Jump to content

VW17GLF

Members
  • Posts

    114
  • Joined

  • Last visited

Everything posted by VW17GLF

  1. HI Mate, was running 15mm spacers front and 20mm spacers on the rear. Don't have any photos now unfortunately as I have taken the spacers off.
  2. I've got VWR Revision Set 3 and they are great. Great stance and don't rub if running spacers. At least on my 18" Cadiz wheels. 15mm front and 20mm on rear
  3. Ask Nige and he'll be able to sort out a resonated section for it? Can just swap them on/off very easily?
  4. Got EBC Yellow Stuff in mine, great stopping power in them
  5. As the title suggests, I am after a little help as regards to meth injection. I'm wanting to install it onto my car but haven't got a clue what to do. Any help would be appreciated. This is the first time if looked into it and haven't got a clue about anything
  6. Personally I'd wait until 1000+ miles so everything has bedded in.
  7. Hi all, Wondering if anyone can help and shed a little bit of light on my dilemma. I currently have a BCS Powervalve full system but I only want the boost actuated valve to work when in Race / S mode. I have bought a solenoid that will do the job, just unsure of where to take the electrical feed from that will active the valve when Race / S mode is activated? Hope this makes sense and would be grateful for any advice. Thank you
  8. You can send them your own turbo and they do a supercore which just upgrades your turbo to make it more reliable and it can make more power. Ask Dan at Littco, he's your man
  9. Nice motor Tom, nice to have another forum member from Derbyshire!
  10. I think Littco do a supercore called the L380X I think for the standard IS38 which makes power up to around 420hp but retains the same stock spool and power all the way to the redline. Dan from Littco is your man to get in contact with or even @Rick@UnicornMotorDev
  11. Stage 3 for me, Littco L500 with all supporting mods running 512hp. Stock was fast enough but I can't help but modify. Stage 3 is now definitely more than fast enough!
  12. I suppose with it being a bigger turbo it isn't in use at full power when driving normally compared to stage 1/2 or even standard. Yeah it does get a thrashing sometimes which gets it over 100 degrees which is always good. Hmm, never in ECO, always in Race ready for the next send!
  13. Got MPM oil in, but will be doing an oil change next weekend to VWs own oil. No additional oil cooling kits added, plus I am running at Stage 3 also.
  14. Mine tends to sit around 95-98 degrees under normal driving, however when driving hard it's anywhere from 102 - 112 degrees but quickly comes back down again when driving normally.
  15. Mine does change down gears itself on downhill braking. I doesn't do it if you brake steady but if you press the brakes more firmly going down the hill it does change down for you.
  16. I think the turbo adds a lot of power onto the golf. I remember on mine when I had an actuator fault on my turbo and it was open until you got to around 4-5k it was like a slug getting up to speed felt like a 1.6 golf getting there. Turbos are definitely needed!
  17. Yeah very true, I just hate having to go down a couple of gears to pull better but thats what you get when you put on a bigger turbo. I do miss the stock low down grunt.
  18. It's an absolute beast to drive. Does have a fair bit of lag if you are in a high gear and the turbo isn't fully spooled but in a lower gear and correct RPM it just pulls and pulls! Very fast!
  19. This is mine from Unicorn which I am very pleased with! MK7 Golf R
  20. Might sound a bit thick but what exactly does the 1st gear deactivation do? surely you need 1st to pull off better normally without causing extra wear and slip?
  21. 2.1 bar Stage 3 Unicorn on the L500 Turbo from Littco - 512bhp
  22. Sounds like mine did just blew the turbo let go! I’d get it looked at if I was you, Littco do an upgrade kit for the standard turbo which I would recommend over stock power as the standard turbos are pretty awful to be fair. another thing to check would be the sensor at the top of the engine towards the back end where the air intake goes into the turbo. Mines popped off a couple of times and the turbo made a fluttering sound until I plugged that back in. Not sure what the sensor actually is though? Sent from my iPhone using Tapatalk
×
×
  • Create New...