Raiden Posted June 20, 2020 Report Share Posted June 20, 2020 I’m getting a company car soon and I’m going to try and keep the R.Long story but I’ll have to keep it in an industrial estate tucked up in a corner outside. Couple of things?How’s best to stop the brakes seizing.Security wise it’s got an extra immobiliser, stoplock elite pro and I’m thinking to add a clamp to one of the wheels or take the battery out. Could thieves still trailer it up? I’ll have cctv watching it plus I’ll use the company car to block it in overnight so I’m hoping it will put them off. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Shug Posted June 20, 2020 Report Share Posted June 20, 2020 2 minutes ago, Raiden said: I’m getting a company car soon and I’m going to try and keep the R. Long story but I’ll have to keep it in an industrial estate tucked up in a corner outside. Couple of things? How’s best to stop the brakes seizing. Security wise it’s got an extra immobiliser, stoplock elite pro and I’m thinking to add a clamp to one of the wheels or take the battery out. Could thieves still trailer it up? I’ll have cctv watching it plus I’ll use the company car to block it in overnight so I’m hoping it will put them off. Sent from my iPhone using Tapatalk Same place on an industrial estate for a while is risky, as local scrotes will soon work out it’s left there and it may be a target. If not theft then for parts. A lot easier to “attack” on a deserted estate than outside a house where might be heard.. A wheel clamp will make it more obvious that it’s long term parked, and if removing battery won’t that mean it’s a pain to just jump in and use? Can you find a friend with a large drive or more private off street parking? Quote Link to comment Share on other sites More sharing options...
twodb Posted June 20, 2020 Report Share Posted June 20, 2020 29 minutes ago, Raiden said: I’m getting a company car soon and I’m going to try and keep the R. Long story but I’ll have to keep it in an industrial estate tucked up in a corner outside. Couple of things? How’s best to stop the brakes seizing. Security wise it’s got an extra immobiliser, stoplock elite pro and I’m thinking to add a clamp to one of the wheels or take the battery out. Could thieves still trailer it up? I’ll have cctv watching it plus I’ll use the company car to block it in overnight so I’m hoping it will put them off. Sent from my iPhone using Tapatalk I agree with Shug. This cost $, but you're buying peace-of-mind IMHO. There are other like options... https://www.extraspace.com/self-storage/vehicle-storage/car-storage/ Quote Link to comment Share on other sites More sharing options...
Raiden Posted June 20, 2020 Report Share Posted June 20, 2020 I can park it on the street but I thought if some tw@t bumped into it but then again like you guys say it’s safer then being tucked up out the way. The mrs is doing my head in about our driveway as we share it with a shop we rent out. She’s already got 2 vehicles sitting outside that don’t get used but now I want mine sitting there she says it’s unfair on the shop . She’s also moaning if I sold it as she wants me to keep it. Can’t bloody win and I did debate asking a couple people if I could keep it at there place but if someone broke in wanting the keys I’d feel a bit guilty Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
mark118 Posted July 12, 2020 Report Share Posted July 12, 2020 whats the correct part number/spec number for dsg fluid? mk7.5. 7 speed dq381 ogc box are there any alternatives to the vw bottles like febi or eurocarparts has triple qx (which looks suspect). Thanks Quote Link to comment Share on other sites More sharing options...
Martibhoy Posted July 17, 2020 Report Share Posted July 17, 2020 My Cadiz alloys were refurbished when I bought my car but have to go back as they are going milky white around the edges. I was wondering is it worth getting them diamond cut again or just get them powder coated? Also if powder coated what would be a good colour to look at ( on a red car) cheers Martin Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted July 17, 2020 Report Share Posted July 17, 2020 My Cadiz alloys were refurbished when I bought my car but have to go back as they are going milky white around the edges. I was wondering is it worth getting them diamond cut again or just get them powder coated? Also if powder coated what would be a good colour to look at ( on a red car) cheers Martin Trouble with diamond cutting is you can only do it so many times... If I had Cadiz I would powder coat them, or alternatively put the powder coating money towards a different set of alloys as not to my tasteSent from my VOG-L09 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Martibhoy Posted July 17, 2020 Report Share Posted July 17, 2020 5 minutes ago, SpursMadDave said: Trouble with diamond cutting is you can only do it so many times... If I had Cadiz I would powder coat them, or alternatively put the powder coating money towards a different set of alloys as not to my taste Sent from my VOG-L09 using Tapatalk This will be done under a warranty, when I bought the car the garage got the wheels refurbished for me, they have given me a 12 month warranty and they are going to repair them. My thinking is that they will diamond cut them again and maybe the same thing will happen, should I push for powder coating ? Or should I just let them machine them again and see what happens Quote Link to comment Share on other sites More sharing options...
