Jump to content

rodacollier

Members
  • Posts

    101
  • Joined

  • Last visited

Everything posted by rodacollier

  1. Some like it more Goth and some don’t. I find it’s a generational difference. I don’t care for blacked out window tint and blacked out wheels that match the tires because it’s just way too much black in the wheel well. I’m not a fan of chrome level bright but I am more a fan of silver highlights to match what VW did with the car or going with a tone that with matches or accents the paint color. I’ve had a variety of paint schemes over the years and prefer those that are easiest to keep clean, and don’t show scratches, except for white ... which to me will always be a color for an appliance.
  2. Do the pads have any play in them - might be hard to test without removing wheel. Maybe the thickness of the rotors are different than OEM. That noise you describe is commonly solved by the clips unless the tension on them isn’t sufficient. If a shop did the work for you I would take it to them for follow-up, unless you supplied the parts.
  3. Listen at 11:50 about the pads, maybe your pads are not like OEM that have the anti rattle clips. https://youtu.be/Q5BKPZ6jRho
  4. I’ll stick to letting all of mine drain out. If someone didn’t have ramps and didn’t have a place to store them, I could see this as a consideration over the time and $90 expense of taking it to a shop. Sent from my iPhone using Tapatalk
  5. Alpine x902/i902d-g7 ... bypass the rubbish amp and gain full control of signals so you can add new audio components as you go (Amp, sub, speakers).
  6. I can’t help, but I’m intrigued by this and would love to see/learn more about the issue. I don’t have a noise I can hear in my car, but I hear a squeak from the rear suspension when people get in out of my car. Never bothered me enough to take it to a dealer. I’ve seen the rear frame aftermarket bushing kits and how they claim to remove slop, but I figured it was for those that track and hit corners and brakes really hard not to fix an OEM flaw. Sent from my iPhone using Tapatalk
  7. Anything mounted to your top / roof ? Using OEM wiper blades ? If you find a suspect area around your front window seal you could put down some tape like racing crews sometimes do and take it for a spin. Sent from my iPhone using Tapatalk
  8. What does notifying insurance get you? Sent from my iPhone using Tapatalk
  9. That Honda start was terrible and very unlike previous matchups I’ve watched Sent from my iPhone using Tapatalk
  10. Where r u located? I’d let u use my vcds Sent from my iPhone using Tapatalk
  11. Did you try the infotainment system? Here’s the sequence from my owners manual Sent from my iPhone using Tapatalk
  12. Notorious... anyone doing a clutch replaces it due to that. I bet any dealer would do it for free.
  13. If the buzzing is a rattle / squeak noise you can reproduce with putting a little pressure with your fingers on the trim ... you could try what I did when I had that issue with the arm rest - squirt a small amount of wd-40 around the seam and wipe it clean then use a little interior cleaner on the surface area. Prying that trim piece off with a trim tool might break it and then you’d be really pissed. Or it might go back on looser than it fits today. I’ve had my doors off to install speakers and don’t recall being able to see the clips from the backside.
  14. Replacing factory component speakers with aftermarket speakers that need 50+ RMS watts of power and come with crossovers to manage frequencies is going to sound weak hooked to a factory amp putting out 12-20 RMS ( on a good day ) that has its own crossover built in. The days of just unscrewing speakers and screwing in better ones is no longer.
  15. I went with the Alpine x902d radio and Jl Audio 8 channel and Mono Amps, Component Speakers and W7 Sub.
  16. Had a pair of F1 Supercar on an SRT and they were a POS and I replaced them with Michelin Super Sports after 10k miles because they were so bad in every category. Would love to see an American brand get it together, but Michelin makes incredible tires that nearly defy physics. '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  17. I bet that was interesting to see how it got towed. Drag it on its top to where there is room to flip it over? Or find all the owners of the cars on the street and have them clear their cars out? Would this count as a Flip and Run ? [emoji23]
  18. Take it to the dealer for replacement '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  19. What happens when you reboot it by holding down the power button? Comes back ? '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  20. I’d recommend looking at the BCS resonator delete pipe. Those guys understand drone and the physics that cause it. '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  21. Why are you wanting to change your existing head unit? What further audio or video enhancements will you want to do later? '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  22. Alpine doesnt sell the 902 in the US so I bought the x902d on eBay from Italy and had it installed along with a Dve-5300 at my local audio shop that is an alpine dealer. I also had them install new front and rear speakers ( JL audio cs3 ) and a JL audio xd800 amp and a Jl audio jx1000 sub amp. The installer said it was straight forward and according to instructions, and like their YouTube video. It was time consuming for him to get all this done in a day but he did it. I love the Alpine unit with the full control at your finger tips on crossover, timing, equalization and the CarPlay is perfect! There was no loss of control of the integrated car functions like service schedule, heating and air, dash controls ... Highly recommended... just wish it had the ability to do FM HD in the US market. '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
  23. IMO and based on my experience with my R - it’s not worth it to make that mod unless you stiffen up the mounts ( reduce engine movement ) and you’ve gone with a drop in performance filter and made the mods to the air box ( reduce restrictions). The OEM mounts allows so much engine movement, especially if you have a manual trans. It’s usually not a problem to allow all that engine movement, but if you go Stage 2 your downpipe could start hitting / rattling due to less clearance and to solve that you often need to stiffen up the mounts. Once you do that you shouldn’t worry about replacing the OEM intake pipe that allows all that flex/movement. '16 MK7 R Manual Uni Stage 2 & BCS Exhaust
×
×
  • Create New...