Jump to content

evo GT

New Members
  • Posts

    13
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://www.flickr.com/photos/evo_gt/

Profile Information

  • Gender
    Not Telling
  • Location
    South Wales
  • Interests
    http://www.flickr.com/photos/evo_gt/

    https://youtu.be/xbdNC6MnjjM

Personal Information

  • Name
    Gareth

evo GT's Achievements

Member

Member (2/9)

28

Reputation

  1. Those of you interested, the "R" is actually a 2013 2.0TDi 150PS. Might explain the blackened exhaust tips
  2. It could be my photo - my iPhone took the photos as HDR which tends to give areas in the shade a slightly different brightness when re-combined as a single image.
  3. Admittedly both of us could have cleaned our cars before this impromptu photo shoot...but hey I personally don't know the owner of this R400 body-kitted Golf, i was just passing and thought I'd share some photos with you guys, to hear your thoughts on the body kit look etc. Personally I'm not sure Lapiz Blue is the best colour to show it off, but the front and rear obviously do look more aggressive than OEM. I didn't actually look inside to see if there was any further upgrades, but either way it's a fair outlay to spend on a car for that unique look. I believe the Golf in question is not an actual R for two reasons - It was a 2013 (13 Plate) car non-personalised number plate (I don't believe the R was launched until later 2014); It had Golf GTi esque rear lights and not tinted like mine - if it was an "R" wouldn't you leave the tinted lights in? Obviously the Ferrari air-freshener makes up for both of those
  4. The vinyl decal fitted straight over the top - easy to line up that way. I'm not sure the OEM decal could be removed
  5. Wheel spacers fitted front and back (Forge Motorsports F11mm & R16mm), very pleased with the look
  6. VW Golf R by Gareth Thompson, on Flickr
  7. Added at least 10kN of braking power with these colour coded additions... If anyone's interested: http://www.ebay.co.uk/itm/381444593759?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT They were quite easy to fit with the wheel removed, but i would recommend spraying a little water on the caliper and decal to aid positioning.
  8. VW Golf R by Gareth Thompson, on Flickr VW Golf R by Gareth Thompson, on Flickr
  9. Just to correct myself, now I've copied the link, the locking nuts are 41mm thread length, so they're close enough in my opinion to not need two sets. Amazon are asking just over £30 for the McGuards, the normal bolts are about £1.80 each from Awesome. I think Demon Tweeks have similar options. https://www.amazon.co.uk/gp/product/B0048EJNZC/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
  10. I took some advice from Awesome GTi as there seemed to be mixed opinions. I've gone with 45mm bolts for the rear and 40mm for the front. I bought a set of McGuards locking nuts at 40mm as they'll only be about 2-3mm short at the rear. They went on fine this morning with a good 5mm of thread. I have 11mm front on order with Forge as they'd ran out of stock. They are hub-centric as confirmed Rich_D
  11. Cheers, I'm pleased with the effect. They are a relatively cheap upgrade, I bought direct from Forge. No negatives to report just yet, but I've only driven about two miles since fitting. I'll see how it goes on the commute tomorrow.
  12. Fitted rear wheel spacers. Forge 16mm if anyone is interested. Intending to put 11mm on front as others have done
  13. Hello all. Just collected my first R. Sorry to have left the GTi club, but had an itch for an extra pair of exhaust pipes and very happy with it's replacement and number plate
×
×
  • Create New...