Jump to content

jaysback

Junior Members
  • Posts

    35
  • Joined

  • Last visited

Everything posted by jaysback

  1. Quick mask up of the tailgate and tried the spoiler on for size. Going to be a bit of work to get it right as you can see. Not going to be simple but I'm hopeful we can do something with it.
  2. Agreed, holidays always require a full clean down. It's a waiting game. Lol
  3. Another delivery today this one from China and a AliExpress special. Going to need a fair bit of tidying up and not sure how it sits on the car as yet. Looking forward to getting it colour coded and fitted.
  4. Thought I better give it a bit of a clean on the interior. I still hate doing it and the carpet in the Golf is a dirt magnet. But it does look a load better inside for it. Thanks for the nudge I needed to do it.
  5. So my replacement lamps turned up. Osram cool blue boost H7 for the cornering lights and a pair of Osram LED W21W for the rear indicators. Happy to say the indicators are working perfectly with no warnings or fast flashing. Nice crisp light and seeing them side by side you can see how much better the response time on them is. And as bonus no more fried egg rear lights. while the light was out gave it a nice clean up and some wax.
  6. Paint pops and so does the exhaust now. Sounds a lot better, more like a Golf R should. Jobs still to do :- Get the racing line springs on. JB4 to fit. Racing line stripe for the doors to source. Spoiler should be here soon, get it colour coded and fitted. Mirror caps colour coded. Roof rails and front bumper de chromed. Edit:- Just ordered a pair of Osram cool blue boost h7 for the cornering lights and a pair of Osram W21W amber led's for the rear lights to get rid of the fried egg look. Hopefully the LEDs wont give me a load of hassle, but we shall see.
  7. Following on from the ehaust going on, I wasn't happy with the state of the tailpipes on there. IMG_20210718_121151 by Jason Oldland, on Flickr With a fair bit of elbow grease, a drill, 3M fast cut and cotton buffing balls they came up a treat. There is some pitting on them but nothing I can do about that. IMG_20210719_092323 by Jason Oldland, on Flickr Thought I better give the whole thing a clean after that, car was letting the tailpipes down IMG_20210719_091948 by Jason Oldland, on Flickr IMG_20210719_092226 by Jason Oldland, on Flickr
  8. Great job on the bonnet, will be bang on when finished. Liking the front bumper flares, want a set for my mk7, MTM ones are way out of my price range though. Anyone know an alternative?
  9. It's a resonated Remus with the remote valves on. Got lucky and managed to pick it up second hand. Just a cat back at the moment. Also just ordered a rear spoiler for it. Wheels weren't my first choice but they are growing on me and the gunmetal colour is spot on. Looking to get a Racingline stripe in the same colour.
  10. So yesterday I spent a few hours getting the exhaust fitted to the car. Not the easiest task in the world under the car on the drive with just a jack and axle stands but it's on. Will need a bit of tweaking when it goes up in the air next just to get the tailpipes aligned fully. No leaks, no knocking and valves are working fine. Need to do some polishing on the tailpipes to get them back up to a decent standard but overall happy with it. Oh! It now sounds like a Golf R should. IMG_20210713_113649 by Jason Oldland, on Flickr IMG_20210713_161057 by Jason Oldland, on Flickr
  11. Glad to hear they are all good. I pulled the trigger on a used set of R360 in the end. Not as nice to look at as yours though. Would you mind giving me any tips on the spoiler at all. I'm looking for something that's not a Maxton. Which is obviously nothing.
  12. Stunning car, your mods are exactly what I have been looking at with my estate. Couple of questions. How are the wheels holding up, I almost ordered these but have found out they have just been discontinued and I was concerned about replacing them if I had any damage. Do you have any close ups of the fitment of the spoiler fitment at all?
  13. I have to say interiors arent my thing at all. gets a vacuum and a dust of every now and then and if there is a show I will do it for that. Sausage roll crumbs all over the place atm, I dont normally eat or drink in my cars - 4hr round trip for the wheels changed that.
  14. Here you go bud. Stuck them on today when it was back from it's service. now I'm thinking I need some nice little mud guards.
  15. So little update now it's in my ownership. Made a few purchases so far. R600 intake, elbow and CLP turbo inlet - all now fitted. Waiting to fit. JB4 with bluetooth, Remus resonated and valved system, Racingline springs and today I picked some Racingline R360 wheels up. Tomorrow it's in to one of our local VW specialists (VGS in Swindon) for a full service. IMG_20210706_171346 by Jason Oldland, on Flickr IMG_20210706_201729 by Jason Oldland, on Flickr IMG_20210706_202830 by Jason Oldland, on Flickr
  16. So little update now it's in my ownership. Made a few purchases so far. R600 intake, elbow and CLP turbo inlet - all now fitted. Waiting to fit. JB4 with bluetooth. Remus resonated and valved system. and Racingline springs. Hopefully I will have some Racingline R360 wheels by the end of the day to.
  17. After a year of ownership my wife has now moved on to a Mazda CX5, I have sold my Focus ST estate and now the Golf is mine. Had a bit of a spend up on it. Now has an R600 intake fitted, Remus valved cat back to go on, and a JB4 to fit also. Looking to lower either with some springs or maybe go coilovers. Will be looking for second hand hopefully as ultimate goal is a b9 S4.
  18. Little update. Custom Covers tailored boot liner fitted. Travall dog guard and rubber boot mat also fitted. Couldn't stand the yellow reverse lights so Osram LEDs have now replaced them. Car has been spot on, no issues what so ever. Like it a lot.
  19. Out of interest what product did you use? I want to do this one at some point. I have used Carbon Collectives Platinum on a white Leon. Hated applying it, but the guy was well happy well after a year later.
  20. PS, this was prior to the rest of the car getting it's correction. Still has all the marring on there from the previous owner and claying.
  21. Managed to correct the scrape on the front bumper. 1200, 1500, 2000 then 3m fast cut followed by fine cut. Jayswax extreme professional wax doing it for protection and beading.
  22. That must of been a manic rush of a day. Good work getting it done in that time.
  23. They do the job well. I had a cheap eBay one for years but it took ages to put up these are a doodle, even on your own.
  24. Good spot, I have a Rock awnings Explorer 3m x 6m. Great bit of kit.
  25. Made a start on the correction yesterday. Hoping to finish it off today, but it's way hot. 1st stage done and a couple of panels have had 2nd stage. Took it easy with the weather being what it is. Think it will be much the same story today. Meant to be even hotter today so progress may be even slower.
×
×
  • Create New...