Jump to content

Pulsing start button


marshy

Recommended Posts

I was curious to see if this would work on a mk7.  Tried it and doesn’t work on mine (which is what I expected might be the case).  I guess I’ll just have to live without the pulsing until mk8 turns up.   

Should work as it works on the wife’s 65 plate GTD!


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

31 minutes ago, marshy said:


Should work as it works on the wife’s 65 plate GTD!


Sent from my iPhone using Tapatalk


Hmm that’s a bit weird then. I tried it twice as per the coding you posted but and it accepted the changes just didn’t physically change anything, still had the start button lit up solid.  Will give it another go tomorrow.  I’m not bothered as new car coming in a month (I hope) but was just interested to see if it worked as I think the new owner might like it activated.  

Link to comment
Share on other sites


Hmm that’s a bit weird then. I tried it twice as per the coding you posted but and it accepted the changes just didn’t physically change anything, still had the start button lit up solid.  Will give it another go tomorrow.  I’m not bothered as new car coming in a month (I hope) but was just interested to see if it worked as I think the new owner might like it activated.  

It works on our GTD too....


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Checked my coding for VCDS and it’s same as Kev’s
Go to the KESSY module Acc/Start Auth. @ address hex05
Select Security Access
Enter the magic number 20103
Select Adaptation
Change the channels below to active
ENG123036-ENG154826-DeveloperCoding: Search lights-ZAT_illumination_concept_mybeat_clamp58xt
ENG123036-ENG154827-DeveloperCoding: Search lights-ZAT_illumination_modus_mybeat_clamp58xt


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

15 minutes ago, veneeringman said:


Strange, I’ve coded a few different vag range cars with it now and it’s always worked.
Did you cycle the ignition off then on ?


Sent from my iPhone using Tapatalk


I did both times - ignition off then on but no change, letting car shut fully down in between.  I tried doing the coding first with engine running but when didn’t work, I then tried with ignition on but engine not running, still nothing.  I’ve no doubts it’s user error if it’s worked in yours and Marshys . :D  My connection to the house wifi was being a bit temperamental and that was after I’d unplugged my Carlink2 dongle as the phone kept picking that up at first :rolleyes: but it did connect and accept the changes. Ah well, tomorrow is another day, another date with the dongle.  😂

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...