Jump to content

J Peterman

Junior Members
  • Posts

    39
  • Joined

  • Last visited

Everything posted by J Peterman

  1. Too bad, DS fins were a nice looking product. There is a similar clamp on diffuser fin for the Mk7 R (only) here in the states, but nothing for the facelift/estates.
  2. Seems these are no longer available. Anyone aware of a similar diffuser fin product (or have a set for sale potentially) for the facelift estate?
  3. The Oettinger is made by Remus (is are the stock VW/Audi exhuasts) so according to that logic should fit just fine…
  4. Scorpion system centers the tips coming out of the backbox on the Mk7.5 estate. Perfect opportunity to buy the exhaust without tips and get what you like. RS3 ovals come to mind as a nice option…
  5. Lower EGT with the 4” slag and has been shown to improve spool by a few hundred rpm, especially on larger than stock turbos, catted or not. Cat is downstream from stock position.
  6. Are you planning on upgrading to an aftermarket downpipe in the future or sticking with the stock unit? I’m not sure if Remus even makes their valved system for the Mk7/7.5 estate anymore. It is pricey. But any system designed for the Cupra 300ST 4drive is 100% interchangeable with the Golf R estate. Remus makes a few (all unvalved), even an axleback that you can fit to your Mk7 Estate and would be the cheapest option (+\- a 70mm res delete) with stock downpipe.
  7. Ask APR for a non test pipe file that does not tamper with the O2 sensors that would otherwise result in a CEL from an aftermarket downpipe. Then work on finding an O2 spacer solution that allows your downpipe to not throw a CEL. If you’re running the APR catted downpipe, the cat is downstream from the stock location, so I think that’s the Vibrant J spacer with J facing upstream? Check this thread on the Mk7golf forum: https://www.golfmk7.com/forums/index.php?threads/the-o2-spacer-thread.375034/ Also ask your Q on that forum, which is the most performance oriented Mk7 forum in the states. Make sure you’re able to pass readiness on your emissions read outs via the OBDII port. Then find a shop that’s friendly enough in your area to pass you on the visual inspection. Assuming you’re running APR parts (being APR Stage 3), the APR lettering on the downpipe right in the engine bay would be my biggest concern about passing the visual…
  8. Prototype ready for test fitment. Will report back once completed.
  9. Would love to but the estate shares the same hatch shape as the base golf, while the GTI/R share a different shaped hatch spoiler from the factory.
  10. Still waiting to fit prototypes on my car when available. Hopefully soon.
  11. Incorrect. It’s a larger outer diameter on the side joining the inlet hose which is why you need to use the MST turbo inlet hose (larger diameter than stock or other companies’ hose). All the TIP with larger INNER diameters (including the largest, Turbo Technics & Blaze Performance) neck down to join the stock turbo coldside. A hybrid turbo by definition has larger turbine/compressor wheels stuffed into the OEM housings. As mentioned above, I currently use the V2 TIP with MST TIH on an IS12 (upgrading to a larger turbo in the near future).
  12. Rennwagen is currently producing prototypes based on a template of the Golf/estate rear hatch I sent them recently. I will do some trial fitting for development with my car before they start production. As you can see on their website, similar idea to the aerofabb hatch lip spoiler, but different material (powdercoated aluminum) and can be affixed with either 3M tape alone or additionally with the provided hardware.
  13. Ah, I also have an R estate valance but have a Remus axleback for the Cupra 300ST 4drive, so single backbox exits (identical to the Mk7 R Estate) that are off center from the valance. I’m assuming your backbox exits are centered to the valence like the OEM 7.5 exhaust...making fitting these RS ovals much easier!
  14. Single ovals look A+! How did you end up having them fitted to the valence cutouts?
  15. I can’t definitively say whether the iABED or stock RMS is better. Whichever one can be installed correctly and not leak is the best. An upgraded RSB is the best cheap and easily installed handling upgrade you can buy. Your stocker is just shy of 22m in diameter and hollow, so get something solid and larger diameter. H&R 25mm for example. Moog end links are cheap and great (don’t make any clunking noises) because they’re similar in design to OEM but not made of cheap plastic. Any aftermarket down pipe will work with the Vortex turbos. In the US market, IE, Milltek, AMS, COBB, or Bull-X are all good choices with a cast section near the turbo (good for sound quality), and a high quality sports cat and upper O2 sensor in their stock locations for emissions purposes. Trackslag 4” is also very highly rated and in addition improves spool by several hundred rpm, but the cat is further downstream so it’ll smell and definitely require an O2 spacer to pass any emissions testing. You would also need an intercooler upgrade to run a Vortex turbo. As far as fueling, you can choose to go with just a HPFP, HPFP and LPFP, or MPI & LPFP, again depending on your goals. Don’t need all 3. MPI takes the place of an upgraded HPFP and when paired with LPFP will give you the most fueling headroom. You don’t need a BBK to run Stage 2. Simpler (and cheaper) modifications to improve braking with the stock calipers might include better fluid, stainless steel brake lines, and a more performance oriented brake pad for example. There are also some good, cheaper OEM+ 4 piston bolt-on brake upgrades that would allow you to keep your stock rotors, such as the TTS or Macan calipers. PS this is a great forum with LOTS of very cool R enthusiasts and information from across the pond, but for more detailed info for tuning cars in the US make sure you check out the Golfmk7 forum too!
