dan Posted July 21, 2017 Author Report Share Posted July 21, 2017 29 minutes ago, nige bcs said: PM'd guys - thank you Nige Cheers Quote Link to comment Share on other sites More sharing options...
dan Posted July 21, 2017 Author Report Share Posted July 21, 2017 Love those black tip option - would be Impossible to choose between them Quote Link to comment Share on other sites More sharing options...
nige bcs Posted July 21, 2017 Report Share Posted July 21, 2017 Yes very difficult Dan... Quote Link to comment Share on other sites More sharing options...
dan Posted July 24, 2017 Author Report Share Posted July 24, 2017 On 7/21/2017 at 12:37, Superbiker said: In fairness there can be no justification in a full system to me, I can get exactly the same noise/power improvement from a 3" decat downpipe that connects to standard backbox that costs £300 rather then spending upwards of 2k for a full system. And let's face it you can spend all the money in the world on an exhaust but a 4pot engine is always going to be a 4pot, and sound accordingly. And frankly yes a down pipe is all you need for stage 2, Your car won't need an MOT for years so why bother paying for a CAT. All it does is restrict your exhaust gasses from blasting out the back. Simple rule for going faster: The faster you can get cold air + fuel into the cylinders. And the resulting exhaust gasses out the rear end (via the exhaust) the faster your going to be going. Any Catalysts in the way no matter what cell it is, is going then be more restrictive than a Straight through pipe. Fair enough, it's an interesting argument. For me regardless of restrictive properties i'll have a cat on the car... It's not a cheap car so feels better to do things properly IMO for road use. nige bcs and Mitch 2 Quote Link to comment Share on other sites More sharing options...
nige bcs Posted July 25, 2017 Report Share Posted July 25, 2017 The oversized 200 cell cat that we use is good to 500 bhp... lots of maths and physics applied to ensure this for you... For applications demanding greater than this we move to the 140.0 mm Mega cat Cheers Nige Quote Link to comment Share on other sites More sharing options...
roberth Posted July 30, 2017 Report Share Posted July 30, 2017 After running around with an ECS resonator delete for the last 5 months, I have taken the plunge and had fitted, this Milltek catback valved resonated system with GT100 polished round tips. Although the resonator delete made all the right noises I wasn't really 100% happy with it. Glad I made the change as the Milltek sounds really good, even with the resonator, and so it should as it was quite expensive. Went with the round tips as I think they look more purposeful. dazie00, Ben1191, SidewindeRj and 2 others 1 4 Quote Link to comment Share on other sites More sharing options...
Msportman Posted July 30, 2017 Report Share Posted July 30, 2017 On 19 July 2017 at 20:42, dan said: It's a tough one. I love and want all hell to break loose when giving it some. I'm happy with a more prominent tone on motorway cruise but wouldn't want it excessive as getting old! ( I think that's why i ended up milltek on a previous car but that was an old 1.8T so not comparable). Anyone on here with something Milltek (or maybe Powervalve? or i'm open to other suggestions) in Cambridgeshire / East Anglia ish that wouldn't mind me having a listen? ... I feel crap youtube videos will be misleading. It's a big investment for these systems. I'd kick myself if i got it wrong! Separate question - I'm looking to go stage2 with a custom map, would a downpipe+cat and mid resonator delete on stock system achieve the same thing? . I didn't want any drone so when I went stage 2 recently I had the APR DP and sports CAT fitted to the stock exhaust. It's gives the car a nice but small increase in noise but in Race mode it pops and gurgles just to the right amount. Still very quiet on the motorway in usual driving modes when the family are in the car. I already have a droning track car so want piece and quiet under normal driving but if I want more I just change driving modes and it's a really nice set up. holdk2 1 Quote Link to comment Share on other sites More sharing options...
holdk2 Posted August 1, 2017 Report Share Posted August 1, 2017 These look really good Quote Link to comment Share on other sites More sharing options...
Ben1191 Posted August 1, 2017 Report Share Posted August 1, 2017 On 30/07/2017 at 23:38, roberth said: After running around with an ECS resonator delete for the last 5 months, I have taken the plunge and had fitted, this Milltek catback valved resonated system with GT100 polished round tips. Although the resonator delete made all the right noises I wasn't really 100% happy with it. Glad I made the change as the Milltek sounds really good, even with the resonator, and so it should as it was quite expensive. Went with the round tips as I think they look more purposeful. Look amazing.. Making me just bite the bullet and get a new system rather than waiting for a used one Quote Link to comment Share on other sites More sharing options...
roberth Posted August 1, 2017 Report Share Posted August 1, 2017 1 minute ago, Ben1191 said: Look amazing.. Making me just bite the bullet and get a new system rather than waiting for a used one Thanks Ben, go for it, you could be waiting forever !! Quote Link to comment Share on other sites More sharing options...
Ben1191 Posted August 1, 2017 Report Share Posted August 1, 2017 Just now, roberth said: Thanks Ben, go for it, you could be waiting forever !! Theres a guy near silverstone with backbox but wants 700,dunno if thats a good or bad price. Quote Link to comment Share on other sites More sharing options...
roberth Posted August 1, 2017 Report Share Posted August 1, 2017 2 minutes ago, Ben1191 said: Theres a guy near silverstone with backbox but wants 700,dunno if thats a good or bad price. What make,Is it valved and what tips ? Quote Link to comment Share on other sites More sharing options...
Ben1191 Posted August 1, 2017 Report Share Posted August 1, 2017 Milltek non res and valved with polished tips,exactly what i want. He doesnt have the non res pipe because he left it on his car. Quote Link to comment Share on other sites More sharing options...
roberth Posted August 1, 2017 Report Share Posted August 1, 2017 10 minutes ago, Ben1191 said: Milltek non res and valved with polished tips,exactly what i want. He doesnt have the non res pipe because he left it on his car. Half price of this new one, http://www.ebay.co.uk/itm/Milltek-SSXVW403-Golf-R-MK7-Cat-Back-Exhaust-System-Valved-Non-Res-Polish-Round-/232349976959?epid=2135201215&hash=item361923497f:g:X8wAAOSwax5YyqWN Ben1191 1 Quote Link to comment Share on other sites More sharing options...
Ben1191 Posted August 1, 2017 Report Share Posted August 1, 2017 3 minutes ago, roberth said: Half price of this new one, http://www.ebay.co.uk/itm/Milltek-SSXVW403-Golf-R-MK7-Cat-Back-Exhaust-System-Valved-Non-Res-Polish-Round-/232349976959?epid=2135201215&hash=item361923497f:g:X8wAAOSwax5YyqWN Yeah,any idea how much it would cost for fitting? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.