Jump to content

CZR

Junior Members
  • Posts

    33
  • Joined

  • Last visited

Everything posted by CZR

  1. Of course it's possible. There's an increasing number of DQ500 swaps lately and that one is more complicated to achieve than DQ381 (which should be *almost* plug&play)
  2. This gave me the courage to order a kit too. One question tough, did you have any sort of white plastic rings mounted under the rear springs ? Or did they fit the OEM rubber mounts ? The manuals and package list mention 2 pieces of plastic rings (same as the old version for Mk6 I suppose) but I didn't receive any. Mounting pictures don't show them either. Later edit: Just found out that there are two kits for Mk7 GTI (VWS MP20 and VWS MP21) ... with different contents. I have the MP20 version but that still doesn't explain the missing plastic rings This is everything I have. Going to install next Friday
  3. I had the ttrs + Prets on 10mm and then went to 12mm. They cleared on 10mm but was too close for my taste Neuspeed RSe10 fits without spacers.
  4. That's only on the DSG version. The manual still gets 380Nm
  5. He's still working on it (had some issues) and, anyway, MRC is unavailable this month. I drove it with a temporary flash at an estimated 500PS and it's a beast! He will post an update once it's done
  6. Regarding the throttle: you can choose a tuner that modifies it (ex: MRC) or use a pedal box - flashing gives better results. P.S: you can try PS4 instead of PSS (pilot super sport)
  7. I believe that by ohlin you mean Ohlins, by millet you mean Milltek and ... K04 what ? K04 was on previous Golfs, not 7. Both GTI and R have new turbos now.
  8. Yes. I bought the S3 subframe (stiffer, lighter - aluminium) and it uses the same dogbone but with different bushing. Same applies to lower control arms from TTS 8S (stiffer and lighter with stiffer bushings). Bushings from TT/TTS 8S are also present on Clubsport S
  9. KW DDC is NOT for track use. That's why I think we are left with B16/B16 Damptronic or Ohlins. On the other hand, if you talk to them, please ask if their plug&play (damptronic) kit is an active system like the OEM DCC is (adjusting dampeners based on various sensors) or is it just using preconfigured profiles selectable from Driving Mode menu. I emailed them a couple of weeks ago but no response. @NeilP: How are those Pagid pads holding up ? Any squealing yet ? Planning to go on RS29 route but I definitely don't want lots of squealing. Tarox Corsa could be a good all-rounder ? Or DS2500 (which wear very fast) ?
  10. Sorry for posting here but can't send PMs @Msportman, @NeilP: Any info on B16 Damptronic ? I'm on DCC so trying to keep this wonderful feature. Yes, I do track my car on ocasion.
  11. I was thinking about the lower engine-mount ONLY. Didn't read reviews about it on Mk7 yet Until I make up my mind between VWR and HPA's dogbone, I'll stick with the current S3 mount
  12. Made the assumption based on the sound. Didn't pay much attention to the rpm needle If it's not happening on even roads then it's ok.
  13. CZR

    My golf

    What revision are the spark plugs ? G or M ?
  14. Seems to me your clutch is slipping. Any DSG tune yet ? Stock tune won't take so much torque.
  15. *closed* due to lack of interest
×
×
  • Create New...