Jump to content

OBD Eleven


discolegend73

Recommended Posts

Genius just got mine today the best money I ever spent.

 

What mods have people that have this performed and what do they do?

 

My car came up with 3 faults on scan which I cleared with the device not sure if this is the right thing to do.

 

Anyway 1st one was to turn the artificial sound down I went for 60% as a starter because I like some of the sound but at a lower level.

 

I have to admit looking at some of the menus there's some serious stuff that you would never understand unless you were a technician.

 

I may go for flaps always open next ooh er but as you can have these open in individual mode now by selecting engine in sport I may not need to.

 

Brilliant device tho highly recommend

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Genius just got mine today the best money I ever spent.

 

What mods have people that have this performed and what do they do?

 

My car came up with 3 faults on scan which I cleared with the device not sure if this is the right thing to do.

 

Anyway 1st one was to turn the artificial sound down I went for 60% as a starter because I like some of the sound but at a lower level.

 

I have to admit looking at some of the menus there's some serious stuff that you would never understand unless you were a technician.

 

I may go for flaps always open next ooh er but as you can have these open in individual mode now by selecting engine in sport I may not need to.

 

Brilliant device tho highly recommend

 

 

Sent from my iPad using Tapatalk

 

This may help :afro:

http://www.vwroc.com/forums/topic/17466-obd-eleven-the-basics/

Link to comment
Share on other sites

Genius just got mine today the best money I ever spent.

 

What mods have people that have this performed and what do they do?

 

My car came up with 3 faults on scan which I cleared with the device not sure if this is the right thing to do.

 

Anyway 1st one was to turn the artificial sound down I went for 60% as a starter because I like some of the sound but at a lower level.

 

I have to admit looking at some of the menus there's some serious stuff that you would never understand unless you were a technician.

 

I may go for flaps always open next ooh er but as you can have these open in individual mode now by selecting engine in sport I may not need to.

 

Brilliant device tho highly recommend

 

 

Sent from my iPad using Tapatalk

 

Great bit of kit.  Money very well spent.  

 

So far, I've done 

Chirp on lock/unlock - long coded

Stop/start disable - long coded

Headlamp washers off - long coded 

Enable fan level display on auto - app

Reverse lights full brightness - long coding

DRL 100% with headlights - long coding

Full brake lights - long coding

 

Still to do:

Coming home lights long coding

 

and maybe a few other things. 

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Great bit of kit. Money very well spent.

 

So far, I've done

Chirp on lock/unlock - long coded

Stop/start disable - long coded

Headlamp washers off - long coded

Enable fan level display on auto - app

Reverse lights full brightness - long coding

DRL 100% with headlights - long coding

Full brake lights - long coding

 

Still to do:

Coming home lights long coding

 

and maybe a few other things.

 

 

Sent from my iPad using Tapatalk

Right where did you find the coding for these ?

 

What are full brake lights ?

 

Cheers

Matt

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Right where did you find the coding for these ?

 

What are full brake lights ?

 

Cheers

Matt

 

 

Sent from my iPad using Tapatalk

Full brake lights are activating the inner tailgate portion (in addition to the standard outer lights) to come on as brake lights.

 

I found coding from a variety of places, OBDeleven forum, this forum and from hunting around. Here's a few bits of coding for some of the things I've done.

 

Deactivate headlight washers

Select Central Electrics
Select Coding
Scroll down the very long list until you find Scheinwerferreinigungslage(
Change to not installed -
Press the "tick-button" to enable the change
The headlight washer should be disabled

 

Disable stop/start

Select Control unit 19

Adaptation

Stop start limit voltage

Value=12

 

Alarm chirp on lock / unlock 

Go into [09] Central Electronics

Go into Security Access and enter 31347

Adaptation channels, and you are looking for:

(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (un-lock acoustic feedback)

(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (lock acoustic feedback)

Set one or both to on if you wish.

Then set the following to "on"

 

(7)-Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)

This enables a menu setting in the "car" settings, "Locking" menu of the infotainment screen to set alarm chirp on or off when locking /unlocking the car and have the option to switch it on or off from the head unit.

