Jump to content

DarkArrow

Junior Members
  • Posts

    48
  • Joined

  • Last visited

Everything posted by DarkArrow

  1. The car was running with an upgraded intercooler and intake. Official post from EQT is here. APR claims to make 410bhp or 364whp with their turbo & tune with no downpipe. EQT's uncorrected doesn't seem to be a stretch of possibilities. USA shops are moving towards factory downpipe mods, since federal government is cracking down on everyone doing anything to tamper with emissions.
  2. Intercoolers don't make more power, they help keep the power you have. So, a downpipe will have a higher power bump than an intercooler. That being said, I would recommend an intercooler before a downpipe. The factory intercooler gets heatsoaked incredibly quickly, especially on a tuned car. My datalogs on a stage 1 car was seeing IATs 30+ degrees f over ambient on a single 3rd gear pull. For some data points of some of the more popular intercoolers intercooler test
  3. From how many people will quote me and argue in every brakes topic thread, I'm clearly in the minority on this forum of thinking that the factory brakes are fairly capable. It honestly surprises me how quickly everyone jumps at completely replace your brakes if there's any question about them. OP has said nothing about the condition of his current brakes, pads, tires, etc on a 5+ year old car. Most likely by this point, pads and tires have either gotten to the point they should be replaced or they have been replaced. No one knows (even OP has stated he's unsure of condition), yet with absolutely zero information about that, the first 4 responses are change your brakes to RacingLine, RacingLine, TTS calipers, RacingLine. But, I agree. No point in arguing over the internet. It's OP's money. If throwing money into a BBK, pads, lines, fluid, and tires makes him enjoy the car more, then more power to him.
  4. Your car is 5+ years old. Do you know the history of the car? Maybe the basics like was it a daily driver or was it a weekend track warrior? I ask because very different maintenance requirements need to be done depending on usage. When was the last brake flush? What pads are on the car? What tires were you running on the AMG vs what's on the R now? So many things affect braking ability and I believe a common mistake is to assume upgrading the brakes means better braking. But, like anything else on a car, the brakes are only one part of a system. If you upgrade a piece of a system that isn't a limiting factor, then you don't really realize much benefit. There's also times where that "upgrade" actually results in worse braking performance. An example would be mismatching a BBK to the master cylinder.
  5. You also said Heat management is a big benefit. Bigger brakes deal with and dissipate high heat cycles far better than the stock setup. Ideal if you are doing spirited driving and almost essential for track work. OP asked for better stopping power. That's what my answer is aimed at. You keep bringing up different reasons for a BBK, Modulation, pedal feel, heat management, initial bite, weight, power, piston size etc are all things that could be taken into consideration too. None of which address the OP's question, which is stopping power. Yes, my only concern is if OP can trigger ABS because if he can, the ABS literally is reducing braking force to unlock the wheels, so he can not get any more stopping power from the brakes. If he can't trigger ABS, then that's something that has to be addressed with hardware, either failing parts or insufficient brakes. Because that's what he's asking about! Stickier tires will affect stopping distances WAY more than throwing on a BBK will. That's not an opinion, but a lot of people believe it is. Honestly, to me, it's interesting that your only concern is all the benefits of a BBK that do not address the OP's question.
  6. He mentions how poor the AMG is around town and doesn't mention track days at all. Assuming track duty seems to be a far jump. And even if we include track days, I had minimal issues with stage 1 power on factory calipers and rotors with better pads, fluid, RS3 ducts, and titanium shims. Stage 2, on the other hand, I'm running into a lot more issues. My point still stands that a BBK does not give better stopping power unless you're unable to activate ABS. (heat issues you're mentioning usually results in the inability to activate ABS)
  7. If you can lock your wheels and have ABS kick in, you won't get any better stopping power from a BBK. ABS is reducing your brake force to unlock the wheels and adding a bigger brake kit doesn't increase the amount of force before your wheels lock. The only real benefit at this point would be most BBKs might save some weight, so you have slightly less rotational mass and unsprung weight. If you can get ABS to kick in, stickier tires will affect your stopping power significantly more than pads, rotors, lines, a BBK, or anything else will.
