Jump to content

DaveDeller

Junior Members
  • Posts

    26
  • Joined

  • Last visited

Everything posted by DaveDeller

  1. Love my v3's. I'm on 19 prets with 034 mounts and the superpro control arms, it's a really good setup. Far better than stock.
  2. Looks good, what mods did you end up going for? Or are you still planning them? I see you were asking about ghost immobilisers. I have one on mine along with a scorpion s5 tracker. The ghost is good and definitely works. The only downside is that sometimes when the cars auto stop start comes in, a message on the dash comes up 'start engine manually' it did it before the ghost its just now its really annoying because you can't just turn the key! You need to do a full restart procedure with keys out of the ignition, back in, ghost code then turn the car back on. Which as you can imagine doesn't go down well if you are at traffic lights! It's like the worst stall imaginable! Buy for peace of mind coupled with a tracker I'm now at the point that if someone wants it that badly then fair play and I will be on to the insurance the next morning.
  3. looks good as a light turbo upgrade. Certainly would be a reliable quick car Also a relatively good value option as i assume you would only really need a hpfp and the turbo. Also I checked back and it was 102RON that Garrett publish for 485hp on that Turbo not 104 as I had initially recalled, so I would guess on standard fuelling and not their own dyno 450 sounds about right I can see why it would be popular. The larger option they do looks very laggy though!
  4. Are there any graphs of the garrett running normal fuel? The only one I have seen it was on 104RON to hit 450
  5. Hi, Yeah I went stock to Rick's stage 2 about 12 months ago. Not that many miles done yet on the stage 3 but initial thoughts are: general town driving below 2000rpm you aren't really pushing it so the slight drop in torque from stage 2 at low revs isn't particularly noticable. Throttle response is still good so for just general driving there isn't much in it, a slight drop in immediate shove but really not as much as I thought it would be. 2000-3000rpm is where I have noticed it. The stage 2 car felt very alive at this point where the stage 3 tune feels like it wants to be just a bit further up the road before it comes alive. Not quite as immediate response but again still fine, Kind of between stock and stage 2. I never had a stage 1 but imagine it would be a bit like that. Anything above 3000rpm there is little comparison and the difference just gets bigger the higher up you go! All in all, general town driving there isn't much in it, and on a spirited drive the new tune is f*&King mental. I agree with others who have commented for track use and daily driving I really didn't want to go over 500hp. I'm intending running this until the m3 touring can be picked up reasonably second hand..... so I'll be waiting a while! Only negative was I would have loved to see it with a decent batch of fuel in it to see what the numbers actually are without the timing being pulled. Rick blames fuel storage over lockdown for it not being up to par. He was saying they were working on a 911, took it to fill up with vpower and it lost 30hp just because of the fuel!
  6. Venom 500 dyno graph So dyno tune done. Rick did say that the fuel quality was pretty poor considering it was V Power and it was pulling timing quite a bit. Hopefully get it on a dyno again when it has a better batch in it! I wanted a pretty safe output as its stock internals and will be used as daily and also track. 480hp and a decent torque curve peaking at 420lb/ft. It drives well and certainly has some poke
  7. If you are near enough to use Unicorn really no point considering anything else in my opinion. My Unicorn stage 2 hasn't missed a beat and I'm back in with them on Wednesday for stage 3
  8. Depends on parts used and whether you go for new or used etc... But mine was about: R600 intake- 380 Turbo technics intake pipe - 230 Wagner intercooler (fitted) - 950 BCS Powervalve 100 CEL (fitted) - 950 Unicorn stage 2 and TCU - 950 I fitted the intakes myself as its super simple. Didn't fancy taking the whole front of my car off for the intercooler, and didn't fancy doing the downpipe on axle stands! You can obviously do it cheaper with used parts or cheaper options, like you don't absolutely need the intercooler for some stage 2 tunes and you can go cheaper again if the downpipe isn't catted. But as a rough guide there you go. Also if you have manual instead of the DSG tune you will need uprated clutch pack
  9. Just what do you go for that is a viable alternative to a 2018 7.5R that doesn't cost SIGNIFICANTLY more. I need an estate so a decent mileage 2nd hand rs4/c63s is 50k, going new on one of those is pushing 80k. I enquired about a mk8 R wagon and they want pretty much 50k... I couldn't think of anything else I would want so just dumped some more money in to the golf and decided to wait for the depreciation to hit on the g81 m3 (I have the estate r because of kids and dogs) in 4 years time. If the R blows up in the meantime at least I had fun with it right 🤔
