 5.0 seconds flat! Very disappointing. Would love to know how folks are getting sub 4.0's. I imagine the extra passenger weight might add a few tenths but not a whole second! Not sure how much of the poor performance is attributable to passenger weight but all up for the three of us would have been 240kg max. outside air temp was 22 degrees. also worryingly, after only one launch I got a "gearbox overheating" warning light for each launch afterwards. Clearly I need to try it one up and will post the hopefully better results. I don't have any dyno figures for the stage 1 tune yet but have the car booked in next week for full APR stage two treatment with APR IC, Intake, Scorpion downpipe and stage 2 Tune. have asked for dyno readings with each mod so hopefully will get a reasonable improvement and some idea of where the gains are coming from. Has anyone else had a bad result from APR stage 1 tune or seen the overheating gearbox warning light coming on? At this rate i'll be needing the full stage 3 to get anywhere near 4.0 secs 0-100 kmh, which was my goal with stage 1!
-
2016 R APR stage 2 tune
2016 Wolfsburg wagon replied to 2016 Wolfsburg wagon's topic in Modifying your Golf R MK7
Thanks for the info. I haven't got any dyno figures yet but it's only getting around 4.5secs 0-100 at best. I was really hoping to get under 4.0 but may have been a bit optimistic as the wagon / estate is about 75kg heavier. Will have to wait for stage 3. -
Hi, just had a stage 1 APR tune done as well as the DSG tune. big difference but not as much as I was looking for. does anyone have any critical analysis of a stage 2 APR tune on a MK7 golf? downpipe, intake and preferably the APR Intercooler upgrade. i'm waiting for stock for these items and hoping they will make a difference. has anyone tried this combination? I don't want a lot of noise so hope it is close to stock sound levels. just want the go! does anyone have 0-100 times for this combination?