Parttimer Posted March 12, 2018 Report Share Posted March 12, 2018 Only turn it off when maneuvering back and forward in to position the car in the drive for cleaning and when I don't want the handbrake to come on after removing the ignition key. Shug and Wagon R 1 1 Quote Link to comment Share on other sites More sharing options...
SMUL3 Posted March 12, 2018 Report Share Posted March 12, 2018 Are you dsg?YesSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
FamousAfroJay Posted March 12, 2018 Report Share Posted March 12, 2018 I too always leave it on, makes town driving very easy with the DSG box. Quote Link to comment Share on other sites More sharing options...
golf7.5r Posted March 12, 2018 Report Share Posted March 12, 2018 1 hour ago, SMUL3 said: Yes Sent from my iPhone using Tapatalk OK, I think I can see what I'm doing. I hardly ever drive in D, 99% of the time I'm in M, but when I slide it across into D it kills the engine as it should. Not sure why I need to do that, but hey ho VW Quote Link to comment Share on other sites More sharing options...
SMUL3 Posted March 12, 2018 Report Share Posted March 12, 2018 OK, I think I can see what I'm doing. I hardly ever drive in D, 99% of the time I'm in M, but when I slide it across into D it kills the engine as it should. Not sure why I need to do that, but hey ho VW D for traffic etc. M for funSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Idylla Posted March 12, 2018 Report Share Posted March 12, 2018 Please help... is there any way to 'change' the Start Stop system on the 7.5 to behave like on the 7.0? The engine cutting out before I've stopped is doing my nut in. k20evo 1 Quote Link to comment Share on other sites More sharing options...
golf7.5r Posted March 13, 2018 Report Share Posted March 13, 2018 16 hours ago, Idylla said: Please help... is there any way to 'change' the Start Stop system on the 7.5 to behave like on the 7.0? The engine cutting out before I've stopped is doing my nut in. LOL, I'm trying to get mine to cut in at all Mk (7.5). That doesn't sound right at all?? Quote Link to comment Share on other sites More sharing options...
golf7.5r Posted March 13, 2018 Report Share Posted March 13, 2018 OK, so is there a way of adding rear footwell courtesy lights to our cars? Quote Link to comment Share on other sites More sharing options...
Idylla Posted March 13, 2018 Report Share Posted March 13, 2018 1 minute ago, golf7.5r said: LOL, I'm trying to get mine to cut in at all Mk (7.5). That doesn't sound right at all?? I've come from a MK7 - so I knew the system quite intimately - if you feathered the break pedal, the system wouldn't kick in at all - which was brilliant. Then, if I knew I was going to be stopped at lights for a bit longer, I'd fully put my foot down, thus kicking the system in and cutting the engine. However, I've carried this technique over to the new car, and it seems to cause more issues - the engine will stop itself at about 3-4mph thinking that I'm coming to a stop, when I'm actually just looking for vehicles coming from either side. The engine then has to start again when I accelerate causing a lovely judder. Worse still - is when I am coming to a stop, the engine cuts out, and I think I've activated the auto hold by braking, whereas it hasn't activated, it was just the engine dying that has caused me to stop - I then let go of the brake, presuming that I'm on auto hold which causes the engine to start and then the car to leap forwards! I read a few other posts and this does seem to be the correct behaviour for the 'new' system, but if anyone can let me know for sure that'd be great. I've actually had to order an OBDEleven to code out start-stop - it's unusable at the moment. Quote Link to comment Share on other sites More sharing options...
daverogers2001 Posted March 13, 2018 Report Share Posted March 13, 2018 On 12/09/2016 at 23:00, Troll said: Not seen this mentioned before, but I have noticed that when sat in traffic and the car stops and engine goes off (start/stop), then when the car in front moves off the car automatically restarts without touching the loud pedal. Anyone else notice this? Yes, I definitely believe this to be the case, as my car did it over the weekend. I commented on this happening to my wife and said how clever I thought it was - but she didn't seem all that interested really! lol Quote Link to comment Share on other sites More sharing options...
