jez-R

I am on 100 and it feels good

I am running a JB4 on a mk7.5 with no issues, plus a few extra mods and custom map6, will happily challenge any mapped car 😉

I am running the JB4 on the facelift with no issues 😀

I think this is it mate 👍 1) Go to Instruments (17) 2) Select adaptations 3) Find and select: "Ignition active message; actuator" (Ignition active message; trigger on some models) 4) Change from 'driver's door' to 'no display'

Have you tried the below. This worked for me, although I was using VCDS 1) Select Control unit 19 2) Select Adaptation 3) Select Stop start limit voltage 4) Change value to 12 (default is 7.6) 5) Press the green tick to confirm

Awesome, thanks 👍

So does the Ramair Hose fit Ok with the Racingline Turbo 90 Elbow?

Here is the coding mate - Engine Module - Coding - Byte 9 - Check the second box (Bit 2)

Just give them a ring and give your Reg, they come into your local store next day.

Trade Parts Specialist - https://tps.trade/

The licence plate holder is available from TPS and is around £22.

Welcome to the LSG club,