Jump to content

Performance Pack Component Part numbers?


Recommended Posts

Hi all,

 

Our new Webshop has been coming together over the last 6 months and is almost in its final stages. 

 

Today I have added all of the OEM parts which I feel are the most relevant with part numbers listed. The prices are all at the RRP so please do contact me if you have interest in any items before purchasing. 

 

If there is anything I have missed please let me know, also any feedback on the site would be great.

 

https://vdsshop.co.uk/collections/oem-parts

 

Cheers Ash. :)  

Link to comment
Share on other sites

  • 2 weeks later...

i got the spoiler and adhesive but have no idea how to fit it, going to wait till i can do it in day light anyway, here some pics from the box

 

7a4geHh.jpg

 

https://imgur.com/a/HEx3h

 

The red that is on the spoiler already seems the same as the tape that came in the 3m box or do you apply the 3m tape onto the red on the spoiler?

 

 

Link to comment
Share on other sites

18 hours ago, mark118 said:

i got the spoiler and adhesive but have no idea how to fit it, going to wait till i can do it in day light anyway, here some pics from the box

 

7a4geHh.jpg

 

https://imgur.com/a/HEx3h

 

The red that is on the spoiler already seems the same as the tape that came in the 3m box or do you apply the 3m tape onto the red on the spoiler?

 

 

 

Is the red not a pull tab on the backing of the 3M tape to make the backing easier to remove ?

 

Did it not come with any wipes to clean and prep the tailgate painted surface ?

Link to comment
Share on other sites

On 9/1/2018 at 18:30, mark118 said:

i got the spoiler and adhesive but have no idea how to fit it, going to wait till i can do it in day light anyway, here some pics from the box

 

7a4geHh.jpg

 

https://imgur.com/a/HEx3h

 

The red that is on the spoiler already seems the same as the tape that came in the 3m box or do you apply the 3m tape onto the red on the spoiler?

 

 

Is this the spoiler part number? 5G6 827 940 04

Link to comment
Share on other sites

The spoiler is glossy and looks the same as on my 7.5 (the black shiny bits above the exhaust and the bottom sides of the front of the car)

 

Also the confusing thing is, is that there is the red tape which is already on the spoiler out of the box, and the "fitting kit" was just the 3m tape in a box,

 

its like they didn't know the tape came pre fitted  with the spoiler or do i have to use the fitting kit tape as well? Has anyone fitted one of these yet?

 

All that was in the spoiler box was the spoiler, no wipes or anything to prepare the area or templates/guides or instructions, just the spoiler in the wrap. Same with the 3m tape box just the 3m roll of tape.

 

Again just to to clarify, my spoiler came with what i assume is the same tape as the "fitting kit" already applied to the spoiler, so maybe you do not need the fitting kit, only if you need to take it off and reapply i guess.

 

you missed a 1 on the part number at the end i think unless that doesn't matter  5G6 827 940 041

  • the fitting kit number is D 438 P15 A1 but my spoiler came with it i think already applied, but wait till maybe more people get there spoiler in case it was a mistake 

i ordered from TPS Barking just before Christmas and picked up last Saturday, the guy said it had only became available to get delivered on the 22nd or so.

 

How would you guys prepare the area for sticking it on?

Link to comment
Share on other sites

33 minutes ago, mark118 said:

The spoiler is glossy and looks the same as on my 7.5 (the black shiny bits above the exhaust and the bottom sides of the front of the car)

 

Also the confusing thing is, is that there is the red tape which is already on the spoiler out of the box, and the "fitting kit" was just the 3m tape in a box,

 

its like they didn't know the tape came pre fitted  with the spoiler or do i have to use the fitting kit tape as well? Has anyone fitted one of these yet?

 

All that was in the spoiler box was the spoiler, no wipes or anything to prepare the area or templates/guides or instructions, just the spoiler in the wrap. Same with the 3m tape box just the 3m roll of tape.

 

Again just to to clarify, my spoiler came with what i assume is the same tape as the "fitting kit" already applied to the spoiler, so maybe you do not need the fitting kit, only if you need to take it off and reapply i guess.

 

you missed a 1 on the part number at the end i think unless that doesn't matter  5G6 827 940 041

  • the fitting kit number is D 438 P15 A1 but my spoiler came with it i think already applied, but wait till maybe more people get there spoiler in case it was a mistake 

i ordered from TPS Barking just before Christmas and picked up last Saturday, the guy said it had only became available to get delivered on the 22nd or so.

 

How would you guys prepare the area for sticking it on?

