davetherave Posted August 23, 2018 Report Share Posted August 23, 2018 Just some advice regarding changing in and out of race mode, or starting cold and driving in race mode. Is it ok for me to start the car in race mode and drive and floor it, not that I normally do that but seeing what the general consensus is. I read about people waiting until its warmed up first? Also when driving do you guys think its ok to just switch into race whilst driving along? Or wait until you hit a red light or stop before switching? Does switching mid driving have a negative effect on the vehicle? I try to switch when i get to a red light, but often switch mid driving just to get some kick or get around mr uber who is driving 10mph with out any idea where he is or where he is going? Also is switching in and out of race bad? is it best to just leave it in race for longer periods rather than lots of short in and out? Quote Link to comment Share on other sites More sharing options...
Ferret Posted August 23, 2018 Report Share Posted August 23, 2018 I imagine most people wait for the oil to warm up before flooring it. Otherwise I switch to race mode whilst moving and can't imagine it does any harm. The Doc and goodbadboy 2 Quote Link to comment Share on other sites More sharing options...
Spinstorm Posted August 23, 2018 Report Share Posted August 23, 2018 I believe it is recommended that you don’t boot it as soon as you turn it on. Give it 5 minute before you do that. Having said that my RS3 often tells me that it has limited the Revs when it is turned on to 5.5k until it’s warmed up (it’s a feature of the car). However for me to actually rev it that high id have to be doing 70mph in 2nd gear which is never going to happen in Auto gearbox mode. So what I take from that is that if you have an auto car probably not a huge concern. If you have manual it could be if you drive like an idiot. As for changing modes I don’t see that it makes any difference when you do it. goodbadboy 1 Quote Link to comment Share on other sites More sharing options...
Booth11 Posted August 23, 2018 Report Share Posted August 23, 2018 It’s always advisable to get the oil up to temp of around 90° before flooring it (any mode). Flooring it from cold start is not good good for the engine and components especially if done regularly. Switching modes mid drive shouldn’t pose issues. No need to stop to switch modes. Dickie-D 1 Quote Link to comment Share on other sites More sharing options...
jds Posted August 23, 2018 Report Share Posted August 23, 2018 Thing is, why would you want drive it like a loon from start off anyway. There’s another thread on here with a guy suffering a big hole in his engine block, I’m not at all suggesting he was driving it hard, common sense should tell you you never drive a cold engine hard. Always warm up the engine before hand Raiden and ItsJustaR 2 Quote Link to comment Share on other sites More sharing options...
davetherave Posted August 23, 2018 Author Report Share Posted August 23, 2018 5 minutes ago, jds said: Thing is, why would you want drive it like a loon from start off anyway. There’s another thread on here with a guy suffering a big hole in his engine block, I’m not at all suggesting he was driving it hard, common sense should tell you you never drive a cold engine hard. Always warm up the engine before hand yeah I saw that lol, I do not want to drive like a loon on start up and never have, but just want to get as much knowledge as possible so avoid having a big axe wound in my engine lol Quote Link to comment Share on other sites More sharing options...
Nitto Posted August 23, 2018 Report Share Posted August 23, 2018 Always let the engine warm up to full operational temperature before planting your right foot. I am always keeping an eye on revs when cold and don't drive over 3,000 rpm until oil has reached 70 degrees. Then still not driving hard until oil temp over 95 degrees. goodbadboy and Dickie-D 1 1 Quote Link to comment Share on other sites More sharing options...
ellixtt Posted August 23, 2018 Report Share Posted August 23, 2018 Best practise is to give it a good 5 -10 mins of driving before hammering it, I keep it in normal mode until it warms up and change around 2k rpm and then switch to Race if my foots feeling heavy. I can’t imagine how changing modes would affect the car negatively otherwise it would be stated. goodbadboy 1 Quote Link to comment Share on other sites More sharing options...
Restate2018 Posted August 23, 2018 Report Share Posted August 23, 2018 Easy enough to set the display to show the engine oil temp, wait for 90 then good to go - it can take more like 10 minutes if its really cold... Jon R306 and gregozedobe 1 1 Quote Link to comment Share on other sites More sharing options...
JaseW Posted August 23, 2018 Report Share Posted August 23, 2018 Mine is DSG and it won’t let me rev over 4K until it has warmed up anyway. No issues with changing modes mid drive etc. Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
KeithRann Posted August 23, 2018 Report Share Posted August 23, 2018 Why do people feel they need to switch to Race mode to floor it? It's the same power etc. just the throttle sensitivity and soundaktor is turned up a notch surely? BlackGolfR, JaseW, leonmac and 2 others 5 Quote Link to comment Share on other sites More sharing options...
JaseW Posted August 23, 2018 Report Share Posted August 23, 2018 Why do people feel they need to switch to Race mode to floor it? It's the same power etc. just the throttle sensitivity and soundaktor is turned up a notch surely?Steering and suspension settings are changed too. But agree no need to switch to race mode to floor it, just feels much more dramatic Sent from my iPhone using Tapatalk goodbadboy 1 Quote Link to comment Share on other sites More sharing options...
KeithRann Posted August 23, 2018 Report Share Posted August 23, 2018 Steering and suspension settings are changed too. But agree no need to switch to race mode to floor it, just feels much more dramatic Sent from my iPhone using TapatalkOk, the steering gets unnecessarily heavier too and the suspension firms up if you have DCC. Sent from my SM-G930F using Tapatalk goodbadboy and ItsJustaR 2 Quote Link to comment Share on other sites More sharing options...
ItsJustaR Posted August 23, 2018 Report Share Posted August 23, 2018 Thing is, why would you want drive it like a loon from start off anyway. There’s another thread on here with a guy suffering a big hole in his engine block, I’m not at all suggesting he was driving it hard, common sense should tell you you never drive a cold engine hard. Always warm up the engine before hand Lol right. People learn over time enough especially if they are new to the car world. Us car guys know it's a very stupid and bad idea to not let your car warm up before ripping around. I always wait till I hit 170 degrees just to be safe which doesn't take no more than 5-10 minutes out of your life anyways.Sent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
ItsJustaR Posted August 23, 2018 Report Share Posted August 23, 2018 If you wait 5-10 minutes after driving or let your car warm up to about 170 degrees you won't have any problems. If you don't you run the big risk of major wear and tear and it's hard on all the internals in general. Things need to lubricate, expand, and adjust properly etc.Sent from my SM-G955U using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.