taskettle Posted January 1, 2019 Report Share Posted January 1, 2019 Thanks MonsterWalker and gregozedobe for the replies, I'll do some experimenting in a quite street and not at the busy intersection Quote Link to comment Share on other sites More sharing options...
Charles M Posted January 3, 2019 Report Share Posted January 3, 2019 When I drive along, and need to do a quick 3 point turn, engaging reverse takes an awful long time (as well as giving a satisfying burble). Is it normal that the DSG take a second or two to go from D into R? Its quite annoying when you want to do a quick 3 point turn Quote Link to comment Share on other sites More sharing options...
dopper99 Posted January 3, 2019 Report Share Posted January 3, 2019 3 hours ago, Charles M said: When I drive along, and need to do a quick 3 point turn, engaging reverse takes an awful long time (as well as giving a satisfying burble). Is it normal that the DSG take a second or two to go from D into R? Its quite annoying when you want to do a quick 3 point turn My old M3 with a DCT 'box was the same, took a couple of seconds to engage reverse and can be very annoying at times. I reverse onto the drive and can end up holding up the traffic if they are belting towards me. In contrast the ZF 8 speed in BMW goes into reverse pretty quick so it must be a dual clutch 'box issue. Quote Link to comment Share on other sites More sharing options...
SpursMadDave Posted January 3, 2019 Report Share Posted January 3, 2019 When I drive along, and need to do a quick 3 point turn, engaging reverse takes an awful long time (as well as giving a satisfying burble). Is it normal that the DSG take a second or two to go from D into R? Its quite annoying when you want to do a quick 3 point turnI reverse on to my drive and yes a pause but it wouldn't say a second or two just feels like it I guess...Sent from my SM-G935F using Tapatalk Quote Link to comment Share on other sites More sharing options...
drdaveboy Posted January 6, 2019 Report Share Posted January 6, 2019 ive noticed slight delay with dsg box going to reverse but better than crunched gear in my old car Quote Link to comment Share on other sites More sharing options...
gregozedobe Posted January 7, 2019 Report Share Posted January 7, 2019 On 03/01/2019 at 21:23, Charles M said: When I drive along, and need to do a quick 3 point turn, engaging reverse takes an awful long time (as well as giving a satisfying burble). Is it normal that the DSG take a second or two to go from D into R? Its quite annoying when you want to do a quick 3 point turn I just tried on my R (DQ381 7 speed) and the delay would have been around 0.5 second to start moving again (going from R to D and back to R). Quote Link to comment Share on other sites More sharing options...
QuietQuackers Posted January 8, 2019 Report Share Posted January 8, 2019 How does lane assist work when "driving enthusiastically" on a well sighted road i.e. mild touching of the white lines? Can it be temporarily turned off easily enough? Cheers Quote Link to comment Share on other sites More sharing options...
taskettle Posted January 10, 2019 Report Share Posted January 10, 2019 QuietQuackers, lane assist can be easily turned of in the settings, I did it the other day as its a pest when driving though road works with multiple line markings. Quote Link to comment Share on other sites More sharing options...
taskettle Posted January 10, 2019 Report Share Posted January 10, 2019 While discussing the driver assist package, is there an easy way of disabling the overtaking on the left restriction. This is legal in Australia and the assist should not try to prevent it by slowing the car down. Also a problem when turning left into a slip lane with a slow car continuing straight. Quote Link to comment Share on other sites More sharing options...
QuietQuackers Posted January 10, 2019 Report Share Posted January 10, 2019 42 minutes ago, taskettle said: QuietQuackers, lane assist can be easily turned of in the settings, I did it the other day as its a pest when driving though road works with multiple line markings. Cheers, glad it can be turned off! Quote Link to comment Share on other sites More sharing options...
gregozedobe Posted January 11, 2019 Report Share Posted January 11, 2019 18 hours ago, taskettle said: While discussing the driver assist package, is there an easy way of disabling the overtaking on the left restriction. This is legal in Australia and the assist should not try to prevent it by slowing the car down. Also a problem when turning left into a slip lane with a slow car continuing straight. AFAIK there is no way to do it via normal menu settings, but I think I've read somewhere that it can be switched off with coding software eg VCDS, OBDII etc Quote Link to comment Share on other sites More sharing options...
GolfRWag Posted January 12, 2019 Report Share Posted January 12, 2019 On 11/01/2019 at 18:19, gregozedobe said: AFAIK there is no way to do it via normal menu settings, but I think I've read somewhere that it can be switched off with coding software eg VCDS, OBDII etc I have just experienced the avoid passing on the left programming this week, annoying but not insurmountable with a quick prod of the accelerator. Be nice to find out how to get around it with VCDS! Quote Link to comment Share on other sites More sharing options...
VWR2018 Posted January 12, 2019 Report Share Posted January 12, 2019 2 hours ago, GolfRWag said: I have just experienced the avoid passing on the left programming this week, annoying but not insurmountable with a quick prod of the accelerator. Be nice to find out how to get around it with VCDS! OBDEleven has a very simple way to turn that off. Quote Link to comment Share on other sites More sharing options...
GolfRWag Posted January 12, 2019 Report Share Posted January 12, 2019 (edited) On 13/01/2019 at 00:46, VWR2018 said: OBDEleven has a very simple way to turn that off. Can you post the instruction string please? I have VCDS so hopefully would be a able to find it there. Edit: Actually, don't worry, found it on VWWatercooled. I'll give it a tweak when I get home. Edit2: Done via coding in Module 13, Byte 2, 67 changes to 47 using the Long Coding helper after ticking the box under. Thx. Edited January 16, 2019 by GolfRWag Updates Quote Link to comment Share on other sites More sharing options...
xSCYTHERx Posted January 21, 2019 Report Share Posted January 21, 2019 Quick question in regards to the mirror dipping when putting the car in reverse. I have the mirror dial set on L and when I pop the car into reverse the mirror drops so I can see the kerb - excellent feature. However if I then put the car back into N or D to drive away again the mirror doesnt return to its normal position? If I flip the mirror dial back to the centre then it does come back up, or if I turn the car off and on. Any thoughts? What am I missing here? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.