Jump to content

What non-performance enhancing mods have you done to your R 2?


75Type2

Recommended Posts

3 hours ago, MC71 said:

Rieger Splitter and Maxton side and rear bits and bobs.....

 

 

 

image.thumb.jpeg.0ec0d5c191fd3a6e0c22bce0b387d30d.jpeg

 

 

image.thumb.jpeg.07e80b5b7d22884a7d53ccefc7dce29c.jpeg

 

 

image.thumb.jpeg.d32ed54cc81f5e8639638a87c779b9e2.jpeg

 

 

 

got spacers on there pal? i almost went for the reiger splitter just like this but it didn't look great in the photos, after seeing this though it does look nice. If my Maxton gloss black v2 cracks or anything im definitely going to get one.

Link to comment
Share on other sites

31 minutes ago, Boj27 said:

 

got spacers on there pal? i almost went for the reiger splitter just like this but it didn't look great in the photos, after seeing this though it does look nice. If my Maxton gloss black v2 cracks or anything im definitely going to get one.

 

No spacers...not needed with the REVO wheels really as they fill the arches as they are. 

Link to comment
Share on other sites

Same here the maxton bits are on my list now i think

Ive just ordered some gloss black wing mirror caps so theres the first little mod for me
ive done a search but cant seem to find anything on taking/putting the caps off/on. Could be tapatalk as the search function seems crap. Im also trying to find some info on wrapping the lower silver trim on the front bumper, does the trim just pop off or is it a bumper off jobby? Would be really appreciated if someone could maybe send me links to relevant threads or let me know how etc.. cheers.


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

1 hour ago, ashleyman said:

 

Looks great. How did you find installing those Spats (sic). Need to do mine at some point!

 

Spats were very easy to do as I followered another members fitting of theirs (Stobsie IIRC) which was with double sided tape and 3 self tapping screws per side, works a treat and is NEVER going move EVER! Followed that method with the side difussers too, double sided taped along whole length and then (with a mates help) stuck into place, you'll only get one go at this, then drilled pilot holes through both diffuser and skirt and then used 7 sell tapping screws per side. Mark hole positions on spats and diffusers first before sticking part in place so as to avoid current screws etc.

 

i bought Halfords own double sided tape......best tape I've ever used. Was more than stong enough to hold EVERYTHING in place without screws I bet!! 

Link to comment
Share on other sites

1 hour ago, DUB said:

 

These bits are really growing on me. Do you have anymore pics of the car?

 

Maybe from a bit further away?

 

Thanks 1f44d.png

 

 

I'll post some more pics in my build thread (once I take some over the weekend)...saves spamming this thread......(any more 😇)

 

 

1 hour ago, Lee63 said:

Same here the maxton bits are on my list now i think emoji6.png

Ive just ordered some gloss black wing mirror caps so theres the first little mod for me emoji106.png
ive done a search but cant seem to find anything on taking/putting the caps off/on. Could be tapatalk as the search function seems crap. Im also trying to find some info on wrapping the lower silver trim on the front bumper, does the trim just pop off or is it a bumper off jobby? Would be really appreciated if someone could maybe send me links to relevant threads or let me know how etc.. cheers.


Sent from my iPhone using Tapatalk

 

The mirror caps pop off pretty easily once you know where the clips are....there are only 2. Once you see the inside of the mirror caps you'll see the 2 clips so will know where to unclip from the inside of the mirror housing. I just positioned mirror glass in lowest position which gave enough room to get a very thin flat headed screw driver inside to release the taps......then the caps will just slide off........new ones just pop on once positioned correctly. Some peeps completly remove the glass for better access....up to you.

 

Lower silver trim on the bumper does not pop off unless you remove the bumper but I wrapped mine in place e and without removing the bumper. Did mine in 3 sections as per the trim itself. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...