 

 

I'd just give the area a really good clean. Maybe use a little washing up liquid and water on the area, this should strip any wax and de-grease.  

Link to comment
Share on other sites

9 hours ago, mark118 said:

The spoiler is glossy and looks the same as on my 7.5 (the black shiny bits above the exhaust and the bottom sides of the front of the car)

 

Also the confusing thing is, is that there is the red tape which is already on the spoiler out of the box, and the "fitting kit" was just the 3m tape in a box,

 

its like they didn't know the tape came pre fitted  with the spoiler or do i have to use the fitting kit tape as well? Has anyone fitted one of these yet?

 

All that was in the spoiler box was the spoiler, no wipes or anything to prepare the area or templates/guides or instructions, just the spoiler in the wrap. Same with the 3m tape box just the 3m roll of tape.

 

Again just to to clarify, my spoiler came with what i assume is the same tape as the "fitting kit" already applied to the spoiler, so maybe you do not need the fitting kit, only if you need to take it off and reapply i guess.

 

you missed a 1 on the part number at the end i think unless that doesn't matter  5G6 827 940 041

  • the fitting kit number is D 438 P15 A1 but my spoiler came with it i think already applied, but wait till maybe more people get there spoiler in case it was a mistake 

i ordered from TPS Barking just before Christmas and picked up last Saturday, the guy said it had only became available to get delivered on the 22nd or so.

 

How would you guys prepare the area for sticking it on?

 

So it looks like the Spoiler has tape preapplied at correct body-contact points? That should make it easier to mount.

 

For contact prep, to ensure area is wax and dirt free, I'd use either some detailing/body shop post compounding paint cleaner also known as panel wipe (there are loads)  or just get some  IPA (something, something alchohol) to wipe over contact points and ensure tape.  adhesion is maxxed.

 

I do recall that there were some issue with early shipment Rs - on the rear hatch black gloss side spoiler fillets (that are taped on), coming loose in hot weather.  Remedy was different dealer tape.  So I assume the PP add-on uses same stuff...

 

Quite notable that just the tape can withhold the (claimed) 20Kg extra downforce (or is that 20kg less-lift) with sticky back plastic😀

Link to comment
Share on other sites

On 12/27/2017 at 08:00, ASH7R said:

Hi all,

 

Our new Webshop has been coming together over the last 6 months and is almost in its final stages. 

 

Today I have added all of the OEM parts which I feel are the most relevant with part numbers listed. The prices are all at the RRP so please do contact me if you have interest in any items before purchasing. 

 

If there is anything I have missed please let me know, also any feedback on the site would be great.

 

https://vdsshop.co.uk/collections/oem-parts

 

Cheers Ash. :)  

 

Hey Ash,

 

Would you ship to the US? Spoiler isn't available here yet!

Link to comment
Share on other sites

For spoiler firment I would do a dry fit and apply low tack masking tape at both ends and in 3 or more places along the front edge. Remove and measure to the tape to ensure that it’s central and then use the tape as a guide for when you fit it for real - I don’t think the 3M tape will give you much wiggle room once it makes contact to the surface.

Link to comment
Share on other sites

 
So it looks like the Spoiler has tape preapplied at correct body-contact points? That should make it easier to mount.
 
For contact prep, to ensure area is wax and dirt free, I'd use either some detailing/body shop post compounding paint cleaner also known as panel wipe (there are loads)  or just get some  IPA (something, something alchohol) to wipe over contact points and ensure tape.  adhesion is maxxed.
 
I do recall that there were some issue with early shipment Rs - on the rear hatch black gloss side spoiler fillets (that are taped on), coming loose in hot weather.  Remedy was different dealer tape.  So I assume the PP add-on uses same stuff...
 
Quite notable that just the tape can withhold the (claimed) 20Kg extra downforce (or is that 20kg less-lift) with sticky back plastic


The part where you mention about the tape withholding the downforce to my mind would be helping to press it down to help keep it stuck solid.

What does anyone else think?
Link to comment
Share on other sites

52 minutes ago, DUB R4XX said:

 


The part where you mention about the tape withholding the downforce to my mind would be helping to press it down to help keep it stuck solid.

What does anyone else think?

 

 

Thats assumes downforce force is even all over the item..  I'd have thought Elevated Rear trailing edge would be pressed downmore, levering the front leading edge upwards in the process?

 

.....am reading the ( excellent) Adrian Newey book at moment. Will see what he says 🤓

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Current Donation Goals

    • Raised £170
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...