Jump to content

Disable Stop/Start (OBDeleven Coding)


Booth11

Recommended Posts

  • 3 weeks later...

Won't that causes issues though?

Sent from my iPhone using Tapatalk

No, there are certain target conditions the car needs to achieve for stop-start to function, battery voltage and coolant temp are the 2 ways you can disable stop-start with VCDS by changing the target conditions to something the car won't see, so drop voltage to say 11v or temperature to say 150c.

 

Those targets won't alter how the car runs or affect the voltage or temperature, they are just values the car won't see and therefore it won't auto stop-start.

Link to comment
Share on other sites

  • 2 months later...

It appears I have to use the other method mentioned (coolant temp) as I'm unable to deactivate it Start/stop as mentioned via the OP method on my 64 plate......any ideas where to look for the coolant temp method?

Link to comment
Share on other sites

3 hours ago, MC71 said:

It appears I have to use the other method mentioned (coolant temp) as I'm unable to deactivate it Start/stop as mentioned via the OP method on my 64 plate......any ideas where to look for the coolant temp method?

Strange

 

voltage method works fine on my 64 plate

 

registered oct 14

Link to comment
Share on other sites

5 minutes ago, 1534walla said:

Strange

 

voltage method works fine on my 64 plate

 

registered oct 14

 

I'll keep trying, maybe one of those things that'll take a few goes to work on my car but already tried half a dozen times. 

 

Link to comment
Share on other sites

  • 1 month later...
52 minutes ago, dj219957 said:

it will says its not available when you are stopped yes. best mod ive done was to turn that crap off.

 

OK, cool.  Hadnt noticed it when moving and that's why :P

Dave

Link to comment
Share on other sites

  • 2 weeks later...
  • 7 months later...
26 minutes ago, kopiter said:

 

Has anyone tried to revert this to Enabled by setting the value back to the default?  I've just tried it and get something like "(31) Function not working" in the green bar at the bottom of the app - help!?

 

 

I’ve reverted it back by putting the voltage setting back to 7.6v when it had to go in to have a new battery fitted. Had no issue putting it back to default.  This was only a few weeks ago. 

Link to comment
Share on other sites

1 minute ago, kopiter said:

 

Did you set the value to "7.6" or "7.6 V"?

 

I think just 7.6 iirc.  After the new battery was fitted I’ve again switched it back now to 12 as I can’t tolerate Stop Start at all.  I don’t remember adding a V.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...