  8. You're absolutely right, I am stateside and have not had the pleasure of experiencing roads in the UK. My first track event in my R was completely stock (including factory brake fluid... eek!). If you're able to drive even close to that in the UK, I'm not sure if I should be excited by the opportunity or afraid if your drivers are as terrible as they are over here. Rotors will always be up for debate. Wilwood has this warning on their site for drilled rotors: Caution on drilled rotors: There is a common mis-perception that rotors are drilled to improve cooling. The reduced mass of a drilled rotor will dissipate its retained heat quicker, but it also builds up heat a much faster rate. The decision to use drilled rotors should be solely based on the merits of the lower rotating and unsprung weight, and Nt for improved cooling. It is Nt wise to use drilled rotors in sustained high heat on hard braking tracks unless the team budget affords a high frequency of rotor and brake pad replacement. You had already highlighted the positives of SS lines in a previous post, so I just wanted to add the positives of keeping the factory lines. There's no wrong answer going either way. I've already gone through 3 sets of track pads and 1/2 of my factory pads, and my car only has 28k miles. I think I'm using the car for what it's made for. 😁
  9. You're really overthinking this. Do you like how the car feels currently? Is there any reason why you think you need better pads other than being stage 1? IMHO, you should modify only if you're unhappy with something. The R brakes are more than capable on street application, regardless of how much horsepower you make. If you're overloading your factory brakes on the street, you're either taking twisties extremely hard or you're doing something highly illegal. As long as you can lock your wheels, you can NOT get any better braking from your brakes, period. Your ABS is literally reducing braking force to unlock the wheels. The short version is, unless you're overheating your brakes which shouldn't happen on public roads, tires will affect braking a million times more than upgrading braking components. If you want the longer version.... Pads are purely subjective. Most people seem to be fine with the factory brakes outside of how much they dust. If you're happy with them, why spend more on pads that will not increase brake performance? Fancy discs are mainly for aesthetics on the street. Cross drilled, slotted, j-hooks, etc will not benefit a car driving on the street and will only increase pad wear and dust. Unless you're someone like Lewis Hamilton, you won't notice the 1kg loss of weight by running CSS discs. Solid, high carbon discs are more than sufficient for daily street driving, and are preferred by track drivers unless upgrading to a 2-piece set. Lines are also subjective. I prefer factory lines for street driving due to less maintenance requirements. While stainless lines usually have a teflon or PVC coating, it's still possible for debris to work its way into the weave and accelerate wear as it rubs the lines while they flex as you drive. Since the lines are covered by the stainless weave, it's more difficult to see any damage. Up to you if you think a tiny better brake pedal is worth the cost. My advice is to save your money on upgrading brake parts, and if you want better braking put that money towards better tires. Buy better pads/fluid if you schedule a track day. Swapping pads is very simple on the R.
  10. Vorshlag and Ground Control make plates that do not require cutting into the body and can be adjusted without dropping the suspension. I personally run the Ground Control plates and I like them. There is an increase in NVH, but not significant enough that I wouldn't do it to a daily driver. Can't speak from personal use on the Bilsteins, but most of the information I've seen is they're too soft for any real track usage.
  11. The factory brake system is more than enough for a stage 1 or 2 on a non-track application. The reason why Stage 1 or more on track starts to overwhelm the factory brake system is due to the extra heat the brakes generate from having to stop a faster car. This increases the chance of boiling the fluid, glazing the pads, etc. You shouldn't experience these issues on a public road without doing something stupid or illegal. The main reasons for a BBK on these cars are a larger disc acts as a better heatsink, the increased surface area of larger disc sheds heat faster, and a lighter 2-piece disc is less rotational mass. None of these benefits are really applicable to a road car. I don't have any first hand experience with the Macan calipers. I did research on them when people started swapping them over, but I currently don't see a benefit worth the cost. From my understanding the benefits are top loading pad swaps, using Mk6 R 345mm discs, and you get 4 piston calipers. The extra 5mm will very slightly increase the torque arm of the brakes allowing for slightly increased braking force and the 4 pistons will give you a more even clamping pressure and better modulation of the brakes. That being said, if you can consistently lock your wheels and activate ABS, that extra braking force isn't doing anything because your ABS is releasing brake pressure to unlock your wheels. Once the braking force overloads the tire's grip, you're not stopping any faster. A better tire will have a bigger impact on stopping distance, which is where I'd rather put the money towards instead of buying the Macan calipers.