  10. I have the superpro camber mounts with v3's and the superpro alloy control arms. It rides fine, slight increase in noise but not so much volume more tone and pitch if that makes sense. It certainly was a lot less noticeable than the engine mounts, I had to take the transmission one back off for those as it was just too much for me having all 3 done. As for roll bar I've got front and rear h&r with racingline links. Not noticed any understeer in particular but I do run the front struts slightly softer than the rears. I like the balance with it all done and the better turn in from the camber is well worth the slight reduction in refinement. It certainly is still absolute fine to daily
  11. Yeah the suggestion above was for a relatively inexpensive simple solution. It does come with the downside of possible drone as mentioned. If the budget would stretch further there are other options. Personally I just went straight to stage 2 and a bcs 100cel downpipe and left it at that as far as exhaust goes. If I was staying stock I would likely go with a bcs cat back system the miltek is pretty popular too and sounds decent
  12. I'm booked in with unicorn next week to have a venom 500 ball bearing hybrid tuned in so can report back on that one if you like?
  13. Wow this thread has brought back some happy memories! I had a system in mine worth more than the saxo it was in! Haha! Alpine head unit, alpine type r front speakers, 4x alpine r 6x9"s on a trimmed mdf stealth shelf, 2x f-407 amps, f-1507 sub amp powering 2 15" kicker L7's and a 2 farad capacitor. Looking back I dont know what I was thinking but I enjoyed it at the time! As for now, I wouldn't think i would go with 6x9's but I would look for some decent drop in front replacements.
  14. Thanks, that's good to know. I'm alright on my stage 2 for power but I'm just wary of the is38! So looking at some options that won't pop the engine but get a more robust turbo, with a moderate bump I power. Seems like a decent option with that spool.
  15. Is anyone running the stage 1 garrett g25 (gt2260s)? I would be interested in seeing the power output/dyno charts. The only one I have found is the one garrett themselves supply.
  16. Yeah this is the route I would suggest. If you eventually do go for dp then the 100 cel from bcs is very good and will be sufficient for emissions testing on mot etc. A pretty safe option is to have a look locally for a garage that sells & fits sports cat downpipes and also does mot testing and have them fit one they would be happy with.
  17. @Rick@UnicornMotorDev @nige bcs just realised i would probably need to tag for you to see my previous post!
  18. Resurrecting an old thread here, but just wondering if rick/nige could let me know what the power limitations are for stage 3 on the bcs 100 cel (assuming fuel pumps are upgraded too). Does the limitation still sit with the strength of the block or does the downpipe kick in first? I already have the bcs downpipe on the car with Rick's stage 2 and it's brilliant! Just looking at options for stage 3 as you do get used to the power quite quickly 😀
  19. It feels a little like you would get going over a slight rumble strip.
  20. Basically a perfect reply if you ask me! Can't comment on unicorns stage 1, but I have Rick's stage 2 and tcu on my 7.5r estate and it hasn't skipped a beat. They are very good on the phone prior to a tune to talk through mods etc and getting out of the car what you want so I would just give them a ring and see what they suggest and go from there.
  21. Quick question on yours and whether same experience as mine. As you say they have now softened up nicely and are a decent upgrade. I do however get a vibration in manual mode coming off throttle at around 1800-2000rpm, I'm assuming it's fueling related? Do you get the same?
  22. I have the 380mm REVO BBK on mine. Clears fine with 12mm spacers on Pretoria 19's.
  23. Great looking build by the way OP
  24. I have the set of 3 REVO mounts on mine. I would say the drive train definitely feels sharper than stock. The engine tone also changes in the cabin, sounds tighter, not sure how to describe it really. As far as vibration and harshness, this is noticeable while idling but when the car is moving it feels pretty much the same as stock to me. If you do a lot of stop start driving on a daily commute it could get a little annoying. I would certainly recommend you find a car local to yourself that has had it done and see what you think before going the for the full set. I don't mind it as the car isn't idling much but if i was in traffic everyday i would have gone back to stock by now. I would note they do soften slightly after a few hundred miles, when i first had it done i was tempted to just drive straight back to the fitting shop and get them swapped out!
×
×
  • Create New...