Booth11 Posted July 19, 2020 Report Share Posted July 19, 2020 25 minutes ago, Smokes said: I did something extremely stupid yesterday 😔 I jacked up my car to check the pucks were out as the ride is very firm (no DCC) but I’ve clearly put the jack in the wrong place. Damaged the rocker panel and skirt by the looks of it. I’m going to take it to a body shop tomorrow but I’m worried it’s going to be pricey £££. So annoyed at myself!!!!! + there wasn’t even any pucks in! Damn! Don’t beat yourself up too much, we’ve all done these types of things. And instantly regretted our actions. Hopefully the bodyshop can sort it without too much of a hit in the wallet. For future ref there’s a few threads on here cover best jacking points, recommendations for trolley jacks and advice on use of things like hockey pucks used at jacking points, so worth a browse of those if next time. Quote Link to comment Share on other sites More sharing options...
gregozedobe Posted July 19, 2020 Report Share Posted July 19, 2020 34 minutes ago, Smokes said: I did something extremely stupid yesterday 😔 I jacked up my car to check the pucks were out as the ride is very firm (no DCC) but I’ve clearly put the jack in the wrong place. Damaged the rocker panel and skirt by the looks of it. I’m going to take it to a body shop tomorrow but I’m worried it’s going to be pricey £££. So annoyed at myself!!!!! + there wasn’t even any pucks in! Ouch ! 😲 That looks expensive. Might be worth having a good look underneath to see where the proper jacking points are. IIRC There is an Audi kit available to fit some jacking pads that are meant for a 4 point car lift. Quote Link to comment Share on other sites More sharing options...
Starnzy Posted July 19, 2020 Report Share Posted July 19, 2020 I bought one of these a few months ago for use with a trolley jack and it’s spot on. Perfect fit into the pinch weld jacking points. https://www.ebay.co.uk/itm/Audi-A3-S3-8V-Tool-Jack-Pad-Adapter-Pinch-weld-rubber-pad-trolley-jacking-pad/282814554636 SpursMadDave and Booth11 2 Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted July 19, 2020 Report Share Posted July 19, 2020 I bought one of these a few months ago for use with a trolley jack and it’s spot on. Perfect fit into the pinch weld jacking points. https://www.ebay.co.uk/itm/Audi-A3-S3-8V-Tool-Jack-Pad-Adapter-Pinch-weld-rubber-pad-trolley-jacking-pad/282814554636 Nice find! I just got a hockey puck off AmazonSent from my VOG-L09 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Smokes Posted July 19, 2020 Report Share Posted July 19, 2020 24 minutes ago, Starnzy said: I bought one of these a few months ago for use with a trolley jack and it’s spot on. Perfect fit into the pinch weld jacking points. https://www.ebay.co.uk/itm/Audi-A3-S3-8V-Tool-Jack-Pad-Adapter-Pinch-weld-rubber-pad-trolley-jacking-pad/282814554636 Nice one, thanks. Quote Link to comment Share on other sites More sharing options...
Smokes Posted July 20, 2020 Report Share Posted July 20, 2020 23 hours ago, gregozedobe said: Ouch ! 😲 That looks expensive. Might be worth having a good look underneath to see where the proper jacking points are. IIRC There is an Audi kit available to fit some jacking pads that are meant for a 4 point car lift. I’ve been quoted £200. An expensive mistake but could have been worse I suppose. I was expecting closer to £500. Quote Link to comment Share on other sites More sharing options...
gregozedobe Posted July 20, 2020 Report Share Posted July 20, 2020 40 minutes ago, Smokes said: I’ve been quoted £200. An expensive mistake but could have been worse I suppose. I was expecting closer to £500. Quick ! Get them to do it before they change the quote... Maybe they plan on doing a PDR, that would keep the price down. Booth11 1 Quote Link to comment Share on other sites More sharing options...
Booth11 Posted July 20, 2020 Report Share Posted July 20, 2020 45 minutes ago, Smokes said: I’ve been quoted £200. An expensive mistake but could have been worse I suppose. I was expecting closer to £500. That is a reasonable price. What exactly have they quoted for? Quote Link to comment Share on other sites More sharing options...
Smokes Posted July 20, 2020 Report Share Posted July 20, 2020 37 minutes ago, gregozedobe said: Quick ! Get them to do it before they change the quote... Maybe they plan on doing a PDR, that would keep the price down. Booked in for 3rd August. 33 minutes ago, Booth11 said: That is a reasonable price. What exactly have they quoted for? Something along the lines of removing the anti chip paint, pulling the dent out, repainting it with anti chip paint and then straightening the side skirt.. I went to another place and they quoted £300. Booth11 1 Quote Link to comment Share on other sites More sharing options...
dj219957 Posted July 20, 2020 Report Share Posted July 20, 2020 Fortunate that they can paint up to the line of the anti chip line. Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted July 20, 2020 Report Share Posted July 20, 2020 I’ve been quoted £200. An expensive mistake but could have been worse I suppose. I was expecting closer to £500.Not too bad at all, hope it's a good job Sent from my VOG-L09 using Tapatalk Smokes 1 Quote Link to comment Share on other sites More sharing options...
Booth11 Posted July 20, 2020 Report Share Posted July 20, 2020 2 hours ago, Smokes said: Booked in for 3rd August. Something along the lines of removing the anti chip paint, pulling the dent out, repainting it with anti chip paint and then straightening the side skirt.. I went to another place and they quoted £300. Sounds good, hopefully all be sorted soon and you can forget it ever happened. Smokes 1 Quote Link to comment Share on other sites More sharing options...
Kneel Posted July 20, 2020 Report Share Posted July 20, 2020 On 19/07/2020 at 11:21, Smokes said: I did something extremely stupid yesterday I`ve done the same myself in the past to a GTi, although I realised something wasn`t quite right as I was jacking it up and let the jack down exceptionally fast, I was properly pissed off too. It wasn`t quite as bad looking as yours @Smokes but £200 for you to get it sorted aint too bad. Smokes 1 Quote Link to comment Share on other sites More sharing options...
Shug Posted July 20, 2020 Report Share Posted July 20, 2020 Why does someone driving what looks like an S3, come screaming up on my bumper on a 30 limit road and sit there looking to overtake, bobbing out and back in for a mile of so, then not stick with me when we hit the dual stretch and I put my foot down. And then when I slow down for my exit go screaming past a few miles later as if they’re going for the land speed record doing about 75 and struggling Because they are in a smoky old diesel, probably a base 1.6, modded to look like an S3. Rant over. goodbadboy and SpursMadDave 2 Quote Link to comment Share on other sites More sharing options...
trancem Posted July 29, 2020 Report Share Posted July 29, 2020 Hi guys, I have a quick question Why is my menu screen for selecting drive modes (eco, comfort, normal, race, individual) in black and white whereas I have seen pics of other ones in colour? I have a 7.5 R (2017) with the 8 inch screen but I am i sure I have seen other 17 plates in colour! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.