submarinedog Posted September 11, 2017 Report Share Posted September 11, 2017 11 hours ago, WHY.A.H.WHY.A said: Sure, I can write a very very short DIY as I already have a wiring diagram as well as a link the module I purchased I look forward to this! I watched zed4me's video but figured it would be different when doing it to the OEM led's so I didn't want to risk it. How do you find the 'clicking' sound when the signals are on, is it very audible from inside the cabin? andy203 1 Quote Link to comment Share on other sites More sharing options...
WHY.A.H.WHY.A Posted September 11, 2017 Report Share Posted September 11, 2017 I look forward to this! I watched zed4me's video but figured it would be different when doing it to the OEM led's so I didn't want to risk it. How do you find the 'clicking' sound when the signals are on, is it very audible from inside the cabin?The click sound is barely noticeable one you are idle, with road noise it's completely gone. Sent from my A0001 using Tapatalk Quote Link to comment Share on other sites More sharing options...
WHY.A.H.WHY.A Posted September 12, 2017 Report Share Posted September 12, 2017 DYI is uphttp://www.vwroc.com/forums/topic/22633-dyi-10-sequential-taillights/Sent from my A0001 using Tapatalk MattM7R 1 Quote Link to comment Share on other sites More sharing options...
JoeyJoeJo Posted September 12, 2017 Report Share Posted September 12, 2017 Security day today - Thinkware F770 f&r fitted today, initial run round the block looks decent quality. Tracker also fitted. Quote Link to comment Share on other sites More sharing options...
JoeyJoeJo Posted September 13, 2017 Report Share Posted September 13, 2017 New plates today from Plates For Cars, nice subtle BS/address details. Quote Link to comment Share on other sites More sharing options...
Philgr Posted September 24, 2017 Report Share Posted September 24, 2017 (edited) Can anyone recommend where I can get some aftermarket gloss black wing mirrors covers i have a new r on order and I’m looking to pick up some bits ready for its arrival thanks in advance Phil G Edited September 24, 2017 by Philgr Quote Link to comment Share on other sites More sharing options...
jinxy Posted September 24, 2017 Report Share Posted September 24, 2017 Security day today - Thinkware F770 f&r fitted today, initial run round the block looks decent quality. Tracker also fitted. Any photos of the installation? Did you fit it yourself or get it professionally installed? What tracker did you go for? Quote Link to comment Share on other sites More sharing options...
JoeyJoeJo Posted September 24, 2017 Report Share Posted September 24, 2017 Got it fitted professionally, the company gave me a great deal buying both from them. Will get a couple of pics tomorrow, guy put the front one dead centre under the centre gubbins but I think I'd rather have it higher to the left but have spare pads and can easy move it. Unfortunately I was tied up working so he just did his normal install. Tracker is global telemetrics, basic but works well. Couldn't stop checking it when it was the dealers for a couple of days, waiting for some scrote to take on a test! jinxy 1 Quote Link to comment Share on other sites More sharing options...
jinxy Posted September 24, 2017 Report Share Posted September 24, 2017 Got it fitted professionally, the company gave me a great deal buying both from them. Will get a couple of pics tomorrow, guy put the front one dead centre under the centre gubbins but I think I'd rather have it higher to the left but have spare pads and can easy move it. Unfortunately I was tied up working so he just did his normal install. Tracker is global telemetrics, basic but works well. Couldn't stop checking it when it was the dealers for a couple of days, waiting for some scrote to take on a test! What was the company? Tried Googling a couple of companies but all have mixed reviews. What was the total price if you don't mind me asking? Off to research trackers now too! Quote Link to comment Share on other sites More sharing options...
daz05 Posted September 24, 2017 Report Share Posted September 24, 2017 Painting the disk hub area so they don't rust again! Quote Link to comment Share on other sites More sharing options...
JoeyJoeJo Posted September 24, 2017 Report Share Posted September 24, 2017 What was the company? Tried Googling a couple of companies but all have mixed reviews. What was the total price if you don't mind me asking? Off to research trackers now too! Sorry, thought I'd mentioned it - was AVR Mobiles, phoned them up for a deal. It was 500 for both fitted. jinxy 1 Quote Link to comment Share on other sites More sharing options...
LouCyffer Posted September 25, 2017 Report Share Posted September 25, 2017 What was the company? Tried Googling a couple of companies but all have mixed reviews. What was the total price if you don't mind me asking? Off to research trackers now too! Jinxy, don't forget to look in our Group Buy area (you may need 25 posts before you can access Classified) as @Mark@sasmobile from SASUK has fitted trackers and immobilisers for plenty of us on here. He's definitely worth contacting & personally I highly recommend his services. Mark@sasmobile 1 Quote Link to comment Share on other sites More sharing options...
jinxy Posted September 25, 2017 Report Share Posted September 25, 2017 Jinxy, don't forget to look in our Group Buy area (you may need 25 posts before you can access Classified) as @Mark@sasmobile from SASUK has fitted trackers and immobilisers for plenty of us on here. He's definitely worth contacting & personally I highly recommend his services. Thanks. Couple more posts and I will take a look. Quote Link to comment Share on other sites More sharing options...
SamS Posted September 25, 2017 Report Share Posted September 25, 2017 15 hours ago, daz05 said: Painting the disk hub area so they don't rust again! This is on my list of 'want to do', not sure if I have the painting skills though 😞 Quote Link to comment Share on other sites More sharing options...
Trossuk Posted September 25, 2017 Report Share Posted September 25, 2017 Trust me its simple. A bit of prep sanding or wire brush and some smooth hammerite, either brushed or aerosol. It's all in the prep. Just make sure no paint goes on the brakes surface. Clean it off with thinners. SamS 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.