 

Carbon centre console 

Select control 17

Adaptation

Display depiction

Value option 2

 

Inner brake lights (full brake lights)

Module 09 (Central Electrics)

Security Access 16 

Code = 31347

Adaptation 10

Channel (8)-Leuchte27 NSL RC6

Lichtfunktion C27

Set to brake light = Bremslicht (default is not active)

- To increase brightness

Channel (10)-Leuchte27 NSL RC6

Dimming CD27

Set to 100 (default is 0)

 

‪Reverse lights - increase brightness      

9- Central Electrics

16-security code 31347

10-Adaptations

(6) Leuchte 28RFL LC11 dimming AB 28

(6) Leuchte 29RFL RA64 dimming AB 29

Adjust values to what you want. 100%

 

Drls to 100% (with headlights on)

5f2f25829392081f04059acb30213d60.jpg

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Full brake lights are activating the inner tailgate portion (in addition to the standard outer lights) to come on as brake lights.

 

I found coding from a variety of places, OBDeleven forum, this forum and from hunting around. Here's a few bits of coding for some of the things I've done.

 

Deactivate headlight washers

Select Central Electrics

Select Coding

Scroll down the very long list until you find Scheinwerferreinigungslage(

Change to not installed -

Press the "tick-button" to enable the change

The headlight washer should be disabled

 

Disable stop/start

Select Control unit 19

Adaptation

Stop start limit voltage

Value=12

 

Alarm chirp on lock / unlock

Go into [09] Central Electronics

Go into Security Access and enter 31347

Adaptation channels, and you are looking for:

(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (un-lock acoustic feedback)

(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (lock acoustic feedback)

Set one or both to on if you wish.

Then set the following to "on"

 

(7)-Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)

This enables a menu setting in the "car" settings, "Locking" menu of the infotainment screen to set alarm chirp on or off when locking /unlocking the car and have the option to switch it on or off from the head unit.

 

Carbon centre console

Select control 17

Adaptation

Display depiction

Value option 2

 

Inner brake lights (full brake lights)

Module 09 (Central Electrics)

Security Access 16

Code = 31347

Adaptation 10

Channel (8)-Leuchte27 NSL RC6

Lichtfunktion C27

Set to brake light = Bremslicht (default is not active)

- To increase brightness

Channel (10)-Leuchte27 NSL RC6

Dimming CD27

Set to 100 (default is 0)

 

‪Reverse lights - increase brightness

9- Central Convenience

16-security code 31347

10-Adaptations

(6) Leuchte 28RFL LC11 dimming AB 28

(6) Leuchte 29RFL RA64 dimming AB 29

Adjust values to what you want. 100%

 

Drls to 100% (with headlights on)

5f2f25829392081f04059acb30213d60.jpg

 

 

Sent from my iPad using Tapatalk

Cheers mate that's epic anymore you find let me know

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Full brake lights are activating the inner tailgate portion (in addition to the standard outer lights) to come on as brake lights.

 

I found coding from a variety of places, OBDeleven forum, this forum and from hunting around. Here's a few bits of coding for some of the things I've done.

 

Deactivate headlight washers

Select Central Electrics

Select Coding

Scroll down the very long list until you find Scheinwerferreinigungslage(

Change to not installed -

Press the "tick-button" to enable the change

The headlight washer should be disabled

 

Disable stop/start

Select Control unit 19

Adaptation

Stop start limit voltage

Value=12

 

Alarm chirp on lock / unlock 

Go into [09] Central Electronics

Go into Security Access and enter 31347

Adaptation channels, and you are looking for:

(1)-Acknowledgement Signals -Akustische Rueckmeldung entriegen (un-lock acoustic feedback)

(2)-Acknowledgement Signals -Akustische Rueckmeldung verriegeln (lock acoustic feedback)

Set one or both to on if you wish.

Then set the following to "on"

 

(7)-Acknowledgement Signals -Menuesteuerung akustische Rueckmeldung (Acoustic lock menu)

This enables a menu setting in the "car" settings, "Locking" menu of the infotainment screen to set alarm chirp on or off when locking /unlocking the car and have the option to switch it on or off from the head unit.

