Jump to content

JohnRRR

Junior Members
  • Posts

    25
  • Joined

  • Last visited

Everything posted by JohnRRR

  1. Hi Kev, May be worth taking a look into WSP Italy wheels, they do a lot of reps that are all made in Italy I believe. I had a set of Audi Rotors from them and they were great quality, set me back around £1,100 for 19'' a few year back so rather expensive in comparison to other reps but worth it imo.
  2. Hi all, Was wondering if anybody on here has had work done by Revolution Motorstore? I've used these for bits and bobs over the years but thinking about going stage 2 with them, they seem like a good bunch from what I've experienced in the past but was wondering on other people's thoughts. Cheers in advance!
  3. Unfortunately I can't take any credit for it, found it while browsing Reddit of all places! Probably the most informative post I've read about the TD1 codes though!
  4. Found this an interesting read on the TD1 codes...
  5. Hi Rob, If you fancy travelling a little further up North then it's worth giving Revolution a call, they're based in Gateshead (just across the river from Newcastle) and they're authorised VWR dealers.
  6. Hi Connor, I've never ran a Ramair intake but I've only heard good things about them. If you're open to suggestions then I'd recommend looking into the Racingline R600 intake if you haven't already, once of the first mods I done on my R and love it!
  7. Hi Speedkng, I highly recommend running Michelin Pilot 4 S if you're 235/35/19, ran these for around 3 month now and can't fault them. Been to a few trackdays but they've mainly been used for spirited driving. Got them for around £160 fitted per corner from memory.
  8. Hi Bobby, I've had NGK's for my old Impreza from a company called Revolution in Newcastle, I'd imagine they should be able to help or point you in the right direction.
  9. I run 19'' x 8.5 ET45 wheels on my R and they sit perfectly without spacers, I think the 10mm will be too much and cause a little rubbing.
  10. Click the link below and enter your postcode, every company on this site use the Hunter alignment machines. https://www.alignmycar.co.uk/
  11. That's strange, was always told differently by tyre reps.
  12. Definitely agree, don't want to be aquaplaning.. Quite a common myth that you should put new tyres on the front which is incorrect.
  13. As someone else mentioned, there isn't much between the different aftermarket panel filters but definitely worth investing in one as the standard paper filter is crap!
  14. Hi Stevie, I believe this is the case, I haven't came across any other brands that do thus far.
  15. Somebody with VCDS should be able to code any error lights off the dash.
  16. The best quality replica wheels that I have found are by a company called WSP Italy, they are quite expensive in comparison to other reps on the market as I'm sure they're around a grand (give or take) but all made in Europe I believe.
  17. Hi, It was the 4s as opposed to the normal 4, should probably have worded that slightly better! Ha.
  18. I got a set of 235/35/19 PS4's just before Christmas for £170.00 per corner (fitted, balanced etc) from Revolution in Newcastle.
  19. It's worth taking a look at WSP Italy wheels, best quality replicas about but you'll be looking at around £1,100/£1,200 for a set I'd imagine.
  20. Hi Pyropower, I got my exhaust from a company Revolution in Newcastle for my pre facelift, I'm sure they'll do something for the facelift version.
  21. I second VRS' opinion, I wouldn't put any other software on my car! Had a Leon Cupra and S1 stage 1 mapped and can't fault them, currently running a stage 2 on my R with APR software and a few other mods.
  22. I have one of these fitted on my R from a company called Revolution, great pieces of kit! Especially if you've mapped or looking into mapping your car.
  23. As above, 17'' is the smallest size but be careful with offsets if you're looking into aftermarket wheels.
  24. I had a 280 Cupra a couple of year ago ( albeit for a very brief time) and they have very clever diffs.
×
×
  • Create New...