  16. I also had the RMS and clutch installed by a very good local shop and they noticed a possible leak from their own install the last time the car was up on a lift. They said they don’t recommend this RMS anymore for that reason. If you want to run a higher E blend on the stock turbo, EQT has off the shelf tunes for both E30 and now E85 for the R. So it’s totally safe to run either, they wouldn’t offer a canned option if it wasn’t. The E85 tune doesn’t make any more power than the E30 tune though, it’s mainly for places with lower quality gas for knock resistance. You would need to go custom with a HPFP for more power on a higher E blend, their off the shelf E85 tune also requires a HPFP upgrade. Probably best to decide what route you want to go in the future and incorporate that into your plans now. Want to pick up a Vortex (or other bigger turbo) and run pump gas? You could just do a pump gas and E30 off the shelf tune now for the stock turbo, and then pick up the Autotech HPFP internals and a turbo with a custom tune whenever you decide to go that route. Want to run an E blend on the bigger turbo? Plan for MPI and a LPFP upgrade when the bigger turbo goes in. Save the larger custom tuning expense for when you really need it. You don’t need the upgraded fueling yet for an IS38 on E30.
  17. Again nice research and parts list. Careful with the iABED RMS, lots of improper installs with it and oil leakage. Seems pretty hit or miss. Stock is also fine. Most importantly what are your overall power goals? It’s best do just go straight there to save money once you get into custom tuning. Do you see yourself wanting more than 400whp? An IS38 won’t cut it reliably at the boost levels required, and you’d need to run a high E blend requiring a HPFP/LPFP, if not MPI/LPFP. If that’s the goal, sell your IS38, use the proceeds to upgrade to an EQT Vortex standard housing and an Autotech HPFP and you can make that on pump gas. That’s a very safe, one and done setup that doesn’t mess with factory fueling for maximum reliability. More than 450? Custom ethanol tune with the same turbo. MPI and the A2b brushless RS3 LPFP would be the best way forward. Lots of good info on EQT’s website FAQ.
  18. Very interested to see how you fit RS style ovals to your facelift R! I’ve seen some photos on IG (looks ace) but they don’t show how the tips are aligned from the back boxes into the valence cutouts.
  19. Don’t change the diverter valve. OEM is best. Engine/transmission & dogbone mounts all work in concert with one another. BFI stage 1 are a great choice. Pair them with a Powerflex Yellow (70A, same durometer poly) dogbone insert or hybrid puck and you’re good to go with minimal NVH increase (more so with the puck replacement). A catch can is a waste of money at these power levels unless you plan on tracking and even then, will not stop the PCV from leaking. EQT is the most popular tuner in the States for a reason with excellent off the shelf “staged” tune options for pump gas or even E30 on the OEM turbos. COBB accessport gives you all the room you need to grow into bigger turbos/fueling on the same platform should you decide to in the future. Your choices all well thought out. Go for it.
  20. Aerofabb will be coming out with one for the Mk7 Golf/Estate cars. There is a prototype picture on the BFI website:
  21. It’s true Remus doesn’t do one for the 7.5 GPF Golf R Estate. But the Cupra 300 ST 4drive (R) has literally the same engine, same exhaust routing, and same exhaust. There is a Seat Cupra forum where several 300 ST (non-R) owners transplant the stock Mk7.5 Golf R Estate exhaust into their cars because it’s the same exhaust as used in the higher trim Carbon edition & ST R, and sounds better. So if the Golf R Estate stock exhaust is the same as the stock ST R exhaust, it follows that an aftermarket ST R system will bolt onto your car. I would know, I drive a Mk7.5 1.8T 4Motion Golf Sportwagen (US market Estate) with the Mk7.5 Estate rear valance and bolted the Remus Cupra 300ST axleback onto my car. It sounds great. I would recommend the ST R Remus system for your GPF R. The back boxes are the same as my axleback only with dual exits from each (total of 4 tailpipes), and includes the connecting pipe to the GPF (“non-resonated pipe” for a GPF-back system). I would have purchased this exact system only we don’t have GPF so I’m running a resonator and they wouldn’t sell the back boxes alone without the GPF connecting pipe. The non-res valved system for the Mk7 Estate would also fit but it’s significantly more expensive. The Remus tips are nice but quite expensive for what they are. If you want to save a bit, you can buy the Remus system without tips and buy whatever tips you like and have them welded on by an exhaust shop.
  22. Remus offers a GPF-back for the Seat Cupra ST R that is perfectly compatible with the R estate with GPF (same exhaust stock on the cars). Milltek and Scorpion do one as well. Take a look at some YouTube videos with a proper set of headphones and see which sound you like best.
×
×
  • Create New...