Idylla Posted March 13, 2018 Report Share Posted March 13, 2018 4 minutes ago, daverogers2001 said: Yes, I definitely believe this to be the case, as my car did it over the weekend. I commented on this happening to my wife and said how clever I thought it was - but she didn't seem all that interested really! lol Yep - uses the front radar, even if the ACC is turned off. Quote Link to comment Share on other sites More sharing options...
andy_r Posted March 13, 2018 Report Share Posted March 13, 2018 56 minutes ago, Idylla said: I've come from a MK7 - so I knew the system quite intimately - if you feathered the break pedal, the system wouldn't kick in at all - which was brilliant. Then, if I knew I was going to be stopped at lights for a bit longer, I'd fully put my foot down, thus kicking the system in and cutting the engine. However, I've carried this technique over to the new car, and it seems to cause more issues - the engine will stop itself at about 3-4mph thinking that I'm coming to a stop, when I'm actually just looking for vehicles coming from either side. The engine then has to start again when I accelerate causing a lovely judder. Worse still - is when I am coming to a stop, the engine cuts out, and I think I've activated the auto hold by braking, whereas it hasn't activated, it was just the engine dying that has caused me to stop - I then let go of the brake, presuming that I'm on auto hold which causes the engine to start and then the car to leap forwards! I read a few other posts and this does seem to be the correct behaviour for the 'new' system, but if anyone can let me know for sure that'd be great. I've actually had to order an OBDEleven to code out start-stop - it's unusable at the moment. This isn't new for the 7.5 as it was already brought in with the later 7s. Mine's a '66' plate and will turn the engine off whilst still moving as you coast to a stop regardless of what you do with the brake. Quote Link to comment Share on other sites More sharing options...
gregozedobe Posted March 13, 2018 Report Share Posted March 13, 2018 1 hour ago, Idylla said: I've come from a MK7 - so I knew the system quite intimately - if you feathered the break pedal, the system wouldn't kick in at all - which was brilliant. Then, if I knew I was going to be stopped at lights for a bit longer, I'd fully put my foot down, thus kicking the system in and cutting the engine. However, I've carried this technique over to the new car, and it seems to cause more issues - the engine will stop itself at about 3-4mph thinking that I'm coming to a stop, when I'm actually just looking for vehicles coming from either side. The engine then has to start again when I accelerate causing a lovely judder. Worse still - is when I am coming to a stop, the engine cuts out, and I think I've activated the auto hold by braking, whereas it hasn't activated, it was just the engine dying that has caused me to stop - I then let go of the brake, presuming that I'm on auto hold which causes the engine to start and then the car to leap forwards! I read a few other posts and this does seem to be the correct behaviour for the 'new' system, but if anyone can let me know for sure that'd be great. I've actually had to order an OBDEleven to code out start-stop - it's unusable at the moment. Sounds about the same as mine. If I am really, really light on the brake pedal the engine won't stop, but unless I am stopping on a significant up slope I have to press the brake pedal too hard and the engine cuts out well before I've actually come to a halt. If I wiggle the steering wheel the engine will re-start and stay running for the duration of that stop. My current workaround is to hit the auto stop/start button immediately after I start the engine, disabling it every time (it took a while to program me, but now it is a habit so I don't have to think about it). If I know I'm going to be stopped for a while (eg roadworks or a particularly long traffic light signal cycle) then I re-enable it for that stop only, then disable again once I am moving. IIRC there are some options to change it: VCDS/OBDII coding to fool it via temp/battery voltage settings Commercial plugin device to OBD port to permanently disable/re-enable the function (changes each time it is plugged in) Home-made alteration to switch (sounds not-simple unless you are good with electronics). Idylla 1 Quote Link to comment Share on other sites More sharing options...
Idylla Posted March 13, 2018 Report Share Posted March 13, 2018 1 minute ago, gregozedobe said: VCDS/OBDII coding to fool it via temp/battery voltage settings This is my current plan! Quote Link to comment Share on other sites More sharing options...
daverogers2001 Posted March 13, 2018 Report Share Posted March 13, 2018 2 hours ago, Idylla said: Yep - uses the front radar, even if the ACC is turned off. Damned Clever that!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.