  12. A couple highly recommended modifications for a track day to add to your list: - RS3 brake ducts. Inexpensive, fit like OEM, and are fairly effective. Won't replace a true ducting system, but people have shown they do help cool the rotors a decent amount. - Rear sway bar. IMHO, one of the biggest bang for buck mods for the R. Helps neutralize understeer. I haven't had any issues of snap oversteer that some other cars struggle with when you put a big rear bar on. On factory power, the factory brakes on an R are adequate. You'll run into heat issues towards the end of a typical 25 minute session, but they hold up okay with DS2500s and good fluid. Don't waste your money on "upgraded" discs/rotors. The only ones that would probably help are Girodiscs and they're $800USD/pair. Not worth it. High carbon blanks work just fine, and you won't feel bad when you need to replace them often or swap to a BBK. If you run a stage 1, you're pushing the capability of the factory brakes, and stage 2 will most likely run into heat issues very early and should be thinking of getting that BBK soon. FWIW, my OEM rotors have lasted ~12 track days and they'll be needing replacement before the next event. Not sure about pricing in Europe, but SuperPro makes almost identical camber plates for cheaper than 034. If you want adjustable camber, I recommend Vorshlag or Ground Control. AFAIK, they're the only adjustable camber plates that don't require cutting into the strut top or pulling the suspension to adjust. Since the R doesn't have any adjustable front camber, outside of shifting the subframe, I bought adjustable to keep the camber even. I'm running the Ground Controls with ~ -2* of camber and have very even wear. I'm looking to add more negative camber next alignment. If you zero out the front toe, you won't have any significant tire wear issues with modest camber.
  13. Sorry for the novel. And don't worry, I see the irony between forum post and a forum post about another person who said . I agree, conclusive data would be best. Unfortunately, conclusive data requires a large sample size. EBC reds on a mk7 golf is extremely specific and would be an exhaustive task to find enough reliable data to create a large enough sample size to weed out statistical insignificance and create conclusive data. The juice isn't worth the squeeze. Because that data is not readily available, it leaves little else other than "my mechanic says..." or "track people who have used it say..." or "I used them before..." type posts. To address your last statement, IMHO, I have provided more support for my claims than anyone else in this thread. Additionally, if you read my initial post carefully, the only claim I made was I avoid them due to information from numerous sources I find reliable. While you may dismiss this data due to previously stated reasons, I believe at least some is worth more than "I like them" posts. If, as you posted, there's equal chance of the pads failing as there is the driver being a cockwomble. I ask myself, is that a good enough chance to trust my life on, when there's many different alternatives that don't require that chance?
  14. The value I see in the link is a person showing what happens when they literally followed a How-To on EBC's website titled "How to bed in your new brakes for street/urban driving" along with a spattering of other posters who have had bad experiences with EBC. While there might be an updated method, that article is still available on EBC's website and it should not have destroyed their pads to that level. If you think it's acceptable for pads that are advertised as "fast street pad" and "capable of repeated heavy brake use" to fall apart like that on 10 hard 60-10 stops, vs the updated 5 hard 60-10 stops, then we'll just have to agree to disagree. When I make claims, especially negative claims, I like to back up my claims with data. I'm sorry you don't find value in this. The value of a mechanic who specializes in VW & Audi and has over a decade of experience has probably seen more brake pads than most people on this forum would see in a lifetime. I would put more trust into their opinion than random people on a forum (I know that's all I am as I post this). Again, I'm sorry you don't find value in this. Feel free to block me and ignore my posts from now on, because from my perspective, I see you place higher value in random strangers on a forum who say "I use them, they're great" with no additional information. You do you, I won't be offended by you ignoring me. Addressing the track use (which I never said redstuff was recommended for), when a brake pad company advertises a use for a specific pad and it does not perform up to that, it throws a red flag. As stated previously, Redstuff is advertised for "fast street" and "repeated heavy brake use." Yellowstuff is advertised as "track OK" and "zero brake fade" yet from what I've seen by people who I trust (why I even brought up track usage), EBCs have a reputation to fall short. Nowhere did I say redstuff was suggested for track use, because they're clearly not. EBC is a company, not one specific pad. Pad quality across their different lines is not mutually exclusive. If they have pads that, from multiple trusted sources for me, have fallen short, I would stay away from them. I agree mechanical sympathy is important to driving situations, but following a posted bedding strategy by the manufacturer resulting in pads literally crumbling would scare me away from ever using those pads when there's so many other options available. I wouldn't classify following manufacturer's procedure being mechanically asympathetic. I'm also not sure how that classifies the operator as a "f**k all" or "does not know how to drive with new pads and brakes." I've posted before about EBC and have gotten similar reactions. That's why I included the last paragraph. Guess it didn't help. Across the pond in the US, EBC does not have a very good reputation and I guess I should keep that information on this side of the pond. Most of this was posted just above. The method the poster used is still available on EBC's website and is titled "How to bed in your new brakes for street/urban driving" I'm not sure how I could determine this is an outdated method and to actively search for an alternative? If you think it's acceptable for pads that are advertised as "fast street pad" and "capable of repeated heavy brake use" to fall apart like that on 10 hard 60-10 stops, vs the updated 5 hard 60-10 stops, then we'll just have to agree to disagree. Even worse, if his pedal really did drop on the 8th stop, you're less than 3 hard stops away from bedding vs completely thrashed crumbling pads. Eeek. I've learned my lesson, though. Don't post about any bad experiences of EBC pads on this forum.
