Shaaz7R300
Junior Members-
Posts
38 -
Joined
-
Last visited
Personal Information
-
Name
Shaz
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
Shaaz7R300's Achievements
Advanced Member (3/9)
15
Reputation
-
I’d avoid any type of race/track pad (ebc yellow stuff) as they take time to heat and don’t have very good cold bite. The red stuff versions are a more road focused version which bite harder than stock with slightly worse cold bite than stock. But I think the stock pads and discs are great for a stage 1 car, I’d wear down your pads and then replace them with red stuff, along with some good quality brake fluid which would be my recommendation.
-
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Anyone in the UK or anywhere for that matter have successfully used the JB4 with the BMS meth injection kit on these engines ? These seem to be common for BMW cars but the AEM kit seems to be more popular for the 2L ea888 engine. Am thinking of going down the WMI route and would be nice to have the integration of the existing JB4 than buying a whole new system. -
Yeah I’m guessing they think they can try and fool some people into taking more money than is needed, going to contact some more dealers but they seem hard to find which are local to me. So many Revo/Apr dealers near me but Apr don’t offer a stage 3 turbo and I’m not a fan at the moment with the Revo is38etr v2 by looking at the torque/power curve.
-
Currently have a the vwr600 intake with their intake pipe, Revo chargepipe kit, Wagner intercooler, scorpion sport cat downpipe, So the only non Racingline part is the intercooler as Racingline don’t offer a chargepipe kit like the Revo kit or a downpipe which they recommend to be a scorpion one anyway. . Even went on the Racingline website and cut out a quote which even says Racingline parts are not required to use their turbo as long the parts are of a high quality which the intercooler is. Sent to them this via email and they haven’t responded back.
-
@Batch What supporting mods are you running with the stage 3 Racingline turbo ? Got in touch with a Racingline dealer who told me I had to swap out my Wagner intercooler, and other stuff for Racingline ones if I wanted to go down the Racingline turbo route.
-
Can it really be that much of a difference ? I did the rollIng starts from 20mph. I’ll give it a go again from a dig. cheers
-
Stock 100-200kmh time vs JB4 map 6. a bit disappointed was hoping it would be in the low 9’s given it’s almost stage 2 hardware (r600 intake + revo sports dp). Still feels very rapid.
-
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Thanks George. I’ll get some images and send them via email. -
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Hi, The obd cable was run via the pedals but in a high temp heat sleeve So I thought that might be the issue but I got a replacement New cable and run it via passenger side and into the battery side bulkhead but still get the same issue. I’m running JB4_EA888_8_6_T3 firmware which is the correct for my engine as the car is a 2016 model. if it was to be a obd cable issue then surely it wouldn’t work at all ? When this error happens I can still connect to the JB4 using the app but it shows no rpm or any details and when I read codes it comes up with invalid read error. But once the car has been switched off for 5/10mins and then restarted the JB4 works perfectly fine. Could there be a faulty within the JB4 board itself ? -
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Hi George, I’m having issues where the JB4 doesn’t seem to power back up after it’s been switched off / the car has switched off momentary e.g. When stopping for fuel fill up or a quick pop into a shop. The car has to fully shut off and be left off for about 5-10 mins and then turned on for the jb4 to become active. I’ve had the JB4 since the day of release (upgraded from the jb1) and been running flawlessly with only this issue happening recently. any help with this please ? -
Has7rr reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Jon R306 reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Had a run with a 16plate c63 amg Saloon (non-s) model on the weekend, I knew it would have been a good run as it wasn’t the s version. And it what such a good run, neck and neck from 30-1**mph. The merc was maybe edging it by 1/4- half a car length on the top end. If only I had caught the reaction of the drivers face 😂😂. -
Mitch reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
1-ft roll out is mainly used for 1/4time drag racing. Where you stage up 1ft before the timing beacon. So essentially the first 1ft isn’t used to calculate the time this can reduce the time by 0.2/0.3 on some occasion. Many people/car magazines who quote 0-60 times will try to give the value with 1ft roll out on. Making the time appear quicker as it’s more like a 3-60mph rather than a true 0-60mph. -
Shaaz7R300 reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Shaaz7R300 reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Shaaz7R300 reacted to a post in a topic:
Burger Tuning JB4 information thread
-
Chris3King reacted to a post in a topic:
DQ381 swap
-
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
Will do that tomorrow morning. Thanks -
Burger Tuning JB4 information thread
Shaaz7R300 replied to george@BMS's topic in Modifying your Golf R MK7
George, I’m having issues with the JB4 app. I switched over to a new phone today. The app was working fine at first - it all connected and worked as it should. A few hours later I tried to connect and it doesn’t work. A little pop up message comes up saying ‘finding ble device’ for about half a sec then goes away and won’t connect. Reinstalled the app still the same issue. Any help would be appreciated. -
Anyone have any videos of what a decat, with res delete might sound like by any chance ?