TheBear
Members-
Posts
778 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by TheBear
-
Alloy Wheel thread , show me what you've got !!
TheBear replied to dazie00's topic in Modifying your Golf R MK7
Do you still have these fitted? -
Going new TTV4 as have been offered a great deal without req to supply a core IS38 👍🏼 Also got a Black Friday deal on a do88 upgraded charge-pipe kit so just the 4 bar map sensor to get now.
-
-
Kieran, have sent you a DM regarding feedback on the TT V4, also do you happen to have a RR plot of the figures ? Cheers
-
You'll easily see 480-520+bhp from a TT V4 turbo, even a V3 is easily doing 480bhp at 1.8 bar and 510bhp at 2 bar 102RON map. V3 spool is like stock if you overlay the RR plots. V4 slightly shifts it up the rev range but not massively See below for an example of 2xV4 and 1x Garrett Powermax S1 RR plot results, similar with both making 300bhp by approx. 3,500 rpm but a more noticeable spike on the V4 from 3,800 rpm. I'll try to find a RR plot of the V3 and will post later on.
-
Only way you'll see that sort of numbers from a Powermax is by going e85 Flex Fuel, not what I want to be doing tbh as cost is £1,000's more. 99RON tune will only see max 450-460bhp from an S1
-
Already have both, having spoken to Rick I won't see more than 420bhp with the Littco L380X
-
Morning all, Due to recent changes to circumstances/life-events I've decided to take the plunge and go stage three with my MY19 7.5R estate so am busy collecting parts....with the hope that come Black Friday I can pick up something cheaper than currently listed prices. Last things to get hold of are an upgraded charge-pipe kit (will be do88 to match FMIC), 4-bar map-sensor (probably Precision Raceworks) and a hybrid-turbo, so far am considering the following turbo-wise: Littco L450/480 @ around £1490 - £1,600 outright cost Fastline FL460/480 @ around £1,450 - £1,650 outright cost TurboTechnics V4 @ £1,584 exchange (no outright purchase poss) + IS38 donor @ £350-£450 = approx. £2k TTE475 @ £1,684 exchange + IS38 donor @ £350-£450 = approx. £2,100 OR £2,213 outright cost Garrett Powermax S1 approx. £1,400 outright cost Now I'm not looking for massive power output but rather a safe and reliable set-up; key things of importance to me are stock-like spool/response with minimal lag, no loss of driveability and reliability, ideally I'd like to be seeing figures of around 470-500bhp and 420-450ft-lbs torque, custom remap will be getting done at the likes of Unicorn, Devil, MRC etc. It's a MY19 GPF model so the GPF will be getting removed and mapped-put (happens anyway with the Scorpion sports-cat DP being fitted). I already have all the other required hardware parts either fitted or in-hand to support going stage 3 inc. FMIC, upgraded LPFP/HPFP's, colder NGK plugs etc. Has anyone gone the same way and can provide advice/feedback on any of the above turbo options ? Cheers
-
Anyone running Porsche Macan brake set-up with 8.5x19" ET45 Team Dynamics Prorace 1.3's ? Reason I ask is currently running 8x19" et44 BBS CK's with 12mm spacers to clear the brakes (also have the Racingline stud-kit fitted) but will be switching to the TD's for winter. Am hoping to not have to run the spacers to clear the brakes with the TD's fitted as with the 12mm spacer this will make the offset et33 and combined with the extra half-inch width will mean this is unmanageable. Fitting them without spacers will mean the wheels will sit 19.5mm closer to the strut and 6.5mm in from the arch (meaning 6.5mm closer to brake-caliper face), to get the equivalent spacing caliper-wise I'd need to run a 5-8mm spacer (prefer not to have to run a non-hubcentric spacer which would mean running VBT hub-extenders etc), but if if the wheels clear the brakes without spacers I'll be good but the stud-kit bolts will stick out about 12mm which will look silly and I'd rather not have to go to the expense of buying new stud-insert and having to break the Loctite and change these out every summer/winter. Thought on this would be welcome folks especially if running these same brakes and wheels, cheers
-
Got a complete MK7/7.5 estate Boot Buddy available including bumper protector of someone wants
-
Mine was missing upon delivery and just had two large holes....took supplying dealer 2 months to sort it and I had to travel 100 miles to have it replaced under warranty at local dealer and then back charged to Inchape VW Cheltenham.
-
Samantha Horton, fleet manager
-
Been a very very long wait for this🤦🏻♂️ but worth it in the end, glad I stuck with it and didn't cave for an a35 AMG 😍 thanks to RS Autospa Montrose for the prep and full detail inc. ceramic-coating and Ecotyres Arbroath for wheel/tyre fitment (no thanks to Inchcape VW Cheltenham 🤡 😆, still waiting for replacement driver's grab handle missing upon delivery). Looking forwards to getting some miles on her and enjoying, sorry (not sorry 🤷🏻♂️) for pic heavy post 🙈🚗 #shinyshiny #theredwagon#7.5R #needsroofbars #RS Autospa #fireballKorea #Ecotyres Arbroath
-
MK8 R won't be hybrid, VW already said they have turned away from this for MK8. Won't be 400bhp either, 320-330bhp is my estimate.
-
Last lease R came from them, 156 miles away. This time it came from Inchcape VW Cheltenham, 432 miles away. Luckily both times on transporter. All depends which dealer ordered it in first place as lease brokers aren't necessarily selective in terms of whom they use to supply cars.
-
Picked up the R from detailers earlier, looks stunning. Pics tomorrow once wheels are fitted (sadly having to fit without spacers as they were supplied with incorrect bolts for wheels and in any case spacers are likely too wide for my wheels 🙄).
-
Ingrams special 😉
-
The rendered front is quite different, also swage line is higher and also seems wider to me (Autocar front page and that German car video).
-
It's a render, not a real image.
-
400bhp wont happen, 320-330bhp likely.
-
That would figure 😉
-
My new R has just undergone a full new car detail including stage 1 correction and full ceramic coating. Detailer has remarked that the paint is extremely soft, much more than any other MK7 or 7.5 they have worked on in the past.
-
I bought the OEM VW MK7 Golf ones, thought the chrome polished ones looked a bit Max Power. OEM sill protectors were under £40 delivered from VW dealer on eBay.
-
Dealer contributing £120 to cost of machine-polish to remove bonnet scratch, everything else in limbo.
-
Well it all kicked off today, still fighting with Inchcape Cheltenham after threatening to get VW CS involved, namely over refusal to accept responsibility for losing v778 retention form and refusal to order and fit replacement drivers grab handle via mobile tech at home address. Scratch issue also still to be resolved, being repaired at my cost via stage 1 machine polish and will be billing them for work to rectify.