Jump to content

casper22

Junior Members
  • Posts

    40
  • Joined

  • Last visited

Everything posted by casper22

  1. hello Rod i,m on unicorn stage 2 manual with helix clutch, should have had the clutch fitted first ( already had the clutch) as only just made it home on standard clutch so my advise would be fit uprated clutch first if you have a manual then remap
  2. i,m with adrian flux unicorn stage 2, helix clutch, bsc downpipe, eibach pros, uprated brakes,dog mount, tip and air box mod added about an extra £140 on my insurance
  3. fag, skf, ntn/snr are all good well know bearing companys, sorry i don,t know who makes the oem ones
  4. i have the helix organic clutch , i,m stage 2 unicorn map 392lbft torque , already had it it ready to go in as i knew i would need one , standard clutch started slipping on drive home , had jb1 with standard clutch but it didnt slip, stage 2 is expensive but worth it
  5. i already had the helix clutch ready to go in probably should have fitted it first, made 390bhp and 392lb ft of torque on unicorn rollers , clutch started slipping on way home but its okay now with the helix clutch, expensive to go stage 2 but puts a big smile on your face when you drive it , when i was at unicorn just asked for as much torque as i could get
  6. i ran a jb1 on map 6 for about 12 months on standard clutch with no slippage ( no standing starts tho) now on unicorn stage 2 with helix clutch both highly recommended paul
  7. https://www.akstuning.co.uk/clutches/373-helix-orgnic-clutch-kit-for-vag-tfsi-engine.html#/select_drive_plate_type-organic_drive_plate/with_or_without_fywheel-flywheel_not_included
  8. https://www.triplercomposites.com/golf-mk7-r these were the ones i was looking at don,t know how good they are tho or the maxton design ones paul
  9. i will see if i can sort some for you not sure how to upload them tho paul
  10. i use boblov viofo a119 v2 small stealthy and 1440p and only £75
  11. i,m at workington about an hour down the coast ,where do you work ?
  12. are you far from carlisle ? could meet you there if so
  13. the bottom plug came off easy for me (first time) with a small flat screwdriver , i did watch a video first tho on how to do it , its worth when you put your foot down tho
  14. bet you miss the jb1 , i was going to use it till next summer then take it to unicorn for stage 1 or maybe 2
  15. how old is it and why did you remove it ? (building my posts up)
  16. lighting mcqueen i fitted a jb1 in december watched a few utube videos first drove it up on to a couple of solid breeze blocks ( did have a jack but lazy) had it all fitted in under 30minutes definitely worth it makes the golf come alive i am only on map 1 so far but its great and worth doing
  17. marshy sorry to butt in but i havent got enough posts yet will the downpipe you are selling fit on to standard system thanks paul
  18. any news on when the JB4 will be released ? cheers paul
  19. when i fitted mine it was quite tight had to put a touch of wd40 on the oring part to get it to turn and lock in
×
×
  • Create New...