Jump to content

2016 Wolfsburg wagon

New Members
  • Posts

    20
  • Joined

  • Last visited

About 2016 Wolfsburg wagon

  • Birthday 12/02/1989

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

1,653 profile views

2016 Wolfsburg wagon's Achievements

Member

Member (2/9)

8

Reputation

  1. I went from stage 2 HO APR to stage 3 Racingline and would have to say in retrospect that a good stage 2 tune is the sweet spot for the MK7R IMO.
  2. My understanding is the rear exhaust section on the hatches is pretty good, with many on the forum who have gone stage two leaving the rear muffler in place. The estates exhaust is completely different, with no valves and two separate chambered mufflers either side of the spare wheel well. My tuner said he thought the Y piece was the same size as in the standard 1.4 TSI estate. Anyone tuning stage 1 or 2 in an estate would be well down on power to the equivalent tune in a hatch unless they upgraded the whole exhaust system.
  3. Hi WarpSpeed R I found (after making this post) that the exhaust "y piece" on the R estate was a major restriction. Fixed this and gained 25hp and 20nm. Have since gone stage 3 with now 485hp 580nm and found the rear mufflers were another 25hp restriction at stage 3 levels. Still not enough. Have posted Dyno charts before and after rear muffler change a while ago. made a big change to spool-up too. All depends on you're expectations I guess.
  4. I'm getting the rear mufflers changed to custom straight through 2.5" on both sides (estate) tomorrow which should pretty much remove all restriction and give close to the second graphs performance. Will report on the improved response and drivability in the next couple of days. I'd love to know if there are any tried and proven modifications that would help the turbo spool up a bit quicker? I've been thinking of a 3.5" down pipe and maybe doing the rest of the intercooler piping, WMI ... maybe a stacked JB4 ...? Have any of the other Stage 3 guys tried or tested anything?
  5. Hi all, thought you might be interested in a short review of my experience upgrading from APR Stage 2+ to the new VWR OEM Stage 3+ on my MK7R Estate. Firstly, my modifications were as follows: - APR High Torque stage 2 tune - APR FMIC - APR Carbon fibre Intake and connecting pipe - CTS Hi-flow turbo inlet elbow - Neuspeed Hi-flow discharge pipe - Scorpion downpipe (catted) and 3" system all the way back to stock rear mufflers - APR DSG tune Then went Stage 3, which involved the following changes: - Changed APR intake to VWR600 (VWR recommendation and unfortunately ran out of time to dyno test both options) - VWR OEM+ turbo - HPFP upgrade - VWR turbo inlet elbow - VWR large bore silicone piping from turbo inlet to VWR600 Intake - OEM+ DSG tune with raised rev limiter to 7100 rpm The below dyno sheets show runs with stock rear mufflers in place and then with rear exhaust section disconnected to remove this potential restriction. As you will see it made a noticeable difference in power and spooling point. As you will see by the chart which has both graphs on it there is a huge difference in where the two different setups spool. this translates to a vastly different car to drive. for 90% of day to day driving I really miss the immediate responsiveness of the Stage 2 tune, that wave of torque has moved to a new postcode... but... once on boost it is a different animal. Much, much faster car that pulls harder and harder the more you rev it. Other differences noted are that the VWR600 makes a lot more noise than the APR Carbon Fibre unit, the OEM+ DSG tune is quite different to the APR DSG tune, although neither are perfect, and finally the OEM+ tune IMO is not quite as refined and near perfect as the APR one. It has a couple of dead spots in it that gives the impression there is a bit more calibration work to be done. Full throttle it is fine but in some situations on light throttle inputs there can be a noticeable hesitation.
  6. Great looking downpipe Nige. Could I ask, have you done any testing with a 3.5" downpipe?
  7. Hi Micloi, Which stage 3 kit was that? Did you pick up much improvement from the JB4 and WMI? Would you have any Dyno charts you could share before and after? sorry for all the questions...
  8. Hi, I have a VWR stage 3+ on my MK7R and would like to try to stack a JB4 to get a bit more out of it. it is quite laggy compared to the APR stage 2 I had before and i'm hoping it is in the tune rather than the turbo size. Has anyone had experience with this kit and especially if anyone has tried stacking a JB4 to it??
  9. I think there's plenty of scope to "tune" the sound of your motor between the back of the 3.5" section and the exhaust tips!
  10. CTS in the US also do a 3.5" to 3" downpipe. I would love to see some before and after dyno results for this mod. I think both the Bull X and CTS ones are for LHD only though.
  11. I have an APR carbon fibre airbox and Carbon fibre turbo inlet pipe (as well as APR FMIC, Scorpion TBE and APR Stage 2 tune and DSG tune) and with this combination I could hardly notice any more noise from the turbo over stock (I have the wretched soundaktor disconnected). Then fitted a CTS high flow turbo inlet pipe as the final link and wow! so much more noticeable turbo noise. I can now hear the DV discharges very clearly and the turbo flutters and whooshes all the way to redline...love it! The car also pulls noticeably stronger right through the rev range. https://www.goapr.com/products/intake_ea888_gen3_mqb.html http://www.goapr.com/news/2015/12/17/apr-presents-the-carbon-fiber-turbo-inlet-pipe-for-the-mqb-platform/ http://www.ctsturbo.com/cart/products/CTS_Turbo_MQB_High_Flow_Turbo_Inlet_Pipe-4881-0.html
  12. In defence of my tuner, he has registered it with APR as a possible software fault. If it is a software fault then it would mean both stage 1 and stage 2 tunes (on my car) were dud because the outputs were almost identical. Hopefully APR can come up with a solution quickly. Having spent almost $10k so far, to get a result which is less than a normal stage 1 tune is very frustrating.
  13. I may be on to something here... Just had APR stage 2 done, APR FMIC, APR intake and turbo inlet pipe, Scorpion downpipe. Car should fly right? Sadly not. Dyno graph showed max hp of 350hp and 442nm (326 ftlb) @ 3350 rpm. graph (sorry I haven't worked out how to load it yet) was almost identical to the stage 1 result although the stage 2 was about 5 hp and 10 nm down all the way through the rev range to 5200 rpm when it continued 15hp above stage 1 in the top end maxing out at 356.4 hp @ 6465rpm. The tuner said the power may be a software issue or may be related to the fact that the estate/wagon appears to have a much more restrictive rear exhaust section. (completely different to the hatch and with no valves) has anyone else tuned an estate / wagon with similar results?
  14. ok, that's interesting. did the downpipe increase the exhaust noise much more than standard?
×
×
  • Create New...