Jump to content

Bilstein Coilover Instalment Problems


Recommended Posts

Hi all, Needing some help here.

 

Just spent most of the day today installing my Blistein B14 coilovers to my MK7 R (non-DCC) along with brand new uprated top mounts.

 

After the installation, along with a few ups and downs on the ramp getting the car height right, the car was done!  

 

First impressions the height looked perfect and overall the drive is much better.

 

Problems started to occur then turning the wheel full lock both ways at a stand still and when turning at low/creeping speeds. There is absolutely no noise what so ever now when going over bumps slow or fast, its just when turning at very low speeds! 🤬 

 

The creaking and knocking is horrendous when doing this and I have no idea why it should be this bad. 

 

We took our time with the instalment and made sure everything was tighten up as it should be. The car feels a lot better at normal speeds but its only when at a stand still or going very slow and turning that I am getting this awful knocking. 

 

 The car will need to get alignment some time this week which may or may not make things better, but surly the alignment can't be that off to cause this kind of noise.

 

Any ideas what else to check or what this may be?

 

Really annoying when you spend good money on parts and it seems to cause more problems.

 

Many thanks. 

 

 

Link to comment
Share on other sites

2 hours ago, Jacobrownoly said:

What you guys think? 
7E075674-6772-45ED-AEFF-C07DACAE2B9F.thumb.jpeg.d6d6a7e408b431822402f07aa7a02f57.jpegD46C6841-CA2B-49BD-810C-951F2A3EDC07.thumb.jpeg.b2ecf6d522a2c53d66affd6d439eda59.jpeg

That looks really good Jacob.

Good quality dampers make all the difference.

Have / are you getting a full Geo?

 

My recommendation is to install the Superpro Camber /Caster bush set.

They're great value you’ll get crisper sharper turn in and it will help dial out some understeer.

 

Id get it Geo set up after. I got Tom Walker at Retro Resus. He sets up many VW Cup and PGTI Champ cars as well as road going R’s.

 

Are you running uprated rear ARB?

A must and with all of the above it will transform it on a budget.

Link to comment
Share on other sites

7 hours ago, Msportman said:

That looks really good Jacob.

Good quality dampers make all the difference.

Have / are you getting a full Geo?

 

My recommendation is to install the Superpro Camber /Caster bush set.

They're great value you’ll get crisper sharper turn in and it will help dial out some understeer.

 

Id get it Geo set up after. I got Tom Walker at Retro Resus. He sets up many VW Cup and PGTI Champ cars as well as road going R’s.

 

Are you running uprated rear ARB?

A must and with all of the above it will transform it on a budget.


Yeah the new set up is great. In terms of full Geo, yes, I have had the car fully aligned (my dad has a Hunter Alignment system and managed to get it bang on)   
 

I will look into that super pro set 👍🏼
 

In regards to the ARB, I am still on the stock one. Again, this is something I will think about for the future. At the minute though, I think the car is perfect 👌🏼 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...