-
Posts
241 -
Joined
-
Last visited
Content Type
Profiles
Articles
Forums
Events
Store
Classifieds
Everything posted by TweedsideR
-
Does your recorder have 4 or 8 channels? That'll answer your question. You can only have as many cameras as the recorder has channels to plug them into.
- 463 replies
-
- security
- protection
-
(and 3 more)
Tagged with:
-
The original set-up was single 5ft fluorescent in the middle of the double garage. I replaced that with a 5ft LED double-tube batten fitting. I replaced the single switch with a double switch and then added four 4ft double-tube battens spaced around the garage to give even lighting. Here's a link to the 4ft batten/tube bundles, the 5ft bundle came from the same source. They are easy to fit (if you know how to wire them in) and are nice and bright. LED light bundle I haven't included pics as the link shows what they look like.
-
If you look through some of the posts, you'll find that people do reply (but not often). On the other hand, maybe this entire thread is totally worthless and should simply be deleted.
-
Came out of High street onto Bridge Place at lunchtime on a soggy day in Gala.
-
Have a care what type of door you fit. Mine was an "up-and-over" panel door with a frame inside the brick opening. This intruded about 8 inches into each side if the opening and made for a very tight fit for the wing mirrors. I replaced them with electrically-operated roller panels with the frame behind the opening which allows much greater clearance. I also replaced the original fluorescent light with multiple LED tube fittings. Admittedly, my garage is a double, but the same thinking applies Pix:
-
Oh, go on.... why don't you go the whole hog and ask what fuel he's going to use? 😆
-
Kudos! That's a very well composed and post-processed shot.
-
Thank you for rescuing the thread! 😀
-
Gee, I thought this was the photos thread - or has it changed to yet another tyres thread? Where's a moderator when you need one? 😉😀
-
Yeah, I remember your earlier frequent and strident admonitions to "never have anything on the windscreen" 😀 until you saw the light! But ETTO - and I was very impressed with the Nanolex on my previous GTi and now on the R. It's amazing to drive along in the rain and see the drops just run right off the top of the screen without needing the wipers at all. But below about 30mph in light rain you do need the wipers, and even with the Bosch Aerotwins there can be some judder. As you say, a coating of C2V3 seems to provide just enough friction to stop it without having too bad an impact on the Nanolex.
-
I've had this problem after polishing the windscreen and applying Nanolex Ultra coating to it, which works great and avoids the need for wipers above about 30mph. However, it's so smooth that the wipers don't "flip-flop" which causes the leading edge to judder as it's forced across the screen. I have solved it by cleaning the screen and applying a coating of Gtechniq C2V3 over the top of the Nanolex.
-
140 up here in the Scottish Borders.
-
I had this happen on my Mk7 GTi (2013/13). The dealer re-glued it FOC, but I had to leave the car at the dealer's for 24 hours to let the glue cure properly. I had no problem after that.
-
I had the same problem recently when I re-arranged my garage before the R arrived.The walls were already painted over but the floor was bare concrete. I just shifted stuff outside and hosed the floor down, then brushed two years' worth of dust, leaves, dead insects and goodness knows what else. Since then a regular sweep out (with the car outside!) has kept it tidy. I'm still tempted to seal the floor and fit plastic interlocking tiles as others on here have done, but that may have to wait until all the detailing equipment expenses have died down.
-
Ooooooooh how sexist! I'll have you know I wash my own cloths and towels! Or at least the washing machine does 😉
-
I had the same problem with the original garage doors, compounded by the door frame having been built inside the brickopening. I had the doors replaced with electric roller doors and gained a huge amount of entry width - see pics below with my old GTi. The lighting was massively improved as well.
-
What detailing stuff have you bought today
TweedsideR replied to garrymournian's topic in R Detailing
I fitted a wooden panel to the back wall of my garage and screwed assorted hooks from B&Q onto it. That lets me hang up the Karcher hose and accessories. The Vac and Blow mounting bracket is fitted to the wall and the extended power lead and hose hang over additional hooks. FInally, I made up a bracket from part of a plastic box with slots cut in it so I can hang up my wheel woolies to air-dry after use. The Ikea trolley with baskets in it holds any spray bottles and detailing stuff that I may need to wheel around the car as it's being washed, etc. -
I've bookmarked these for when I get round to removing my wheels for full cleaning and coating: https://www.amazon.co.uk/Alloy-alignment-Thread-suitable-Volkswagen/dp/B01F5AA3FG/ref=pd_lpo_sbs_60_t_0?_encoding=UTF8&psc=1&refRID=DTCEA3B1SSB4KAZ04B8Q
-
Go to the top right of the page and look for the search field, click on the drop-down next to it and select "all content", then in the search box type in "dashcam" as on word and click on search. At this time there are 270 entries. Lots of good info and options there.
-
Ha! I think I've found a better solution. Double-sided sticky tape wrapped round a couple of fingers of the glove gives a really nice grip on the pad but it's still easy to remove the pad when you need to. Fortunately I've got plenty of the stuff in my photo print mounting toolbox. WoWo pads are cheap enough that I prefer to treat them as disposable, so now I don't need to wash them first.
-
...and especially for turning my white glass cloths pink and my household yellow mf cloths orange. Bonus!
-
If, like me, you have French doors that are two doors with a lock in each, remember to order the locks as a pair so that they can both be opened with a single key.
-
Sorry, I meant applying the Black Hole glaze. WoWo MFs work great for buffing off. I'll see if the pads are any better after washing. Thanks.
-
Thanks. By doing the polishing by hand, and it being my first try, I realise I didn't work the polish in well enough and probably applied too much so I gave myself extra work buffing it off and didn't get the best possible result. A learning experience I guess. One issue I did have was with the WoWo foam applicators. I found that although they work well, the backing is a bit slippery against the nitrile gloves and they kept trying to slip out of my hand and onto the garage floor. I there anything I can do to make them less slippery or am I doing something wrong? BTW using the DI water filter really cut down on the drying effort!