Booth11 Posted July 17, 2020 Report Share Posted July 17, 2020 48 minutes ago, Martibhoy said: My Cadiz alloys were refurbished when I bought my car but have to go back as they are going milky white around the edges. I was wondering is it worth getting them diamond cut again or just get them powder coated? Also if powder coated what would be a good colour to look at ( on a red car) cheers Martin What is your preference of those two options? Maybe as you’ve already had them diamond cut finish and they are suffering whiteworm (very common issue on VW diamond cut wheels), then a change would be good if you can persuade the garage. It’s down to your personal colour preference as to what powder coated colour you like, but red is one of those colours that actually looks good with lots of wheel colours, so if you go that way might come down what look you want. I like anthracite with red, but it can also carry off bright silver and black wheels really well. That makes the choice more difficult in some ways I guess. Do you have a leaning towards any particular powder coated colours? Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted July 17, 2020 Report Share Posted July 17, 2020 This will be done under a warranty, when I bought the car the garage got the wheels refurbished for me, they have given me a 12 month warranty and they are going to repair them. My thinking is that they will diamond cut them again and maybe the same thing will happen, should I push for powder coating ? Or should I just let them machine them again and see what happens Ah fair enough if it's a free job I would push for powder coating as it will last better, you could persuade them by saying it will be cheaper Have a look at ezmods website he does vinyl inlays for Cadiz might give you an idea on powdercoat and adding a bit of colour maybe... Sent from my VOG-L09 using Tapatalk Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted July 17, 2020 Report Share Posted July 17, 2020 Just looked on ezmods and they just to blackout bits for Cadiz... Sent from my VOG-L09 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Martibhoy Posted July 17, 2020 Report Share Posted July 17, 2020 Cheers for the reply’s. I was considering a few different colours. Anthracite was one black was another, just considering powder coating as it will be a better long lasting finish. I will have a chat with the guy when I drop the car off and see what finish he will hang his hat on . I’m sure he won’t want me coming back if it happens again, if anyone has any pics of different colours of wheels on a red car I would love to see them cheers again Booth11 1 Quote Link to comment Share on other sites More sharing options...
Booth11 Posted July 17, 2020 Report Share Posted July 17, 2020 17 minutes ago, Martibhoy said: Cheers for the reply’s. I was considering a few different colours. Anthracite was one black was another, just considering powder coating as it will be a better long lasting finish. I will have a chat with the guy when I drop the car off and see what finish he will hang his hat on . I’m sure he won’t want me coming back if it happens again, if anyone has any pics of different colours of wheels on a red car I would love to see them cheers again Have a browse through the mk7 Members’ Ride threads as there’s a few red Rs in there and no doubt some wheel colour inspiration. Quote Link to comment Share on other sites More sharing options...
Martibhoy Posted July 17, 2020 Report Share Posted July 17, 2020 8 minutes ago, Booth11 said: Have a browse through the mk7 Members’ Ride threads as there’s a few red Rs in there and no doubt some wheel colour inspiration. I will do, thanks 👍 Booth11 1 Quote Link to comment Share on other sites More sharing options...
Smokes Posted July 19, 2020 Report Share Posted July 19, 2020 I did something extremely stupid yesterday 😔 I jacked up my car to check the pucks were out as the ride is very firm (no DCC) but I’ve clearly put the jack in the wrong place. Damaged the rocker panel and skirt by the looks of it. I’m going to take it to a body shop tomorrow but I’m worried it’s going to be pricey £££. So annoyed at myself!!!!! + there wasn’t even any pucks in! Booth11 and Starnzy 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.