Jump to content

fly59

Junior Members
  • Posts

    33
  • Joined

  • Last visited

Personal Information

  • Name
    Matthew

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

fly59's Achievements

Advanced Member

Advanced Member (3/9)

38

Reputation

  1. If anyone else is having an issue with the peeling button and doesn’t want to fork out £50/60 for a whole genuine Vw unit. I bought one from Chinese Ebay for £3.39 posted. The switch didn’t work at all but I did manage to swap over the plastic caps pretty easy so it looks nice and the electronics are all genuine. https://www.ebay.co.uk/itm/193527270103
  2. If anyone else is having an issue with the peeling button and doesn’t want to fork out £50/60 for a whole genuine Vw unit. I bought one from Chinese Ebay for £3.39 posted. The switch didn’t work at all but I did manage to swap over the plastic caps pretty easy so it looks nice and the electronics are all genuine. https://www.ebay.co.uk/itm/193527270103
  3. All sorted. 👍 I took the vehicle into the stealers for a service a few weeks back, and at the time asked them to have a look if they could fix the Range error. They did. I assume they updated the software on my original CAN but was hard to get any technical info from the barrage of salesmen you are allowed to talk to. At the same time they managed to wipe the Maps, Apple CarPlay and the voice control. Today I went back to see Alex who reinstated all these functions for me. Top guy who wanted no money for an hours work to fix what VW had broken! Thanks 🙏 So it it can be done, without expensive ‘hacked’ units and a little perseverance. Good luck to others. It’s worth it!
  4. Great news! Can you post the fix in this thread? I’m sure others would like to know too
  5. Thanks CX. But before I take a leap of faith for a $250 unit from China.. do you have any links to the French forums which state the problem was resolved? Also, any buying links which are cheaper & reliable?
  6. Pressed Alu plates look great! make sure you go for the Hydraulic Press ones and not the Manual Press. I had some cheap eBay ones first and the letters came off with a jet wash.🤣 The ones i have from http://www.autostyle-plates.com/ have been on over a year and still clean up as good as new.
  7. Hi All, Just as a follow up on this original issue. Today my car went into the local dealers for an oil service so i thought i'd let them have a go at solving my problem. Long story short they couldnt either solve the problem. So i had to choose between the driving modes working or getting rid of the Error: Range Calc. For now I've accepted the Error on screen to keep the profiles working. Ive tried contacting Jack Kirry to see if he fancys having a go
  8. I read that upgrading the software to AJ revision fixed it but I don’t have anyone who can do the software upgrade so I went ahead and bought a newer CAN Gateway off a breakers. I think the one I’ve got in now is AM and no range error but no Driving Profiles either (yet)
  9. Thanks . I’m booked in at the local stealers for an oil change in January and have asked them to have a look at it. Fingers crossed they’ll have a go I know what they’re like with any mods even OEM
  10. Things sure do escalate quickly on here... Alex is a nice guy he fit me in numerous times to try and resolve this and to be honest I have had enough too of banging heads against the same brick wall. At the end of the day he did what I paid him to do with no guarantee. @Legoless I agree with you to an extent about the complexities of retrofits but there are at least two carbon copy’s of my problem on the Ross-tech with proven solutions so I’m not giving up that easily. If I went and bought a new car, where’s the challenge in that?
  11. MY2014 with all bells and whistles except the front camera for lane tracking etc.
  12. Unfortunately, even after 4 different CAN Gateways and 5 trips to see Alex, I still seem to have to choose between having the Driving Profiles working or the Range calc Error on the screen. There is info on the Ross Tech forums that its a FeC issue, as the code for the Driving profile is stored in the Can GW, but Alex doesnt agree and has had enough of me. Someone else with the same issue updated the software on the module (AJ revision) - i guess this keeps the FeC? Another replaced the GW and then had the codes restored at a stealer. Both solved it so im confident there's a solution out there. I'll have to go and see a dealer or someone else with ODIS to give it another go. Not giving up just yet!
  13. Thanks Dr! I like the look of that website, could easily spend a lot of money on there 🤯 €800 for the lights and adapters, that’s quite a steal.
×
×
  • Create New...