Jump to content

Light wheels.


Sam22

Recommended Posts

Really depends on what you classify "best" as.

 

If you want lightweight and strength then OZ Ultraleggeras are good.  Motec Ultralight are another option.

 

Team Dynamics are a mainstay of the motorsport world and their pro race 1.2 for 18" and under or 1.3 for 19" and above are very light for their size and very strong 

Link to comment
Share on other sites

Really depends on what you classify "best" as.
 
If you want lightweight and strength then OZ Ultraleggeras are good.  Motec Ultralight are another option.
 
Team Dynamics are a mainstay of the motorsport world and their pro race 1.2 for 18" and under or 1.3 for 19" and above are very light for their size and very strong 

I was going to suggest the team dynamics. Value for money they seem right up there too.

What ^ said
Link to comment
Share on other sites

2 hours ago, MikeBuzz said:

Anyone running the clubsport alloys on a R, I have noticed they are not as wide as factory wheels


I’m pretty certain the standard 18” Cadiz alloys on the Golf R  are a 7.5J x 18”  wheel with an offset of ET49. The Belvedere alloys that were the standard wheels on the Mk7 Golf GTI Clubsport and mk7.5 GTI TCR are also 7.5J x 18” ET49. So they’re the same width and offset. 

 

https://www.kunzmann.de/shop/en/wheels-18-inch-rims-belvedere-vw-golf-7-vii-gti-genuine-volkswagen.htm

 

Link to comment
Share on other sites

15 minutes ago, R_wannabe_owner said:


I’m pretty certain the standard 18” Cadiz alloys on the Golf R  are a 7.5J x 18”  wheel with an offset of ET49. The Belvedere alloys that were the standard wheels on the Mk7 Golf GTI Clubsport and mk7.5 GTI TCR are also 7.5J x 18” ET49. So they’re the same width and offset. 

 

https://www.kunzmann.de/shop/en/wheels-18-inch-rims-belvedere-vw-golf-7-vii-gti-genuine-volkswagen.htm

 

My mistake, I think these look better than the prez, does anyone know if these suffer the issue some prez owners have with buckling and splitting?

Link to comment
Share on other sites

14 hours ago, Maplesyrup said:

Enkei weights come close but I don’t think there’s anything lighter than the Clubsport wheels which can be bought for sensible money :)

I sit things out when more spending is discussed, as I’m still recovering from my R purchase.

These look a quite compelling route to follow - the weight, the looks, the strength...and even 18” with maybe 225:40 MPS4 Tyres (?)  might give an R some of the “playfulness”;from a GTI.   For about £3000 or so, All in. 
It’s an interesting alternative route, maybe combined with an Uprated Rear Anti roll bar too? 

Edited by NRW
Price
Link to comment
Share on other sites

2 hours ago, R_wannabe_owner said:


I’m pretty certain the standard 18” Cadiz alloys on the Golf R  are a 7.5J x 18”  wheel with an offset of ET49. The Belvedere alloys that were the standard wheels on the Mk7 Golf GTI Clubsport and mk7.5 GTI TCR are also 7.5J x 18” ET49. So they’re the same width and offset. 

 

https://www.kunzmann.de/shop/en/wheels-18-inch-rims-belvedere-vw-golf-7-vii-gti-genuine-volkswagen.htm

 

 

1 hour ago, MikeBuzz said:

My mistake, I think these look better than the prez, does anyone know if these suffer the issue some prez owners have with buckling and splitting?


I don’t know - I’ve not read of any instances of cracked or buckled Belvedere alloys. However, to put that into some form of context, there will be far fewer mk7 / mk7.5 Golfs with these fitted than there are with Pretoria’s, as Belvederes were only available on two models; the mk7 GTI Clubsport which was produced in limited numbers, and the mk7.5 GTI TCR model which was produced towards the end of the mk7.5’s life, so again, relatively few TCR’s were built. Also, not all Clubsport’s and TCR’s will have had Belvederes as some owners would have opted for larger 19” wheels.

 

The one thing that might put me off the Belvederes is that they are diamond cut, and as with many diamond cut alloys it might be only a matter of time before the dreaded white worm corrosion appears! 😠

Link to comment
Share on other sites

14 hours ago, Maplesyrup said:

I had a set of belvederes powder coated once the white worm started, coming up to 30,000 miles on them with no problems I’ve just had them powder coated again to change the colour, new tyres were needed all round so it seemed a good time to do it.

Do you have any pictures of them powder coated?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...