 

Carbon centre console 

Select control 17

Adaptation

Display depiction

Value option 2

 

Inner brake lights (full brake lights)

Module 09 (Central Electrics)

Security Access 16 

Code = 31347

Adaptation 10

Channel (8)-Leuchte27 NSL RC6

Lichtfunktion C27

Set to brake light = Bremslicht (default is not active)

- To increase brightness

Channel (10)-Leuchte27 NSL RC6

Dimming CD27

Set to 100 (default is 0)

 

‪Reverse lights - increase brightness      

9- Central Convenience

16-security code 31347

10-Adaptations

(6) Leuchte 28RFL LC11 dimming AB 28

(6) Leuchte 29RFL RA64 dimming AB 29

Adjust values to what you want. 100%

 

Drls to 100% (with headlights on)

5f2f25829392081f04059acb30213d60.jpg

 

 

Sent from my iPad using Tapatalk

Thank you for taking the time to post that, superb information and help.

Link to comment
Share on other sites

Still to do:

 

Coming home lights long coding

 

and maybe a few other things. 

 

I've been thinking of doing this today and wondered exactly what the coding changes ?

 

My current setup is

 

Leaving Home and Coming Home are both enabled and set at 20 seconds in the cars normal settings menu.

 

1. When Leaving Home in the dark I press the key and my indicators flash once, then my headlights and tail lights come on for 20 seconds.

 

2. On Coming Home I get out of the car, press the remote to lock and the indicators flash but no lights stay on.

 

So what does the coding change ?  Do the lights stay on automatically after exiting and locking the car (I've read if you flash the headlight beam before exiting the car they do this ?)

Link to comment
Share on other sites

I've been thinking of doing this today and wondered exactly what the coding changes ?

 

My current setup is

 

Leaving Home and Coming Home are both enabled and set at 20 seconds in the cars normal settings menu.

 

1. When Leaving Home in the dark I press the key and my indicators flash once, then my headlights and tail lights come on for 20 seconds.

 

2. On Coming Home I get out of the car, press the remote to lock and the indicators flash but no lights stay on.

 

So what does the coding change ?  Do the lights stay on automatically after exiting and locking the car (I've read if you flash the headlight beam before exiting the car they do this ?)

 

I'm not sure Jonny, not fully delved into this mod yet as not really high on my priority list or had time, but assumed that the indicator stalk/flash would be no longer necessary on exiting the car with this adaptation.  At the moment I tend to use the indicator stalk method if I want them on for coming home, but would like not to have to bother doing that.  Ninjageezer (Paul) has done it I think so he might be able to help out on this, or someone else that has done it.  Hopefully someone will post up. 

Link to comment
Share on other sites

OK I think I may have one mod sorted :afro:    I just found this on the OBD Forum :

 

[Q]  Is it possible with OBD 11 to activate coming home lights so I don't have to pull indicator stalk. On mk5 golf lights stayed on for required time after locking car. Mk7 I have to pull indicator stalk to activate this.

 

[A] Yes, the procedure is :-

>Central Electrics
>Security Access 31347
>Adaption
>Comfort illumination
>Coming home verbaustatus change from manual to automatic

 

Not tried it yet myself,  but will do in the next few days and get back on here with my results :smiley:  

Link to comment
Share on other sites

OK I think I may have one mod sorted :afro:    I just found this on the OBD Forum :

 

[Q]  Is it possible with OBD 11 to activate coming home lights so I don't have to pull indicator stalk. On mk5 golf lights stayed on for required time after locking car. Mk7 I have to pull indicator stalk to activate this.

 

[A] Yes, the procedure is :-

>Central Electrics

>Security Access 31347

>Adaption

>Comfort illumination

>Coming home verbaustatus change from manual to automatic

 

Not tried it yet myself,  but will do in the next few days and get back on here with my results :smiley:  

 

That's great, what I was hoping it would do.  Tempted to try it out tonight.  Well needs to be dark, lol. 

Link to comment
Share on other sites

OK I think I may have one mod sorted :afro: I just found this on the OBD Forum :

 

[Q] Is it possible with OBD 11 to activate coming home lights so I don't have to pull indicator stalk. On mk5 golf lights stayed on for required time after locking car. Mk7 I have to pull indicator stalk to activate this.

 

[A] Yes, the procedure is :-

>Central Electrics

>Security Access 31347

>Adaption

>Comfort illumination

>Coming home verbaustatus change from manual to automatic

 

Not tried it yet myself, but will do in the next few days and get back on here with my results :smiley:

Just tried this, but hasn't worked for me, but only tried it the once. Found it all ok and changed from manual to automatic but lights did not come on when ignition off, exiting and locking the car. Will give it another go tomorrow. Let me know if it works for you when you try it. :afro:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...