  15. I have never used EBCs due to warnings from my mechanic, friends who have 10x as much experience on track as I do, and seeing stuff like this: https://www.golfmk7.com/forums/index.php?threads/messed-up-my-new-brakes.367755/ I find it strange how there's a lot of people who have bad experiences on golfmk7, but I've seen a lot of posts like RS6BRIT who have great experiences on this forum. I hope you don't get pads that end up looking like that guy's on golfmk7. Be careful bedding them.
  16. The OE brakes are pretty good on the car for a daily. The only complaints I have are the amount of dust and the very high initial bite needs time to adjust to. 1) Upgrading discs will do nothing for daily driving, other than possibly increase the aesthetic if you like drills or slots. Very minor performance upgrade from possibly shaving a lb or 2 of unsprung weight. Rotors contain the heat from the brakes, and if you remove too much material (aka lower weight) they retain less heat effectively. Pads need to be chosen based on what is most important to you. For a daily, I'd imagine low dust and low noise are probably high on the list. Everyone has a different definition of spirited driving, but for low dust/noise Posi-Quiets are great. I also like StopTech street performance pads as a daily pad, but probably dust as much as OE pads. I'm sure there's plenty of good options others will post, I don't have much experience with low dust pads. 2) OE or OE type replacement blank rotors. I've used Zimmerman, who manufacture the OE rotor, or Centric (Parent company of StopTech) high carbons are great alternatives. I use blank rotors on track, and on some tracks they do fade a bit towards the end of the session, but if you're hitting those brake temps you shouldn't be on public roads. If you want the aesthetic, know that drilled tend to develop cracks earlier in their lifespan and slotted do tend to create more dust and wear brake pads a little quicker. 3) I use DS2500s as a dual purpose daily/track pad. They have low noise and can handle track temps, but do dust quite a bit. To me, they're overkill for a daily driver, but if you don't mind the cost, they're great pads. I've heard of too many horror stories of EBCs to try them. From cooking the pads following their break-in procedure, to crumbling pads on track. Again, just what I've heard, no actual experience with them.
  17. I should have worded it better. Poor launching, resulting in hot spots, burning, and glazing. I'm rarely in 5th on track, and am not going fast enough on public roads to be WOT in 5th vs downshifting to be in proper gear, so that could be one reason why my clutch is holding strong. Reports of slipping clutches seem to have a common theme of noticing during WOT in higher gears. If that's habitual, it can lead to faster wear on the clutch (although, a factory clutch should be able to hold that at stock power). Car had 8 miles when I picked it up at the dealership, so I'm pretty sure it has a factory clutch 😄. I also think what Spitz said has something to do with it too. My clutch delay valve was removed very early.
  18. FWIW, I have had a JB4 on my car for 18k miles (21k on car), including at least 7 track days. You can drive the car hard, just don't drive it stupid. Don't ride the clutch, don't launch the crap out of it, downshift instead of WOT at low RPM, and break it in correctly. Once you glaze the clutch abusing it once, it only gets worse from that point and it becomes a slippery slope. I was stupid and bought into the fear. Since I track the car and have increased power from the JB4, I expected the clutch to start slipping quickly. I've been sitting on a clutch for over 1.5 years waiting.... waiting.... Sorry, can't give input on what a good replacement is, since I'm still on stock
  19. I got the inspiration from this post to smoke the badge. Had a local wrap shop do it for $40.
  20. I also didn't like the chrome tips on my 7.5, so I ended up high-temp painting them and it looks good enough for me. The contrast of the piano black vs a matte exhaust tip isn't the best, but I prefer it much more than the chrome. https://photos.app.goo.gl/7D4ShjEeg7nB4QLv7 Yeah, there's some runs, it was my first time rattle canning anything. Since the 7.5 tips are welded on, I took the axle-back off to avoid any overspray.
  21. DarkArrow

    Facelift Mods

    nm, figured it out.
  22. Bump for any updates from people who have done this.
  23. I don't have OBD11 yet, but will get it eventually. Just picked up an '18 R, wondering if you can give input on the classic view. Does it do a pretty good job replicating the analog needles?
  24. Looks great. Only thing that sticks out to me, is the front R red looks to be a different shade than the tornado red. Maybe a little flatter and a little darker, and I think the OCD in me gets a little bothered. I agree with what was posted earlier, I think a satin or matte wheel would go best, in whichever color you choose.
×
×
  • Create New...